Modelling Regional Scale Surface Energy Exchanges And Cbl Growth In A Heterogeneous, Urban-Rural Landscape

Over the last decade, simple models of theconvective boundary layer (CBL) have beensuggested as an approach to inferring regionallyaveraged land-air exchanges of heat, water and tracegases, because the properties of the CBL respond toan average of the underlying small-scaleheterogeneity. This paper explores the use of anintegral CBL method to infer regionally averagedfluxes in a landscape that has at least three majorsources of heterogeneity – irrigated andnon-irrigated rural land use and a large urban area(Sacramento region, California).The first part of the paper assesses the validity ofthe simple slab model of the CBL – this isintegrated forwards in time using local-scalemeasured heat and water vapour fluxes, to predictmixed-layer depth, temperature and humidity. Of thefour different CBL growth schemes used, the Tennekesand Driedonks model is found to give the bestperformance. Evaluation of the model performancewith different weightings of heat and water vapourfluxes based on the land use characteristics in theregion suggest that the source area for theboundary-layer sonde measurements is larger thanphysically-based estimates would suggest.Finally, measured time series of potentialtemperature are used to infer regionally averagedsensible heat fluxes using an integral CBL (ICBL)method. These ICBL fluxes are compared with thosemeasured at the local scale over the three land usetypes that comprise the region of interest. They arefound to be closest to the heat fluxes calculated byappropriately weighting the measured heat fluxes inthe source area calculated for the ICBL. We concludethat the integral CBL budget method providesadequate estimates of regionally-averaged surfaceheat fluxes in a landscape that is characterised bysurface types with distinctly different surfaceenergy budgets.     

Characteristics of secondary circulations over an inhomogeneous surface simulated with large-eddy simulation

Large-eddy simulation is used to study secondary circulations in the convective boundary layer modulated as a result of horizontally varying surface properties and surface heat fluxes over flat terrain. The presence of heat flux heterogeneity and its alignment with respect to geostrophic wind influences the formation, strength and orientation of organized thermals. Results show boundary-attached roll formation along heat flux maxima in the streamwise direction. The streamwise organization of the updrafts and downdrafts formed downwind of heterogeneities leads to counter-rotating secondary circulations in the crosswind plane. The distribution of resolved-scale pressure deviations shows large pressure gradients in the crosswind plane. Spanwise and vertical velocity variances and heat flux profiles depict considerable spatial variability compared to a homogeneous forest simulation. Secondary circulations are observed for various ambient wind scenarios parallel and perpendicular to heterogeneities. In the presence of increased wind speed, thermals emerging from the heat flux heterogeneity are elongated, and organize along and downwind of large-scale heterogeneity in the streamwise direction. Simulation with a reduced heat flux shows a shallower circulation with a lower aspect ratio. Point measurements of heat flux inside the roll circulation could be overestimated by up to 15–25% compared to a homogeneous case.     

北京城市下垫面的非均匀性度量研究

城市下垫面非均匀性度量研究对于改进中尺度数值模式、提高城市气象预报准确率具有重要意义.基于分形布朗运动理论和Landsat-TM卫星遥感图像,估算了2011年北京典型下垫面类型个例和整个空间区域的分数维,由此来度量北京城市下垫面的非均匀性特征.研究结果显示:分数维能有效度量北京城市下垫面的非均匀程度,典型下垫面类型的分数维高低顺序为商业区 >大型居民区 >城市绿地 >农田>林地 >水体;北京六环内区域及郊区城镇地表非均匀特征明显,分数维一般在2.50以上,北京城市中心(二环内)存在一个分数维相对低值区,二环—四环之间区域分数维普遍较高,在2.70以上,五环以外分数维则不断降低,反映出北京城市下垫面非均匀性从中心向外呈低—高—低的空间分布;下垫面类型中建筑用地、绿地、未利用地、农田、林地和水体的平均分数维分别为2.71、2.62、2.55、2.38、2.30和2.28,分数维值的高低反映了城市下垫面类型的非均匀程度大小,对定量描述城市边界层参数的复杂特征具有参考意义.     

辫状河油藏层内非均质性及其对剩余油分布的影响

辫状河油藏是我国主要油藏类型之一,目前普遍进入高含水期,层内非均质严重制约其高效开发. 本文以孔店油田馆陶组岩心、测井资料为基础,结合生产开发数据,分析了辫状河油藏层内非均质性及其对剩余油分布的影响. 结果表明:研究区储层成因为辫状河道及心滩. 辫状河道为正韵律,物性差异大,夹层薄;而心滩以复合正韵律为主,物性差异中等偏强,夹层厚. 由心滩对应的采油井夹层控制的剩余油较多,垂积体的上部易形成剩余油富集区,挖掘潜力大.     

开展含水层非均质性数据融合研究

提出应大力开展含水层非均质性的数据融合研究。指出应充分吸收利用相邻学科已有的研究成果,从易到难,首先应将军事领域已相对成熟的数据融合技术移植过来,开展孔隙含水层非均质性的数据融合研究。论述了含水层非均质性数据融合研究的主要研究思路和研究内容,并展示了初步研究成果。     

An investigation of upper mantle heterogeneity beneath the Archaean and Proterozoic crust of western Canada from Lithoprobe controlled-source seismic experiments

Observations of upper mantle reflectivity at numerous locations around the world have been linked to the presence of a heterogeneous distribution of rock types within a broad layer of the upper mantle. This phenomenon is observed in wide-angle reflection data from Lithoprobe's Alberta Basement Transect [the SAREX and Deep Probe experiments of 1995] and Trans-Hudson Orogen Transect [the THoRE experiment of 1993]. SAREX and Deep Probe image the Archaean lithosphere of the Hearne and Wyoming Provinces, whereas THoRE images the Archaean and Proterozoic lithosphere of the Trans-Hudson Orogen and neighbouring areas.Finite-difference synthetic seismograms are used to constrain the position and physical properties of the reflective layer. SAREX/Deep Probe modelling uses a 2-D visco-elastic finite-difference routine; THoRE modelling uses a pseudospectral algorithm. In both cases, the upper mantle is parameterized in terms of two media. One medium is the background matrix; the other is statistically distributed within the first as a series of elliptical bodies. Such a scheme is suitable for modelling: (1) variations in lithology (e.g., a peridotite matrix with eclogite lenses) or (2) variations in rheology (e.g., lenses of increased strain within a less strained background).The synthetic seismograms show that the properties of heterogeneities in the upper mantle do not change significantly between the two Lithoprobe transects. Beneath the Trans-Hudson Orogen in Saskatchewan, the layer is best modelled to lie at depths between 80 and 150 km. Based on observations from perpendicular profiles, anisotropy of the heterogeneities is inferred. Beneath the Precambrian domains of Alberta, 400 km to the west, upper mantle heterogeneities are modelled to occur between depths of 90 and 140 km. In both cases the heterogeneous bodies within the model have cross-sectional lengths of tens of kilometers, vertical thicknesses less than 1 km, and velocity contrasts from the background of − 0.3 to − 0.4 km/s. Based on consistency with complementary data and other results, the heterogeneous layer is inferred to be part of the continental lithosphere and may have formed through lateral flow or deformation within the upper mantle.     

The Role of Lithospheric Mantle Heterogeneity in the Generation of Plio-Pleistocene Alkali Basaltic Suites from NW Harrat Ash Shaam (Israel)

Plio-Pleistocene volcanism in the Golan and Galilee (northeasternIsrael) shows systematic variability with time and location:alkali basalts were erupted in the south during the Early Pliocene,whereas enriched basanitic lavas erupted in the north duringthe Late Pliocene (Galilee) and Pleistocene (Golan). The basaltsshow positive correlations in plots of ratios of highly to moderatelyincompatible elements versus the concentration of the highlyincompatible element (e.g. Nb/Zr vs Nb, La/Sm vs La) and indiagrams of REE/HFSE (rare earth elements/high field strengthelements) vs REE concentration (e.g. La/Nb vs La). Some of thesecorrelations are not linear but upward convex. ⁸⁷Sr/⁸⁶Sr ratiosvary between 0·7031 and 0·7034 and correlate negativelywith incompatible element concentrations and positively withRb/Sr ratios. We interpret these observations as an indicationthat the main control on magma composition is binary mixingof melts derived from two end-member mantle source components.Based on the high Sr/Ba ratios and negative Rb anomalies inprimitive mantle normalized trace element diagrams and the moderateslopes of MREE–HREE (middle REE–heavy REE) in chondrite-normalizeddiagrams, we suggest that the source for the alkali basalticend-member was a garnet-bearing amphibole peridotite that hadexperienced partial dehydration. The very high incompatibleelement concentrations, low K content, very low Rb contentsand steep MREE–HREE patterns in the basanites are attributedto derivation from amphibole- and garnet-bearing pyroxeniteveins. It is suggested that the veins were produced via partialmelting of amphibole peridotites, followed by complete solidificationand dehydration that effectively removed Rb and K. The requirementfor the presence of amphibole limits both sources to lithosphericdepths. The spatial geochemical variability of the basalts indicatesthat the lithosphere beneath the region is heterogeneous, composedof vein-rich and vein-poor domains. The relatively uniform ¹⁴³Nd/¹⁴⁴Nd(Nd = 4·0–5·2) suggests that the two mantlesources were formed by dehydration and partial melting of anoriginally isotopically uniform reservoir, probably as a resultof a Paleozoic thermal event. KEY WORDS: basanites; lithospheric heterogeneity; magma mixing; amphibole peridotite; pyroxenites     

Heterogeneous characteristics of streambed saturated hydraulic conductivity of the Touchet River,south eastern Washington,USA

Traditionally a streambed is treated as a layer of uniform thickness and low saturated hydraulic conductivity (K) in surface‐ and ground‐water studies. Recent findings have shown a high level of spatial heterogeneity within a streambed and such heterogeneity directly affects surface‐ and ground‐water exchange and can have ecological implications for biogeochemical transformations, nutrient cycling, organic matter decomposition, and reproduction of gravel spawning fish. In this study a detailed field investigation of K was conducted in two selected sites in Touchet River, a typical salmon spawning stream in arid south eastern Washington, USA. In‐stream slug tests were conducted to determine K following the Bouwer and Rice method. For the upper and lower sites, each 50 m long and 9 m wide and roughly 20 m apart, a sampling grid of 5 m longitudinally and 3 m transversely was used. The slug tests were performed for each horizontal coordinate at 0·3–0·45, 0·6–0·75, 0·9–1·05 and 1·2–1·35 m depth intervals unless a shallower impenetrable obstruction was encountered. Additionally, water levels were measured to obtain vertical hydraulic gradient (VHG) between each two adjacent depth intervals. Results indicated that K ranged over three orders of magnitude at both the upper and lower sites and differed between the two sites. At the upper site, K did not differ significantly among different depth intervals based on nonparametric statistical tests for mean, median, and empirical cumulative distribution, but the spatial pattern of K varied among different depth intervals. At the lower site, K for the 0·3–0·45 m depth interval differed statistically from those at other depth intervals, and no similar spatial pattern was found among different depth intervals. Zones of upward and downward water flow based on VHG also varied among different depth intervals, reflecting the complexities of the water flow regime. Detailed characterization of the streambed as attempted in this study should be helpful in providing information on spatial variations of streambed hydraulic properties as well as surface‐ and ground‐water interaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantifying preferential flow in soils: A review of different techniques

Preferential flow (PF) in soil has both environmental and human health implications since it favours contaminant transport to groundwater without interaction with the chemically and biologically reactive upper layer of soil. PF is, however, difficult to measure and quantify. This paper reviews laboratory and field techniques, such as breakthrough curves, dye tracing, and scanning techniques, for evaluating PF in soil at different scales. Advanced technologies, such as scanning techniques, have increased our capability to quantify transport processes within the soil with minimal soil disturbance. Important issues with respect to quantifying PF concern large-scale studies, frozen soil conditions, tracing techniques for particles and gases, a lack of simple mathematical tools for interpreting field data, and the lack of a systematic approach for comparing PF data resulting from different measurement techniques. Also, more research is required to quantify the relative importance of the various PF processes that occur in soil rather than the integrated result of all PF processes in soils.     

Three-dimensional elastic wave scattering and diffraction due to a rigid cylinder embedded in an elastic medium by a point source

The formal solutions of displacement field to the problem of elastic wave scattering and diffraction due to an infinitely long rigid cylinder embedded in an infinite elastic medium by an impulsive point source have been obtained in the integral form. The integrals for the reflected and the diffracted waves both in the shadow zone and in the illuminated zone are evaluated asymptotically for the early time motion by the Reisdue-Cagniard method and the Saddle-point-Cagniard method.Numerical results of the diffractedP, S andPS waves at a fixed circum-distance from the surface of the rigid cylinder show noticeably that (1) the energy partition for the diffractedS wave is small in comparison with that for the diffractedP wave, (2) the wave form of the diffractedS wave is broader and more diffused than that of the diffractedP wave, (3) the direction of the radial motions of the diffractedP andS waves varies as a function of the observational point, and (4) the energy partition for the diffractedP wave is much smaller than that for the direct or the reflectedP waves.This paper has been presented at the 46th Annual International Meeting of Society of Exploration Geophysicists in Houston, Texas, Oct. 28, 1976.