黄河源区多、少雪年土壤冻融特征分析

利用2011年10月至2017年12月黄河源区鄂陵湖野外观测数据,对比分析多雪年与少雪年土壤冻结与消融时间、土壤温湿度、地表能量分量的变化特征。结果表明:多雪年地表反照率偏高,净辐射偏低,地表感热输送偏低,土壤由热“源”转为热“汇”的时间晚于少雪年。积雪可减少土壤吸收辐射能量,减少地表感热通量,在土壤完全冻结期与消融期增大地表潜热通量,在完全冻结期,减少土壤向大气的热输送,在消融期,减少大气向土壤的热输送。积雪在冻结期有降温作用,使得多雪年土壤较早发生冻结,且同一时期土壤温度偏低;在完全冻结期有保温作用,使得土壤温度偏高;在消融期有保温(“凉”)作用,使得消融较晚,且同一时期土壤温度偏低。在整个积雪年内,多雪年浅层土壤湿度高于少雪年,积雪对浅层土壤有保湿作用。积雪使土壤开始冻结时间有所提前,开始消融的时间有所滞后,可延长该年土壤完全冻结持续天数。     

广西贵港地区极端高温日的时间变化特征及其环流背景

极端高温事件是我国南方夏季频发的天气灾害,区域性明显,持续性高温事件的环流背景及其影响机理值得深入研究。基于台站观测资料和欧洲中期天气预报中心的再分析资料,对1961—2010年广西东南部贵港地区发生的高温事件的时间变化规律及持续性高温天气过程对应的大气环流场演变进行了统计诊断分析。(1)广西东南部贵港地区的高温日主要出现在6—9月,其中7—8月是高温日频发的月份;3天以上的持续高温日数占总高温日数的6成;8—9月的高温日数具有明显的增加趋势。(2)桂东南在6—9月的持续性高温天气与一些特定的天气系统的存在有紧密联系。持续的下沉运动是造成广西东南部升温的主要原因,而导致垂直下沉运动的主要原因又与大陆高压、副热带高压或南海-菲律宾海出现的热带低压系统的北移路径偏东有关,持续时间较长的高温过程还与热带气旋的活动时间较长和强度偏强有关。(3)高压控制的晴空少云天气可导致地表接收更多的太阳辐射,使得地表温度的升高,从而导致地表向上的长波辐射及感热通量增强,加热近地面空气,这些有利于近地面升温的热力过程以及垂直下沉绝热加热过程的增强,使得高温天气过程得以维持。      

福建省晋江市城市热岛强度时空变化特征分析

利用传统的气象站法, 结合空间统计学方法(普通克里金插值法), 对福建省晋江市2010—2014年40个自动气象站逐小时温度资料加以计算处理, 分析了晋江市年、季、昼夜热岛强度时空变化规律。(1)晋江市年、季、昼夜热岛强度都呈带状分布, 等值线呈西南-东北走向, 年、季、昼夜变化趋势显著, 北部热岛强度高于南部。五年间热岛强度持续增强, 但增幅不大, 增速放缓。(2)城市化水平的提高, 会导致热岛强度高值出现季节提前, 故旅游区秋冬季热岛强度高于春夏季, 中心城区和产业经济区夏秋季热岛强度高于冬春季。(3)晋江市热岛效应昼夜空间分布格局差异性大, 夜间热岛强度显著高于白天, 最低值出现在14—16时, 中心城区和产业经济区最低值出现时间较旅游区略推迟, 三个功能区的最高值均出现在凌晨。      

Polar WRF模式海冰密集度方案对北极海雾模拟效果的个例研究

全球变暖的背景下,北极航线的常规通航甚至商业运营有望实现,而海雾会严重影响航道上船只的航行安全。海冰的存在使海气之间相互作用变得更为复杂,是研究北极海雾不可忽略的因素。船载观测发现,与中纬度常见平流冷却雾形成时气温下降速度往往超过海水降温速度不同,北极海雾发生时海冰的存在还会使海水降温速度超过空气降温速度。然而目前海冰分布是否会影响模式模拟海雾的准确性还不得而知,因此本文利用Polar WRF（Polar Weather Research and Forecasting）模式模拟了中国第七次北极考察中观测到的一次海雾过程,并进行海冰密集度敏感性试验。通过与船载观测和欧洲中期天气预报中心再分析数据比对发现,在低浮冰区内（海冰密集度小于50%）考虑海冰分布时可以更加准确地刻画潜热通量与水汽通量,模拟出与观测事实相符的表层空气降温与增湿过程以及相对湿度的变化,因此能够更好地刻画海雾的三维结构及其生消演变。     

钢框架-钢筋混凝土剪力墙结构的地震能量反应分析

以17个钢框架-钢筋混凝土剪力墙混合结构为样本,选取结构自振周期T和结构刚度特征值λ作为分析参数,分析它们在不同类型地震动下的地震能量反应。研究表明,混合结构体系在地震作用下总输入能的大小主要与结构的自振周期以及地震动类型有关,剪力墙与钢框架之间的刚度关系对总输入能影响不大;总输入能等效速度谱的形态受地震动类型的影响很大,同一地震动作用下,幅值与等效速度谱值之间基本能够维持线性增长的关系,但随着结构塑性发展的加剧,这种线性增长关系的离散度会变大;在结构自振周期不变化的前提下,结构的滞回耗能比以及底部剪力墙承担滞回耗能的比例都会随结构刚度比的增大而减小。     

Nonlinear aspects of energy dissipation in wood-panel joints

The joints connecting vertical and horizontal elements are the "weak link" in structural systems assembled from wood panels. If they are too weak, local failures may occur, resulting in performance that is significantly below expectations. If they are too resistant, the joints may be unable to dissipate energy during vibrations, thus possibly initiating a fast progressive failure. This paper re-processes and re-elaborates the results of shaking table tests previously carried out by the author and other co-workers. The goal is to assess the feasibility of a joint which is able to dissipate energy during vibration, without degrading the connection performance.     

Damping characteristics of friction damped braced frame and its effectiveness in the mega-sub controlled structure system

Based on energy dissipation and structural control principle, a new structural configuration, called the mega- sub controlled structure (MSCS) with friction damped braces (FDBs), is first presented. Meanwhile, to calculate the damping coefficient in the slipping state a new analytical method is proposed. The damping characteristics of one-storey friction damped braced frame (FDBF) are investigated, and the influence of the structural parameters on the energy dissipation and the practical engineering design are discussed. The nonlinear dynamic equations and the analytical model of the MSCS with FDBs are established. Three building structures with different structural configurations, which were designed with reference to the conventional mega-sub structures such as used in Tokyo City Hall, are comparatively investigated. The results illustrate that the structure presented in the paper has excellent dynamic properties and satisfactory control effectiveness.     

Performance of a base isolator with shape memory alloy bars

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.     

近区瞬变场的频率效应与大深度探测能力的研究

在时域中,磁源近区瞬变场的时间特性取决于场源所含低频谱的分数幂.对于磁感应强度Bz(t)∝∑iω3/2i,对于感应电势εz(t)∝∑iω5/2i.这表明,现有的瞬变电磁探测系统只适用于浅部勘查,对于大深度的勘查,需要研制超强能量且轻便化的场源(发送系统),同时完善超导磁强计(接收系统)的实用化.     

基于FSDAF模型的干旱区典型绿洲城市夏季地表热岛效应时空演变研究

全球城市化进程加快引起的干旱区绿洲城市热岛效应变化及其生态环境问题已成为当前国内外城市气候、环境和生态等领域的研究热点之一.基于遥感热红外通道反演的地表温度(Land surface temperature,LST)是开展城市地表热岛(Surface urban heat island,SUHI)效应监测研究的关键参数...