鄂尔多斯盆地中部奥陶系方解石脉中包裹体流体势研究

结合前人研究成果，归纳出了一种利用盐水包裹体均一温度与盐度确定流体势的方法，并对鄂尔多斯盆地中部气田奥陶系方解石脉中包裹体进行了流体势计算，推算出了古流体运移方向。     

几种常见矿物的接触角测定及其讨论

为了评价矿物表面与特征液体的界面能量，分别测定了长石、石英、黑云母、方解石、萤石和黄铁矿等7种常见矿物与水、正庚烷和正丁醇的接触角，并计算了相应的表面自由能。结果表明同一矿物不同结晶面(晶面)的接触角有一定的差异，这一差异与矿物结构面上原子种类和相对含量差异有一定的对应关系。     

Scaling effects on modeled surface energy-balance components using the NOAH-OSU land surface model

As surface exchange processes are highly non-linear and heterogeneous in space and time, it is important to know the appropriate scale for the reasonable prediction of these exchange processes. For example, the explicit representation of surface variability has been vital in predicting mesoscale weather events such as late-afternoon thunderstorms initiated by latent heat exchanges in mid-latitude regions of the continental United States. This study was undertaken to examine the effects of different spatial scales of input data on modeled fluxes, so as to better understand the resolution needed for accurate modeling. A statistical procedure was followed to select two cells from the Southern Great Plains 1997 hydrology experiment region, each 20 km×20 km, representing the most homogeneous and the most heterogeneous surface conditions (based on soil and vegetation) within the study region. The NOAH-OSU (Oregon State University) Land Surface Model (LSM) was employed to estimate surface energy fluxes. Three scales of study (200 m, 2 and 20 km) were considered in order to investigate the impacts of the aggregation of input data, especially soil and vegetation inputs, on the model output. Model results of net radiation and latent, sensible and ground heat fluxes were compared for the three scales. For the heterogeneous area, the model output at the 20-km resolution showed some differences when compared with the 200-m and 2-km resolutions. This was more pronounced in latent heat (12% decrease), sensible heat (22% increase), and ground heat flux (44% increase) estimation than in net radiation. The scaling effects were much less for the relatively homogeneous land area with 5% increase in sensible heat and 4% decrease in ground heat flux estimation. All of the model outputs for the 2- and 20-km resolutions were in close agreement. The results suggested that, for this study region, soils and vegetation input resolution of about 2 km should be chosen for realistic modeling of surface exchange processes. This resolution was sufficient to capture the effects of sub-grid scale heterogeneity, while avoiding the data and computational difficulties associated with higher spatial resolutions.     

Efficiency of base isolation systems in structural seismic protection and energetic assessment

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.     

Velocity structure of uppermost mantle beneath North China from Pn tomography and its implications

20301 Pn arrival time data are collected from the seismological bulletins of both national and regional seismic networks. Pn travel time residuals are tomographically inverted for the Pn velocity structure of uppermost mantle beneath North China. The result indicates that the average Pn velocity in North China is 7.92 km/s, and the velocity varies laterally from ?0.21 to +0.29 km/s around the average. The approximately NNE trending high and low velocity regions arrange alternatively west-eastward. From west to east we can see high velocity in the middle Ordos region, the Shanxi graben low, the Jizhong depression high, the west Shandong uplift and Bohai Sea low, and the high velocity region to the east of the Tanlu fault. In the southern boundary zone of the North China block, except for the high velocity in the Qingling Mountains region, the velocity is generally lower than the average. Obvious velocity anisotropy is seen in the Datong Cenozoic volcanic region, with the fast velocity direction in NNE-SSW. Notable velocity anisotropy is also seen around the Bay of Bohai Sea, and the fast velocity directions seem to show a rotation pattern, possibly indicating a flow-like deformation in the uppermost mantle there. The Pn velocity variations show a reversed correlation with the Earth's heat flow. The low Pn velocity regions generally show high heat flow, e.g., the Shanxi graben and Bohai Sea region. While the high Pn velocity regions usually manifest low heat flow, e.g., the region of Jizhong depression. This indicates that the Pn velocity variation in the study region is mainly aroused by the regional temperature difference in the uppermost mantle. Strong earthquakes in the crust tend to occur in the region with the abnormal low Pn velocity, or in the transition zone between high and low Pn velocity regions. The earthquakes in the low velocity region are shallower, while that in the transition zone are deeper.     

A quantitative study of the energy release in the aftershocks of the Bhuj earthquake, 2001, India, using Lg phase

The devastating earthquake on 26 January 2001 at Bhuj, India, resulted in large-scale death and destruction of properties of several million US dollars. The moment magnitude of the earthquake was 7.7 and its maximum focal intensity exceeded X in MM scale. The rate of aftershocks of this earthquake, recorded at Gauribidanur seismic array station (GBA), shows a monotonic decay with time superposed with oscillations. For the Indian continent the Lg phase is a prominent arrival at regional distances. The estimate of Lg amplitude is obtained by optimally fitting the Lg wave train to a exponential decay curve. The logarithm of these amplitudes and logarithm of root mean square (rms) value of actual amplitudes of the Lg are calibrated with USGS m_b to create a local m_bLg magnitude scale. The energy released from these aftershocks is calculated from the rms value of Lg phase. The plot of cumulative energy release with time follows the power law of the form t^p, superposed with oscillations. The exponent of the power law, p, is estimated both by a time-window scanning method and by an interpolation method. The value of p is 0.434 for time-window scanning method and 0.432 for the interpolation method. The predominant periods found in the oscillatory part of the cumulative energy, obtained by differencing the observed from the power law fit, are 10.6, 7.9, 5.4, 4.6 and 3.5 h for time-window scanning method. The corresponding periods for interpolation method are 13.4, 11.5, 7.4, 4.2, 3.5, 2.6 and 2.4 h.     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

遥感技术在腾冲西南地区地热资源研究预测中的应用

利用TM数据,对滇西腾冲西南地区进行地质构造解译,阐明了该区多地热活动的原因.通过对TM6波段热红外异常信息的提取,经构造解译与地热异常分布区的叠加分析,发现了该区地热富集的规律性,提出了地热田的遥感影像模式.据此,预测出腾冲西南地区62处水热活动Ⅰ级异常区.     

Simulation of marine boundary layer characteristics using a 1-D PBL model over the Bay of Bengal during BOBMEX-99

The characteristic features of the marine boundary layer (MBL) over the Bay of Bengal during the southwest monsoon and the factors influencing it are investigated. The Bay of Bengal and Monsoon Experiment (BOBMEX) carried out during July–August 1999 is the first observational experiment under the Indian Climate Research Programme (ICRP). A very high-resolution data in the vertical was obtained during this experiment, which was used to study the MBL characteristics off the east coast of India in the north and south Bay of Bengal. Spells of active and suppressed convection over the Bay were observed, of which, three representative convective episodes were considered for the study. For this purpose a one-dimensional multi-level PBL model with a TKE-ε closure scheme was used. The soundings, viz., the vertical profiles of temperature, humidity, zonal and meridional component of wind, obtained onboard ORV Sagar Kanya and from coastal stations along the east coast are used for the study. The temporal evolution of turbulent kinetic energy, marine boundary layer height (MBLH), sensible and latent heat fluxes and drag coefficient of momentum are simulated for different epochs of monsoon and monsoon depressions during BOBMEX-99.The model also generates the vertical profiles of potential temperature, specific humidity, zonal and meridional wind. These simulated values compared reasonably well with the observations available from BOBMEX.