Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.     

Analysis of rock structure stability in coal mines

In this paper, the theory of limit point instability is used to analyse the stability of rock structures in coal mines. A general method of analysing stability of rock structures is put forward and a uniform instability condition of rock structures is set up. Some instability phenomena, such as rock bursts in circular roadways, pillars and long walls, and the outburst of coal and gas from circular roadways, are discussed analytically. At a later stage, the critical point of rock structure instability is determined. The influence of relative parameters (such as the mechanical properties of rock, coal, and the geometric sizes) on the stability of the rock structures is carefully analysed. Copyright © 2005 John Wiley & Sons, Ltd.     

Mechanism of loading on plates due to explosive detonation

This paper investigates the various mechanisms and parameters that are responsible for delivering impulse to a vehicle that is unfortunate enough to detonate a buried mine. Small scale tests are used to examine the effects of air blast or ejected sand in imparting impulse to a plate that is located above the surface of the saturated soil that contains the explosive. Parameters such as confinement, stand off distance, depth of burial of the explosive, density of the soil, and saturation level of the soil are also examined.     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

“雪龙号”2003北极航次气相多环芳烃纬度分布观测

2003年“雪龙号”北极科学考察期间,对沿途海洋大气进行采样,分析其中气相多环芳烃的空间分布。结果显示,气相中主要是2-4环的多环芳烃,其中菲为主要的化合物,平均占到总多环芳烃的55.1%。在整个航程的广泛区域尺度内,气相总多环芳烃浓度在1043.9-92993.1pg/m3。空间分布上,远东亚的海面>北太平洋海面>北极圈以内海面;总多环芳烃的浓度随纬度升高呈现显著降低的趋势。通过Clausius-Clapeyron方程对浓度和温度相互关系的分析表明,温度是控制气相多环芳烃长距离传输的主要因素。     

鲁西煤田构造类型及形成机制

根据鲁西煤田断裂、褶曲构造的独特特征,分析了控煤构造的主要类型及形成机制,由于郯庐、聊考断裂长期左行平移,控制了鲁西煤田构造演化特征,形成了鲁中“掀斜式”断块构造和鲁西南“堑垒式”断块构造两种截然不同的构造格局。并对今后找煤工作的方向进行了初步的探讨。     

盘江火铺煤矿矸石场滑坡预警、征兆特征及其防治

本文通过火铺煤矿矸石场滑坡的调查研究,在对其地质环境条件分析的基础上,论述滑坡的特征,探讨其形成机制,提出了防治措施,可供该矿山地质环境的保护与修复参考。     

太湖表层沉积物多环芳烃的空间分布、来源及其风险

随着太湖流域社会与经济的发展,多环芳烃(PAHs)在各种环境介质中逐渐累积,污染日益严重,可能对太湖生态环境及周边人体健康构成威胁。为探究太湖沉积物PAHs的来源及生态风险,于2021年12月在太湖采集30个表层沉积物样品,利用气相色谱-质谱联用仪(GC-MS)检测样品中16种PAHs含量;利用受体模型和苯并[a]芘(BaP)毒性当量法进行来源解析及生态风险评估,并将各来源贡献与毒性当量浓度相结合,量化源风险。结果表明,太湖表层沉积物中16种PAHs总含量介于124~592 ng/g之间,平均值为294 ng/g,中值为279 ng/g;高环多环芳烃(HMW PAHs)为主要组分,占∑PAHs的67%。高含量区域位于竺山湾、梅梁湾、贡湖湾和西太湖,与国内外其他湖泊沉积物相比,太湖沉积物PAHs含量处于较低水平。源解析的结果表明,太湖表层沉积物中PAHs交通排放源贡献率为29.1%、煤炭燃烧源贡献率为26.7%、生物质燃烧源贡献率为28.7%、石油源贡献率为15.6%。生态风险评价结果表明,交通排放源、生物质燃烧源、煤炭燃烧源和石油源的BaP毒性当量含量(TEQ_BaP)均值分别为19.34、17.81、16.33和9.1 ng/g,均小于70 ng/g,几乎处于无风险水平。西太湖、贡湖湾和梅梁湾的部分区域ΣTEQ_BaP大于70 ng/g属于潜在风险区,具有一定潜在毒性。在后续的污染治理中应重点关注太湖西北部地区污染物的排放。本研究可为沉积物中PAHs污染的研究提供数据支撑,为地方政府精准、高效地管控PAHs污染提供理论依据。     

鄂尔多斯盆地东缘煤储层微孔隙结构特征及其影响因素

在对鄂尔多斯盆地东缘58套采自不同层位不同地域煤样显微组分测试和低温液氮比表面测试的基础上,从比表面积、吸附曲线形态、阶段孔径结构分布、阶段孔径比表面积贡献、FHH分形特征几个方面刻画了煤储层微孔隙特征。同时,就“孔比表面积—孔隙结构—煤物质组成与化学结构”这一因果链,分析了鄂尔多斯盆地东缘煤微孔隙特征与煤变质程度、煤岩显微组分以及矿物组分与类型的关系。研究发现,Ro在0.60%~1.91%范围内,比表面积及FHH分形分维数先明显降低,Ro至1.3%后又略有回升,同时吸附回线“滞后环”及分形尺度对应的压力范围明显减小,孔径3~4 nm“墨水瓶”型孔明显减少乃至消失,并成为比表面积减少的主要贡献者。在相似煤级条件下,惰质组分较镜质组分有更多的比表面积贡献。粘土矿物组分含量>10%时,孔径3~4 nm“墨水瓶”型孔对比表面贡献明显,且随煤级增高影响作用相对加大。