Organism relics or kerogens in oils as oil-source rock correlation indicator

Organism relics or kerogens in oils are first obsenred by a confocal laser scanning microscope (CLSM) and a transmission electron microscope (TEM). The complexes of kerogens in oils are characterized by the presence of a great variety of microfossils or macerals. These kerogens in oils are mainly the residues of the original organic substances from which oil formed, and minor kerogens from enclosing rocks enter the oils, therefore, the components and types of the kerogens in crude oils can serve as an indirect indicator of oil-source rock correlation. This method was applied to Jurassic oils in the Junggar Basin and the Turpan-Hami Basin, and there are two types of the kerogens in oils: one containing a lot of macerals from terrestrial plants may derive from coals, and the other, characterized by a high content of microscopic algae, fungus spores and Acritarch, may originate from Permian organic matter. In addition, the reflectance of the vitrodetrinites in oils can be used as an indicator of oil-source rock correlation.     

煤内生裂隙的成因

根据多年对煤层裂隙的几何形态、分布规律、性质、与煤层的组合关系等的研究，认为煤内生裂隙是在煤化作用过程中，由于脱水、脱挥发分、煤体积收缩作用产生或者是由于煤化作用生成的水、气体及温度升高，孔隙产生膨胀，形成异常高压产生的；裂隙的发育方向因受区域应力场的控制，区域上具有一致性，且走向与最大主应力方向一致；内生裂隙属于张性裂隙。     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

含煤盆地煤储层后期改造形式及对煤层气选区影响--以华北克拉通选区为例

阐述了改造型含煤盆地煤储层被改造的两种形式；煤体结构的改造及构造煤的形成原因；后生充填物对煤层孔隙的改造及形成原因。提出了以构造煤发育程度作为改造型含煤盆地改造强度的一个指标。概述了华北克拉通盆地由中生代剪压应力转化为新生代剪张应力和拉张应力，而在盆地内形成以挤压构造为主到伸展构造为主的演化历程，及不同构造类型的区域分布，指出这种演化极易形成构造煤和后生充填物。提出将华北克拉通含煤盆地分为3种改造类型及其分布区域，分析了各自区域的煤储层物性及对煤层气开发选区的影响。提出应重视鄂尔多斯盆地侏罗纪煤层的煤层气．研究与开发．     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

太湖表层沉积物多环芳烃的空间分布、来源及其风险

随着太湖流域社会与经济的发展,多环芳烃(PAHs)在各种环境介质中逐渐累积,污染日益严重,可能对太湖生态环境及周边人体健康构成威胁。为探究太湖沉积物PAHs的来源及生态风险,于2021年12月在太湖采集30个表层沉积物样品,利用气相色谱-质谱联用仪(GC-MS)检测样品中16种PAHs含量;利用受体模型和苯并[a]芘(BaP)毒性当量法进行来源解析及生态风险评估,并将各来源贡献与毒性当量浓度相结合,量化源风险。结果表明,太湖表层沉积物中16种PAHs总含量介于124~592 ng/g之间,平均值为294 ng/g,中值为279 ng/g;高环多环芳烃(HMW PAHs)为主要组分,占∑PAHs的67%。高含量区域位于竺山湾、梅梁湾、贡湖湾和西太湖,与国内外其他湖泊沉积物相比,太湖沉积物PAHs含量处于较低水平。源解析的结果表明,太湖表层沉积物中PAHs交通排放源贡献率为29.1%、煤炭燃烧源贡献率为26.7%、生物质燃烧源贡献率为28.7%、石油源贡献率为15.6%。生态风险评价结果表明,交通排放源、生物质燃烧源、煤炭燃烧源和石油源的BaP毒性当量含量(TEQ_BaP)均值分别为19.34、17.81、16.33和9.1 ng/g,均小于70 ng/g,几乎处于无风险水平。西太湖、贡湖湾和梅梁湾的部分区域ΣTEQ_BaP大于70 ng/g属于潜在风险区,具有一定潜在毒性。在后续的污染治理中应重点关注太湖西北部地区污染物的排放。本研究可为沉积物中PAHs污染的研究提供数据支撑,为地方政府精准、高效地管控PAHs污染提供理论依据。     

内蒙古胜利煤田共生锗矿的成因地球化学初探

用统计和作图的分析方法,对内蒙古胜利煤田中共生锗矿床的锗品位与挥发分、灰分、硫分的关系进行了研究。结果表明煤中锗品位与挥发分呈正相关、与原煤灰分负相关、与洗煤灰分正相关关系;全区煤属中硫煤,锗品位与原煤和洗煤硫分均呈正相关关系,煤的灰分指数较低(3 579);锗分布不均匀,富锗煤矿明显属于断裂坳陷边缘沉积,锗品位可以在煤层的顶部、中部、底部同时或单个部位呈现高值,大多数煤层中部出现锗高品位值,这有别于以往所报道的锗品位只在煤层顶、底部相对富集的研究结论。认为胜利煤田锗主要与有机质结合;锗的有利聚集条件是水动力较弱、地下水位较低、强还原的停滞沼泽环境;泥炭聚集阶段有机质的吸附作用是锗的主要富集机制。     

Calcified roasting-acid leaching process of vanadium from low-grade vanadium-containing stone coal

The low-grade vanadium-containing stone coal used in this experiment was collected from Wuxi Coun- try, Chongqing City, China. The experiment focused on the vanadium recovery from roasted residue through opti- mizing the process conditions of an effective and environmentally-friendly technology, named calcified roast- ing-sulfuric acid leaching technology. By single-factor experiments and orthogonal experiments, the effects of roast- ing temperature, roasting time, sulfuric acid concentration and leaching time on the leaching ratio of vanadium were analyzed. The results showed that the leaching ratio of vanadium reached 85.5% under the proper technological con- ditions of roasting temperature=950℃, roasting time=4 h, 40% concentration of sulfuric acid and leaching time=6 h.     

毕节煤矿区晚二叠世煤层稀土元素的物质来源

对取自毕节地区晚二叠世11个可采煤层的13个样品的稀土元素(REE)的物质来源进行分析。发现:海洋来源对稀土元素的富集作用极其微弱;来自植物成因的物质来源小于1%;煤样中δEu负异常,而陆源岩具有Eu负异常的特点。结合晚二叠世多期喷发的峨眉山玄武岩,因此认为稀土元素的物质来源主要受陆源影响和控制。     

煤的变质程度对焦炭结构构造的影响

从宏观和微观两方面对不同变质程度煤所形成焦炭的结构、构造进行了深入研究。从气煤到肥煤阶段（Ｒｏ，ｍ：０．７７％～１．１６％），焦炭气孔壁厚度逐渐增大；进入焦煤阶段（Ｒｏ，ｍ＞１．１６％），焦炭气孔壁厚度降低。气煤、１３焦煤形成的焦炭结构以各向同性体为主，焦煤、肥煤炼出的焦炭以粒状镶嵌结构为主。由气煤和高变质程度的焦煤形成的焦炭，其气孔以微孔和大孔为主，气孔分布标准差Ｄｓ最大；肥煤炼出的焦炭，其气孔分布大小较均一；１３焦煤和低变质程度的焦煤成焦后，气孔分布状况介于上述二者之间