PVC-U塑料管在浅层地热能地下水资源开发工程中应用与研究

PVC-U塑料管具有耐腐蚀、不结垢、质量轻、使用寿命长等特点。将其应用于浅层地热能开发和供水管井工程中,不但可以解决金属井管腐蚀破裂、结垢和水源热泵回灌难等问题,而且还减少了水井维修费用、延长其使用寿命。结合河南郑州实施的437、400 m两眼浅层地热能开发和供水管井示范工程实践,详细论述了PVC-U塑料管成井工艺、存在问题及解决方法的研究成果。     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

Field measurements and monitoring of wastewater discharge in sea water

This paper reports a study of the field measurements and monitoring of wastewater discharge in sea water at Bari East (Italy). A wastewater sea outfall system is an integral and fundamental part of each wastewater treatment with ultimate sink in the sea water. The design of a water treatment plant and wastewater outfall must take into account the use of the environmental water, the values of physicochemical parameters to be respected in order to safeguard the use itself and the quality of the environmental water where wastewater is issued. In the present study measurements of sea current velocity components were carried out with a VM-ADP (Vessel-Mounted Acoustic Doppler Profiler). Salinity, wind directions and velocities were assessed with, for one survey, the total faecal coliforms and other biochemical parameters. It was emphasized that the measurements necessary for monitoring cannot be concentrated in the wastewater outfall pipe zone only, but should be extended to a neighbouring area of the outfall pipe, with an extension depending on the wastewater discharge, the polluting charge and the magnitude of the sea currents and the winds typical of the zone of interest. The analyses presented in this paper confirm that the sea zones close to the wastewater outfall pipe are particularly sensitive and vulnerable. Such results must be considered in the planning of a wastewater outfall pipe.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

煤炭采空区处理的新方法与实例分析

位于乌鲁木齐市南湖路以西的煤炭采空区面积达67 100.5m^2,区内构造从南到北主要由八道湾向斜和七道湾背斜组成,地层产状变化不大。该矿区开采较深,且采空区塌陷区有明显的地下水活动迹象。在对深孔大体积采空区注浆时,比较各种常见注浆治理方法,均存在不同的制约因素,故决定采用灌浆爆破压密法对采空区进行压实加固。经现场爆破试验,该区重复爆破次数在3～5次左右。灌浆爆破压密处理后,对不同土层进行取样对比分析,得到其相应密度（增加）及空隙比（减少）的变化分别为：杂填土14.1%,-7.9%;素填土5.9%,-3.3%;塌落煤层7.8%,-7.7%。根据压缩数据及现场测量,处理后的土体沉降2～4m,部分空体地段的沉降量达10～20m,治理效果明显。     

焦煤集团九里山矿14101工作面突水治理浅析

通过对焦煤集团九里山矿14101工作面底板突水经过的研究,认为工作面底板突水的水源是是Lg灰岩水,其直接补给水源为L2灰岩水,间接补给水源为O2灰岩水;导水通道为底板采动裂隙带。采取了在工作面打水闸墙,利用钻孔对采空区灌注骨料,增加水流阻力,切断导水通道,封堵水源,加固隔水层的地面注浆和井下工程相结合的综合治水方案。通过观察,工作面中间巷无水流出,突水前后水位变化明显,在较短时间内获得了堵水成功。取得了显著的经济效益和社会效益,为矿井突水治理积累了经验。     

广州航空邮件处理中心土洞及桩端软土层处理工艺研究

广州航空邮件处理中心位于岩溶发育地区,场区内存在大量土洞、溶洞等不良地质现象。该建筑物拟采用静压桩基础。为保证建筑物及场道安全,须对场区土洞进行处理。结合场地具体情况和施工工期要求,首先对大体积土洞进行泵注细石砼骨料充填处理,以消除地面大面积塌陷的危险,消灭压桩机械施工安全隐患,然后开始进行静压桩基础施工,同时在场地允许区域对中小体积土洞、桩端软土层等分别进行泵注砂浆骨料和袖阀注浆处理．以确保洞体密实和保证桩基承载力。通过对处理工艺、处理范围的比较筛选和对质量控制要点、施工技术要点的分析提炼．达到了施工简便、造价合理、安全高效的目的,并采用骨料取芯检测、土体标贯试验和压缩试验、洞体物探等多种检测手段,完全达到了设计要求,取得了良好的工程效果和经济效益。     

均匀设计在室内大型注浆试验研究中的应用

介绍了均匀设计试验方法的特点及优越性，利用试验点在试验范围内的均匀分布，能大大减少试验次数且获得较好的试验效果。将均匀设计方法引入到注浆试验研究中，并对试验进行了详细设计，实践表明，均匀设计试验法是一种有效、可靠的试验设计方法。     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.