航空物探平剖图自动绘制的可视化处理

简要介绍了航空物探平面剖面图的自动绘制方法,给出了绘制中对一些问题的处理方法;重点介绍了彩色渐变填充着色、彩色渐变渲染着色等几种可视化处理方法,并提出了着色中渐变度、透明度概念及应用方法。     

大厂矿区坑道磁测找矿试验

大厂矿区一条长1．5km的运输巷道内进行了高精度磁测找矿试验，并进行了地质钻探验证。结果表明：在将局部磁性干扰压抑后，所获相对磁异常是可以取得找矿效果的。     

鄂尔多斯盆地中生代晚期以来大地热流的变化及其对生态环境格局和演变的影响

鄂尔多斯盆地的西北部、东北部和南部三个区域现今大地热流平均值分别为56．3、67．3和65．3mW／m^2，对应的生态环境格局也有明显的差异。研究表明，大地热流每增加4～5mW／m^2可使年均地表温度升高约l℃，使最低月均地表温度升高2。C以上。鄂尔多斯盆地东北部的平均大地热流比西北部高出11mW／m^2，东北部年均地表温度可能比西北部高出2～3℃，其最低月均地表温度可能比西北部高出4～6℃。西北部的大地热流平均值已经低于维持地表生态系统延续所需大地热流的临界值(57mW／m^2)，其自然生态系统整体上已经处于脆弱境地；东北部和南部的大地热流均大于57mW／m^2，自然生态系统均尚较稳健。东北部的沙漠化可能是风沙侵入的结果，其生态应该是可以恢复的。整个西北部作为一个整体看，72万年以前大地热流就已衰减到临界值以下，区域生态系统渐趋脆弱，开始整体上向荒漠化演变。     

An attenuation relationship based on Turkish strong motion data and iso-acceleration map of Turkey

This paper presents an attenuation relationship of peak ground acceleration (PGA) derived from Turkish strong motion data for rock, soil and soft soil sites and an iso-acceleration map of Turkey based on this relationship. For the purpose, among all the three-component accessible records, 221 records from 122 earthquakes that occurred in Turkey between 1976 and November 2003 were selected. The database was compiled for earthquakes with moment magnitudes (M_w) and PGA values ranging between 4.1 and 7.5, and 20 and 806 gal, and distances to epicenter considered in the database were between 5 and 100 km. From the regression analysis of the data, an attenuation equation of PGA considering rock, soil and soft soil conditions was developed. The PGA values predicted from the equation suggested in this study and those both from a few domestic equations and some imported equations were compared. In addition, an iso-acceleration map of Turkey was constructed using the suggested attenuation equation and considering both known active faults and epicenter locations of the earthquakes that have occurred in Turkey.     

高坪-吉心段公路喀斯特工程地质综合勘察

以沪蓉国道主干线湖北省高坪-吉心段的喀斯特地质勘察工作为例，探讨喀斯特地区公路工程地质综合勘察的基本方法。在喀斯特地区运用遥感和地理信息技术技术、地质测绘、综合物探以及地质钻探等勘察手段，通过综合分析各种勘探成果，能够较准确地查明可溶岩的分布、喀斯特形态类型、分布规律、控制因素以及喀斯特水的赋存、分布和运移规律等，并根据不同的喀斯特地貌提出了有针对性的处理对策。通过不断的实践和经验总结。针对喀斯特工程地质问题合理运用综合工程勘察方法，能做出科学的分析评价，可以适应喀斯特区公路建设的需要，并且供今后在喀斯特地区修建公路时参考和借鉴。     

让“测量工具箱”帮助您

从工作实际出发,将测量过程中常用的计算和换算工作,用VisualBasic语言编写成计算程序,最后将各模块集成为一个“测量工具箱”,从而方便了测量工作者处理日常工作中的一些计算和换算问题。     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Submillimeter-wave and observations of the event on 28 November, 2001

We present a detailed study of a 1B/M6.9 impulsive flare combining high time resolution (1 ms) and instantaneous emission source localization observations at submillimeter frequencies (212 GHz), obtained with the solar submillimeter telescope (SST), and Hα data from the Hα solar telescope for argentina (HASTA). The flare, starting at 16:34 UT, occurred in active region (AR) 9715 (NOAA number) on November 28, 2001, and was followed by an Hα surge. We complement our data with magnetograms from the Michelson Doppler Imager (SOHO/MDI). SST observed a short impulsive burst at 212 GHz, presenting a weak bulk emission (of about 90 sfu) composed of a few shorter duration structures. The integrated Hα and the 212 GHz light curves present a remarkable agreement during the impulsive phase of the event. The delay between both curves stays below 12 s (the time resolution of the Hα telescope). The flare as well as the surge are linked to new flux emergence very close to the main AR bipole. Taking into account the AR magnetic field evolution, we infer that magnetic field reconnection, occurring at low coronal levels, could have been at the origin of the flare; while in the case of surge this would happen at the chromospheric level.     

The effective number of cycles of earthquake ground motion

The seismic response of any system that accumulates damage under cyclic loading is dependent not only on the maximum amplitude of the motion but also its duration. This is explicitly recognized in methods for estimating the liquefaction potential of soil deposits. Many researchers have proposed that the effective number of cycles of the ground motion is a more robust indicator of the destructive capacity of the shaking than the duration. However, as is the case with strong‐motion duration, there is no universally accepted approach to determining the effective number of cycles of motion, and the different methods that have been proposed can give widely varying results for a particular accelerogram. Definitions of the effective number of cycles of motion are reviewed, classified and compared. Measurements are found to differ particularly for accelerograms with broad‐banded frequency content, which contain a significant number of non‐zero crossing peaks. The key seismological parameters influencing the number of cycles of motion and associated equations for predicting this quantity for future earthquakes are identified. Correlations between cycle counts and different duration measures are explored and found to be rather poor in the absence of additional parameters. Copyright © 2004 John Wiley & Sons, Ltd.