现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

医院住院部大楼抗震性能评价

以某医院住院部大楼为例进行结构抗震性能评价，首先分析了场址的地震环境，开展了地震危险性分析工作，合成了不同地震危险水平下的地震动加速度时程。进而，通过对结构的模型简化，应用时程分析方法分析结构的抗震性能，得出了一些对其改造加固有意义的结论。     

3-D rheologic model of earthquake preparation (I)—Displacement field

Introduction The rock medium shows mainly elastic character under low-temperature, low-pressure and external force for short duration, yet it shows rheologic property under high-temperature, high-pressure and long-time external force. It is reasonable that the rapid earthquake generating process lasted for tens seconds is analyzed by the elastic theory. As for the earthquake generating process for hundreds or thousand years, nevertheless, the rheologic property of rock must be taken into accou…     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

青藏铁路管道通风试验路基地温变化及热状况分析

基于青藏铁路北麓河试验段管道通风路基在2个冻融循环周期内的地温监测资料，分析了路基温度的发展、温度场分布特征及多年冻土的热流量变化．结果表明：通风管埋设于路堤中部的路基温度变化和发展情况与一般路基类似，路基在施工后的2个冻融周期内仍处于整体升温的过程；通风管埋设于路堤下部的路基，虽然前2个冻融循环周期内土体温度与原始状态相比同样有所升高，但开始出现逐渐降低的趋势，同时地温场的分布在横向上的对称性也比较好，在热交换方面，一般填土路基和通风管位于路堤中部的路基在施工后的前2个冻融循环周期内一直处于吸热过程，而通风管位于路堤下部的路基在经历了第1个周期的持续吸热过程后，在第2个冻融循环周期内已经开始放热。     

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.     

Classification of artificial (man-made) ground

The legacy inherited from anthropogenic processes needs to be addressed in order to provide reliable and up-to-date ground information relevant to development and regeneration in the urban environment. The legacy includes voids as well as anthropogenic deposits (artificial ground). Their characteristics derive from former quarrying and mining activities industrial processes creating derelict ground, variably consolidated made ground, and contaminated groundwater and soils. All need to be systematically assessed to inform the planning process and provide the basis for engineering solutions. Site-specific investigation needs to be conducted on the back of good quality geoscientific data. This comes from ‘field’ survey, remotely sensed data interpretation, historical maps, soil geochemical sampling, and geotechnical investigation. Three-dimensional and, in the future, four dimensional, characterization of superficial deposits is required to reach an understanding of the potential spatial lithological variability of artificial ground and the geometry of important surfaces, i.e. the boundary conditions. The classification scheme for artificial ground outlined in this paper and adopted by the British Geological Survey, will help in achieving this understanding.     

锤击沉管碎石桩处理液化地基的工程实践

结合实际工程,对锤击沉管碎石桩加固处理液化地基的设计、施工控制及处理效果进行了系统论述,对碎石桩设计、施工中遇到的若干问题提出了建议。     

岩体断层基础加固与溶洞灌浆处理中的高压灌浆技术

阐述了在岩体断层加固和溶洞处理中的高压灌浆技术,分析了高压灌浆的作用机理,灌浆压力控制的方法,介绍了高压灌浆在水利枢纽工程上的应用效果。     

岩体边坡工程中的位移监测及分析

边坡工程的监测取决于监测人员对岩(土)体介质的认识程度和选择相应的方法和手段。通过对江西德兴铜矿大山村选矿厂东部边坡和北部楔形地质结构体稳定状况的监测,阐述了在边坡工程中位移监测的应用及有关分析。