Strain partitioning and preservation of Ar/Ar ages during Variscan exhumation of a subducted crust (Malpica–Tui complex, NW Spain)

The Malpica–Tui complex (NW Iberian Massif) consists of a Lower Continental Unit of variably deformed and recrystallized granitoids, metasediments and sparse metabasites, overridden by an upper unit with rocks of oceanic affinities. Metamorphic minerals dated by the ⁴⁰Ar/³⁹Ar method record a coherent temporal history of progressive deformation during Variscan metamorphism and exhumation. The earliest stages of deformation (D1) under high-pressure conditions are recorded in phengitic white micas from eclogite-facies rocks at 365–370 Ma. Following this eclogite-facies peak-metamorphism, the continental slab became attached to the overriding plate at deep-crustal levels at ca. 340–350 Ma (D2). Exhumation was accompanied by pervasive deformation (D3) within the continental slab at ca. 330 Ma and major deformation (D4) in the underlying para-autochthon at 315–325 Ma. Final tectonothermal evolution included late folding, localized shearing and granitic intrusions at 280–310 Ma.

Dating of high-pressure rocks by the ⁴⁰Ar/³⁹Ar method yields ages that are synchronous with published Rb–Sr and Sm–Nd ages obtained for both the Malpica–Tui complex and its correlative, the Champtoceaux complex in the French Armorican Massif. The results indicate that phengitic white mica retains its radiogenic argon despite been subjected to relatively high temperatures (500–600 °C) for a period of 20–30 My corresponding to the time-span from the static, eclogite-facies M1 peak-metamorphism through D1-M2 eclogite-facies deformation to amphibolite-facies D2-M3. Our study provides additional evidence that under certain geological conditions (i.e., strain partitioning, fluid deficiency) argon isotope mobility is limited at high temperatures, and that ⁴⁰Ar/³⁹Ar geochronology can be a reliable method for dating high pressure metamorphism.     

Metamorphic petrology and zircon geochronology of high-grade rocks from the central Mozambique Belt of Tanzania: crustal recycling of Archean and Palaeoproterozoic material during the Pan-African orogeny

New data on the metamorphic petrology and zircon geochronology of high‐grade rocks in the central Mozambique Belt (MB) of Tanzania show that this part of the orogen consists of Archean and Palaeoproterozoic material that was structurally reworked during the Pan‐African event. The metamorphic rocks are characterized by a clockwise P–T path, followed by strong decompression, and the time of peak granulite facies metamorphism is similar to other granulite terranes in Tanzania. The predominant rock types are mafic to intermediate granulites, migmatites, granitoid orthogneisses and kyanite/sillimanite‐bearing metapelites. The meta‐granitoid rocks are of calc‐alkaline composition, range in age from late Archean to Neoproterozoic, and their protoliths were probably derived from magmatic arcs during collisional processes. Mafic to intermediate granulites consist of the mineral assemblage garnet–clinopyroxene–plagioclase–quartz–biotite–amphibole ± K‐feldspar ± orthopyroxene ± oxides. Metapelites are composed of garnet‐biotite‐plagioclase ± K‐feldspar ± kyanite/sillimanite ± oxides. Estimated values for peak granulite facies metamorphism are 12–13 kbar and 750–800 °C. Pressures of 5–8 kbar and temperatures of 550–700 °C characterize subsequent retrogression to amphibolite facies conditions. Evidence for a clockwise P–T path is provided by late growth of sillimanite after kyanite in metapelites. Zircon ages indicate that most of the central part of the MB in Tanzania consists of reworked ancient crust as shown by Archean (c. 2970–2500 Ma) and Palaeoproterozoic (c. 2124–1837 Ma) protolith ages. Metamorphic zircon from metapelites and granitoid orthogneisses yielded ages of c. 640 Ma which are considered to date peak regional granulite facies metamorphism during the Pan‐African orogenic event. However, the available zircon ages for the entire MB in East Africa and Madagascar also document that peak metamorphic conditions were reached at different times in different places. Large parts of the MB in central Tanzania consist of Archean and Palaeoproterozoic material that was reworked during the Pan‐African event and that may have been part of the Tanzania Craton and Usagaran domain farther to the west.     

Neoarchaean magmatism and metamorphism of the western granulites in the central domain of the Mozambique belt, Tanzania: U–Pb shrimp geochronology and PT estimates

U–Pb sensitive high resolution ion microprobe (SHRIMP) dating of zircons from charnockitic and garnet–biotite gneisses from the central portion of the Mozambique belt, central Tanzania indicate that the protolith granitoids were emplaced in a late Archaean, ca. 2.7 Ga, magmatic event. These ages are similar to other U–Pb and Pb–Pb ages obtained for other gneisses in this part of the belt. Zircon xenocrysts dated between 2.8 and 3.0 Ga indicate the presence of an older basement. Major and trace element geochemistry of these high-grade gneisses suggests that the granitoid protoliths may have formed in an active continental margin environment. Metamorphic zircon rims and multifaceted metamorphic zircons are dated at ca. 2.6 Ga indicating that these rocks were metamorphosed some 50–100 my after their emplacement. Pressure and temperature estimates on the charnockitic and garnet–biotite gneisses were obscured by post-peak metamorphic compositional homogenisation; however, these estimates combined with mineral textures suggest that these rocks underwent isobaric cooling to 800–850 °C at 12–14 kbar. It is considered likely that the granulite facies mineral assemblage developed during the ca. 2.6 Ga event, but it must be considered that it might instead represent a pervasive Neoproterozoic, Pan African, granulite facies overprint, similar to the ubiquitous eastern granulites further to the east.     

Orbitolinidae and Alveolinidae (Foraminiferida) from the uppermost Albian-lower Cenomanian of Monti d'Ocre (Abruzzi, Italy)

A biostratigraphic study carried out in the Monti d'Ocre area, Abruzzi, Central Apennines, allowed us to recognize Orbitolina (Conicorbitolina) moulladei ‘Strata 5 (1985) 1’, Praealveolina iberica Reichel and Praealveolina simplex Reichel in uppermost Albian–lower Cenomanian shelf-edge deposits of the Fossato Machè succession. These foraminifers have now been found for the first time in the Apennines of central Italy; their finding is quite important from a palaeobiogeographic viewpoint, as it contributes to the improvement of our knowledge on facies distribution in the circum-Mediterranean regions during the Cretaceous Period. In the study area, the coeval Monte Rotondo and Monte Orsello sections also crop out; these are characterized by bauxite deposits and stratigraphic gaps reflecting episodes of emergence on the carbonate platform. The Monte Rotondo and Monte Orsello sections accumulated in a platform back-reef environment; consequently, in this sector of the Monti d'Ocre area, the depositional environment shifted from a back-reef westward and southward to a shelf-edge northward, during the latest Albian–early Cenomanian. Owing to synsedimentary tectonics, the area investigated underwent differential subsidence: westward and southward, wide areas were uplifted and subjected to emergence, karstification and bauxite accumulation, whereas sedimentation continued in a shelf-edge environment in the north-eastern area.     

Petrographic of Northwestern Sudan

The sedimentology of the Northwestern Sudan consists of lower, middle and upper cycles. The lower and upper cycles are composed of intercalated fluvial and shallow marine facies, whereas the middle cycle consists entirely of fluvial and glaciofluvial facies. The petrographic analysis shows that the lower and upper cydes consist of quartz and lithic arenite sandstones, whereas the middle cycle consists of arkosic and lithic arenite sandstones. The lower and upper cycle sandstones reflect derivation mainly from recycled orogens with minor contribution from craton interior provenances. However, the middle cycle sandstones indicate derivation from basement uplift, transitional and mainly recycled orogens provenances.     

黑龙江省未来30、50年气候预测

通过CCCma、CCSR、CSIRO、Gfdl和Hadley气候模式对黑龙江省其中包括齐齐哈尔、佳木斯、哈尔滨、牡丹江等4区未来50年(2005～2050年)，在GG、GS情景下数值模拟。结果表明(采用GS结果)，未来2030、2050年气温均有较大增高。其中2030年年平均气温可增高1．94℃；春季提高2．06℃：；夏季提高1．29℃；秋季提高1．79℃；冬季提高2．66℃，2050年又继续增加．年平均气温将提高2．42℃；春季提高2．13℃；夏季提高1．68℃；秋季提高2．56℃；冬季提高3．21℃。冬季是四季中增幅最大的季节，其次秋季、春季和夏季。如果按GG情景下，未来气温还要高出1℃。增温中心在西部齐齐哈尔，增温较小为牡丹江。从哈尔滨年蒸发量来看，2030年可增加11％，2050年可增加13％。     

酒店气象专用电视频道技术方案

阐述了酒店气象专用电视频道的工作原理,同时还推荐了本系统软硬件具体的配置,最后对专用系统软件的工作流程及其使用方法进行了详细的说明。     

黄海、东海海域出海气旋发展过程中尺度数值模拟

利用MM5中尺度模式对1999年6月两个出海气旋发展过程进行 数值模拟. 数值模拟的气旋出海后移动路径与实际情况基本一致. 在数值模拟基础上重点讨 论了出海气旋发展过程潜热通量和感热通量的分布及其演变情况. 气旋出海后在气旋中心区 南方和东方存在负潜热通量和感热通量区. 出海气旋的东移和发展，其前方强大正热通量区 的存在可能是重要原因之一.     

利用数字图像处理技术提高地震剖面图像信噪比

提出了利用数字图像处理技术提高地震剖面信噪比的新方法，首先根据数字图像处理要求的格式，对地震剖面数据进行转换，得到地震剖面图像，分析了地震数据特点和初步地震图像的实验结果后，设计了新的预处理方法——“二维沿层滤波”，在此基础上，利用可以计算帧间运动速度及其变化都较大的改进的光流分析技术，计算出多幅地震剖面对应点的偏移量，然后应用图像积累技术对这多幅地震剖面进行积累，实现对三维地震数据体提高信噪比的处理，该方法充分利用了三维地震信息，不但可以提高整个数据体的信噪比，而且可以减少信号能量的损失，并保持原来的信号能量关系，使地震剖面的质量得到明显提高，为地震解释奠定良好的基础。     

采用基础摩擦隔震房屋高宽比限值的研究

大量的试验结果和地震经验表明，采用基础隔震方法能有效地提高建筑物的抗震能力，但建筑物的高度在什么范围，即建筑物的高宽比在什么范围内才适合采用这种方法，仍然是一个有待解决的课题。本文对采用基础滑移隔震多层砌体房屋在实际地震作用下的抗倾覆高宽比限值进行了研究，利用Ｗｉｌｓｏｎ－θ数值积分方法计算，得到了多层砌体房屋的高宽比限值的统计值。其数值结果可供编制建筑隔震设计规程参考。