Marine tether dynamics: retrieval and deployment from a heaving platform

A tether management system of a winch module in a marine environment is proposed. For the purpose of this study the subsea body is considered as a mass attached at the free end of a long tether which is wrapped around a circular drum controlled by an external torque. The winch is considered mounted on a heaving platform. The effect of the heaving platform on the motions of the drum, tether and attached mass are studied with respect to the longitudinal vibrations of the tether in one dimension. The hydrodynamic effects are considered on the deployed portion of the tether and the tethered mass, both of which are assumed submerged in otherwise still water. The resulting nonlinear system of equations of motion is developed and solved numerically for an example of a marine tether system. The effect of the tether extensibility on the operation threshold of the system is identified. Comparison with an inextensible tether case is provided. The numerical results and their analysis for the retrieval/deployment of the system are presented.     

琼州海峡铁路轮渡新海湾港区泥沙淤积问题

海南省拟建琼州海峡铁路轮渡。本文通过对海峡南岸新海湾轮渡港址附近自然条件、岸滩演变和输沙特征的分析研究，对不同类型港区布置方案港内开挖区和航道的淤积强度、淤积量等进行了计算，并对不同防护建筑物的有效拦沙时间等进行了探讨和计算，提出了港区类型推荐方案。     

开发胶东温泉地热水对环境的影响

根据地热水中阴离子的组分与温泉水类型，指出其中Ⅱ＿１、Ⅱ＿２：型水温高，日采水量大，矿化度高，水质复杂，相应的环境效应明显．提出地热水的大规模开采以及尾水的大量排放，对温泉周边的生态环境、工程环境、土壤及地下水等方面有明显的影响．     

辽东湾S2冰侧限剪切强度的试验研究

利用试验方法系统地研究了辽东湾S2型海冰侧限剪切强度随剪切应变速率、加载方向、法向应力、温度和冰内孔隙率的变化规律。介绍了S2型海冰各向异性特点及剪切应变速率对剪切破坏方式的效应和韧脆破坏转变的条件。分析了不同加载方向海冰峰值剪切强度的差异 ,获得 - 6 2℃温度下S2冰内摩擦角和内聚力分别为 42°和 70 0kPa。利用统计分析给出峰值剪切强度与冰温和孔隙率的试验关系     

阻碍江苏滩涂开发速度的因素浅析

文章描述了江苏沿海滩涂开发存在的问题，分析归纳出影响滩涂开发速度的几个重要因素：领导重视不够；开发管理体制混乱；资金投入严重不足；科技投入减少，等等。并提出加速滩涂开发的几条措施，以企有所裨益。     

前苏联七十年海冰研究回顾

本文简要介绍了前苏联近七十年来海冰研究的主要成果及其采用的一些预报方法。     

Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.