全站仪交汇法在高速公路路面沉降监测中的应用

文章介绍了全站仪交会法沉降监测,方便简洁地解决了测量人员不能进入的高速公路等特殊位置的测量问题,并通过对该方法的精度分析,论证了其可行性和有效性,对以后类似的测量工作提供经验和依据。     

改进的自适应遗传算法在遥感图像分割中的应用

为了自动确定遥感图像分割的最佳阈值,本文提出了一种改进的自适应遗传算法,并利用该算法对二维Otsu图像阈值分割函数进行了全局优化,提高了分割闻值的求解速度。该算法能够根据个体适应度大小和群体的分散程度自动调整遗传控制参数,从而能够在保持群体多样性的同时加快收敛速度,克服基本遗传算法的收敛性差、易早熟问题。实验结果表明,该算法具有良好的收敛速度和稳定性,达到较好的图像分割效果,大大缩短了计算时间。     

制图综合中移位算法概述分析

本文首先对移位算法的发展史进行简要介绍,然后,在其基础上,根据各移位算法的思想特征,对各移位算法进行归纳,将其划分为七类,并对每一类算法的核心思想进行详细论述,最后,对各类移位算法进行评价,分析其优缺点,总结各类算法中的可借鉴思想,为更好地实现移位奠定基础。     

随机Dirichlet问题解的调和展开

针对重力学随机Dirichlet问题,通过适当地对边界检验函数的分解,并在随机边界样本空间中提取确定性部分的对偶基,本文将随机Dirichlet问题的一般解展开为一随机系数的调和级数形式。     

造山带异源浆混花岗岩理论与方法研究

1：5万花岗岩填图方法在区调工作中推广以来,在造山带花岗岩调查实践中,由于造山作用及过程的复杂性,花岗岩浆的多源及多样性,使同源岩浆演化理论及方法遇到了难题。文章在新一轮1：25万造山带试点图幅,在对同源岩浆演化理论及方法的适用性进行探索的同时,提出了异源浆混理论指导造山带内部浆混花岗岩（H型花岗岩）的填图方法。并就异源浆混花岗岩鉴别标志等作了系统总结,提出了浆混组合、浆混单元、浆混体,填图的理论方法体系;给予了浆混花岗岩明确的定义。     

TM影像几何校正算法的精度比较

同大多数的线阵推扫式影像相比,TM影像作为双向扫描型的影像其几何校正方法有其特殊性和复杂性。针对这个问题,本文简要介绍了一般多项式、空间斜墨卡托投影、有理函数模型等几种几何近似校正算法,并利用广州地区的TM影像进行了各种试验分析和精度比较。结果表明:同其他方法相比,空间斜墨卡托投影是一种较好的算法,校正精度最高,能够达到一个像素左右,而且该方法不受地形起伏的影响,无需地面高程信息。     

评价生物气生成量、生成期的元素平衡法及其应用

生物气的生成期对其成藏有至关重要的制约作用,但目前国内外尚缺少可信、有效方法来对此进行评价。针对这一难题,考虑到无论生物气的生成机理如何,都是一个有机元素之间的物质平衡过程,文章探索并建立了评价生物气生成量的元素平衡法,并利用松辽盆地大量的实际分析数据,对这一评价方法(模型)进行了标定和应用。结果表明,松辽盆地生物气的生成可能主要发生在800m以浅的埋深条件下;区内源岩生物气的生成量约为285.0×1012m3;生物气的主要生成期在嫩江组沉积末期之前。     

Numerical simulation of migration–accumulation of oil resources

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value to the evaluation of oil resources and to the determination of the location and amount of oil deposits. This thesis discusses the characteristics of petroleum geology and permeation fluid mechanics. For the three-dimensional problems of Dongying hollow of Shengli Petroleum Oil Field, it puts forward a new model and a kind of modified method of upwind finite difference fractional steps implicit interactive scheme. For the famous hydraulic experiment of secondary migration–accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow, the numerical simulation test and the actual conditions are basically coincident. Thus, the well-known problem has been solved.     

A continuous/discontinuous Galerkin framework for modeling coupled subsurface and surface water flow

We consider conjunctive surface-subsurface flow modeling, where surface water flow is described by the shallow water equations and ground water flow by Richards’ equation for the vadose zone. Coupling between the models is based on the continuity of flux and water pressure. Numerical approximation of the coupled model using the framework of discontinuous Galerkin (DG) methods is formulated. In the subsurface, the local discontinuous Galerkin (LDG) method is used to approximate ground water velocity and hydraulic head; a DG method is also used to approximate surface water velocity and elevation. This approach allows for a weak coupling of the models and the use of different approximating spaces and/or meshes within each regime. A simplified LDG method based on continuous approximations to water head is also described. Numerical results that investigate physical and numerical aspects of surface–subsurface flow modeling are presented. This work was supported by National Science Foundation grant DMS-0411413.     

电容测试法判断测井电缆系统故障

测井电缆因长途颠簸、拉伸及绞车缠绕挤压,电缆连接器、电缆、绞车滑环、滑环连线等部位极易出现故障。电容测试法是一种简易、快速的检测方法,该法可在现场准确诊断出故障电缆的位置。以四芯铠装电缆为例,每根缆芯的正常阻值约为80Ω/1 000m,两缆芯间的分布电容约为170PPF/1 000m。在实际检测中,根据电容较小时测点的位置,可以有效判断故障部位;而电缆故障位置则可利用电阻及电容的线性关系进行计算予以确定。