Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.     

Kübler Index and K-Ar Ages of Illite in the Yinshan Polymetallic Deposit, Jiangxi Province, South China: Analyses and Implications

Abstract. The Yinshan polymetallic deposit is a hydrothermal vein-type deposit closely related to Late Jurassic felsic-inter-mediate volcanic-subvolcanic activity in Jiangxi Province, South China. Illite is a major alteration mineral observed in the deposit. Our study shows that the Kübler index of the illite has a close relation to ore-forming fluids of different stages of hydrothermal alteration and mineralization. The early Pb-Zn-Ag mineralization dated at 130–136 Ma is characterized by relatively low water/rock ratios and diffusive fluid movement within phyllite, whereas the later Cu-Au-S mineralization at 122 -125 Ma was accompanied by higher water/rock ratios and localized fluid flow through fractures and channels. Illite formed in the early Pb-Zn-Ag mineralization stage contains swelling layers while the illite formed in the later Cu-Au-S mineralization stage has no swelling layers but was associated with intensive chloritization. The last stage of mineralization (at 104 Ma) was minor and did not produce significant amounts of illite.     

Chemistry and Sulfur Isotopes in a Chert-dominant Sequence around the Stratiform Manganese Deposit of the Noda-Tamagawa Mine, Northern Kitakami Terrane, Northeast Japan: Implication for Paleoceanographic Environmental Setting

Abstract. Chemistry and sulfur isotopes are analyzed for a series of rocks in the chert‐dominant sequence around the stratiform manganese ore deposit of the Noda‐Tamagawa mine in the northern Kitakami Terrane, northeast Japan. The sequence is litholog‐ically classified into six units in ascending order: lower bedded chert, lower black shale, massive chert, manganese ore, upper black shale, and upper bedded chert. The rocks around the manganese ore deposit exhibit anomalous enrichment in Ni (max. 337 ppm), Zn (102) and U (30) in the upper part of lower bedded chert, Mo (122), Tl (79) and Pb (33) in the lower black shale, MnO, Cu (786) and Co (62) in the manganese ore, and As (247) and Sb (17) in the upper black shale. The aluminum‐normalized profiles reveal zonal enrichment of redox‐sensitive elements around the manganese bed: Zn‐Ni‐Fe‐Mo‐U(‐Co), Tl‐Pb(‐Mo), Mn‐Fe‐Cu‐V‐Cr‐Co(‐Zn) and As‐Sb in ascending order. The uppermost part of the lower bedded chert and black shale exhibit negative Ce/Ce* values, whereas the massive chert, manganese ore and lower part of the upper bedded chert display positive values. The isotopic δ³⁴S values are 0±6 % in the lower part of the lower bedded chert, ‐19 to ‐42 % in the upper part of the lower bedded chert, ‐36 to ‐42 % in the lower black shale, ‐28 to ‐35 % in the massive chert, manganese ore and upper black shale, and ‐23±5 % in the upper bedded chert. Thus, there is a marked negative shift in δ³⁴S values in the lower bedded chert, and an upward‐increasing trend in δ³⁴S through the manganese ore horizon. The present data provide evidence for a change in the paleoceanographic environmental resulting from inflow of oxic deepwater into the stagnant anoxic ocean floor below the manganese ore horizon. This event is likely to have triggered the precipitation of manganese oxyhydroxides. The redistribution of redox‐sensitive elements through the formation of metalliferous black shale and manganese carbonate ore may have occurred in association with bacterial decomposition of organic matter during early diagenesis of initial manganese oxyhydroxides.     

Chemical Profiles across a Jurassic Stratiform Manganese Deposit at Katsuyama in the Mino Terrane of Central Japan: Implications for Depositional Environment, Diagenetic Metal Redistribution and Paleoceanography

Abstract. Inorganic chemical compositions are determined for a series of rocks crossing an Early Jurassic stratiform manganese ore deposit in a chert‐dominant sequence at Katsuyama, in the Mino Terrane of central Japan. The lithology in the vicinity of the manganese ore bed is classified into lower bedded chert, black shale, massive chert, manganese ore and upper bedded chert, in ascending order. The rocks surrounding the manganese deposit are anomalously high in certain elements: Pb (max. 29 ppm), Ni (1140) and Co (336) in the lower bedded chert, Mo (438), As (149), Tl (29) and U (12) in the black shales, V (210) and Cr (87) in the massive chert, and MnO and W (24) in the manganese ore. The aluminum‐normalized profiles reveal a distinct zonation of redox‐sensitive elements: Pb‐Zn, Ni‐Co‐Cu(‐Zn) and U‐Cr in the lower bedded chert, Mo‐As‐Tl in the black shale, V(‐Cr) in the massive chert, and Mn‐Fe‐Ba‐W in the manganese ore, in ascending order. The lower and upper bedded cherts and manganese ore generally exhibit flat rare earth element patterns with positive Ce anomalies, whereas the uppermost part of the lower bedded chert, the black shale and massive chert have flat patterns with weak or nonexistent negative Ce anomalies and weak positive Eu anomalies. The strong enrichment in Ni, Co, W, Tl and As detected in the Katsuyama section is not recognized in other sediments, including those of anoxic deposition origin, but is identified in modern ferromanganese nodules, suggesting that metal enrichment in the Katsuyama section is essentially due to the formation of ferromanganese nodules rather than to deposition in an anoxic environment. The observed elemental zonation is well explained by equilibrium calculations, reflecting early diagenetic formation and associated gradual reduction with depth. The concentration profiles in combination with litho‐ and biostratigraphical features suggest that formation of these bedded manganese deposits was triggered by an influx of warm, saline and oxic water into a stagnant deep ocean floor basin in Panthalassa at the end of the middle Early Jurassic. Paleoceanographic environmental controls thus appear to be important factors in the formation and preservation of this type of stratiform manganese deposit.     

Rare Earth, Major and Trace Elements in the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Rare earth, major and trace element geochemistry is reported for the Kunimiyama stratiform ferromanganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The deposit immediately overlies greenstones of mid-ocean ridge basalt (MORB) origin and underlies red chert. The ferromanganese ores exhibit remarkable enrichments in Fe, Mn, P, V, Co, Ni, Zn, Y and rare earth elements (excepting Ce) relative to continental crustal abundance. These enriched elements/ Fe ratios and Post-Archean Average Australian Shale-normalized REE patterns of the ferromanganese ores are generally analogous to those of modern hydrothermal ferromanganese plume fall-out precipitates deposited on MOR flanks. However in more detail, Mn and Ti enrichments in the ferromanganese ores are more striking than the modern counterpart, suggesting a significant contribution of hydrogenetic component in the Kunimiyama ores. Our results are consistent with the interpretation that the Kunimiyama ores were umber deposits that primarily formed by hydrothermal plume fall-out precipitation in the Panthalassa Ocean during the Early Permian and then accreted onto the proto-Japanese island arc during the Middle Jurassic. The presence of strong negative Ce anomaly in the Kunimiyama ores may indicate that the Early Permian Panthalassa seawater had a more striking negative Ce anomaly due to a more oxidizing oceanic condition than today.     

湖南芙蓉锡矿床中萤石的Sr－Nd同位素研究

芙蓉锡矿床是一个新探明的超大型锡矿床，产于湘南的骑田岭花岗岩体中。本次研究测试了该矿床中与锡石硫化物共生的萤石的Sr和Nd同位素组成。各矿脉中萤石的87Sr/86Sr比值并不相同，变化从0.70770～0.71484，反映了成矿流体的初始87Sr/86Sr比值并不均一。萤石的Sm－Nd同位素组成并没有构成很好的等时线，计算的ENd（t）值变化在－6.6～－9.8之间。萤石的Sr－Nd同位素组成并不同于花岗岩，成矿流体中的Sr和Nd有很大一部分来自围岩的碳酸盐岩地层。     

Mathematical model for hydraulically aided electrokinetic remediation of aquifer and removal of nonanionic copper

One of the most cost-effective in situ technologies for soil and groundwater (i.e., aquifer) remediation is electrokinetic remediation. In electrokinetic remediation, electromigration due to electric field is combined with hydromigration due to hydraulic flow by purge water to remove pollutants from aquifers through the pore water. This study aims at investigating theoretically the role of electromigration (as active movement) of pollutants and the role of hydromigration (as passive movement) of pollutants in electrokinetic remediation, and making it clear that the control variables for electrokinetic remediation are the applied voltage and the hydraulic flow rate. These aims are pursued by construction of a mathematical model based on physico-chemical considerations and by model simulations of the electrokinetic remediation applied to the virtual aquifer polluted by heavy metals of copper sulfate. According to numerical simulations with the model: (1) heavy metal (nonanionic copper) is removed from the upstream anode region and accumulated in the downstream cathode region; (2) to carry away the heavy metal outside the aquifer (global removal), hydromigration by purge water flow is essential; and (3) electromigration contributes mainly to the redistribution of heavy metals within the aquifer (local removal and local accumulation).     

A size classification for debris flows

A 10-fold classification for debris flow size is proposed based on total volume, peak discharge and area inundated by debris. Size classes can be used for regional overview studies where detailed site investigations are either unnecessary, too costly or where the highest hazard and risk creeks need to be identified for further study. They are also useful to compare the regional impact between affected areas and the effects of rainstorms, and they allow lay-people to obtain an understanding of debris flow magnitude and consequences. Finally, different size classes allow the estimation of travel times to points of interest based on empirically derived equations. It is proposed that agencies concerned with debris flows should establish a documentation of debris flow size according to this classification, which serves as a data base for hazard and risk planning.     

翁泉沟含铀硼铁矿床综合开发利用研究与对策

翁泉沟含铀硼铁矿中硼(B2O3)储量约占我国总储量的一半,矿床经勘探后一直没有很好得到利用。在综合利用资料积累与地质研究基础上,认为影响矿床利用的因素主要为矿石分解状况。研究认为矿床中硼镁铁矿-磁铁矿和硼镁石-磁铁矿两种主要类型矿石中绝大部分为可利用的变质后期热液作用产生的硼镁石-磁铁矿型矿石。这种热液作用形成的矿石是有规律可寻的。为达到综合利用的目的,有必要按不同类型矿石重新圈定矿体,根据不同矿体中硼镁铁矿分解率指标,选择两种不同综合利用方案。