砾钢渣抗液化特性试验研究

陈化的钢渣作为土工回填材料是废弃钢渣循环利用的主要途径之一。按土的工程分类方法,将废弃钢渣划分为砾钢渣、粗钢渣和细钢渣。针对砾钢渣,考虑固结应力比、振动频率、围压和含砾量等影响因素开展动三轴试验研究。分析了砾钢渣的应力、应变和动孔隙水压力的特性,分析了砾钢渣试样的动强度与振动次数、动应变与振动次数、孔隙水压力与振动次数和动应力与动应变关系。采用Seed和Finn提出的饱和砂土动孔压计算模型分析砾钢渣的动孔压曲线类型,并与传统砂砾土的抗液化强度进行比较。得出砾钢渣的抗液化特性较好,工程中可以用砾钢渣替代传统的砂土、砂砾土、砂砾料和砂卵石作为回填料,解决砂砾资源日渐短缺的问题。     

湖南常德南斗姆湖地区早更新世砾石层砾组分析与沉积特征研究

为了查明洞庭盆地西缘早更新世砾石层沉积特征及沉积环境,在1:5万地质调查基础上,对常德南斗姆湖地区几处第四系砾石层剖面进行了较系统的测量与统计。结果表明: 砾石成分主要来源于寒武纪或前寒武纪地层。砾石分选系数S_a 为1.16~1.64,部分测点S_a>1.40,反映砾石形成时水动力很强,部分砾石层为快速堆积。砾石扁度F为2.06~2.32,大于2.0,砾石以扁平状为主。砾石普遍弱—中等风化,部分砾石强风化,反映砾石在沉积搬运过程中存在风化暴露。砾向分析显示古水流主要来源于SWW—NW向,表明砾石层形成时期古地貌与现有地貌有较大差异。剖面对比得出,区内砾石层是在冲洪积扇基础上发育的以辫状河相为主的沉积体。对研究区砾石层沉积相及古地貌的新认识,为区内金刚石原生矿床的找矿工作提供支撑。     

甘肃灵台新近纪红粘土磁组构特征的沉积学意义

对第四纪典型风成马兰黄土、受成壤作用影响较大的第五层古土壤、新近纪红粘土、埋藏化石的红粘土围岩层的磁组构分析表明:新近纪红粘土的磁组构参数P、F值界于马兰黄土—第五层古土壤与经流水改造的化石围岩之间,L均值与风成黄土相当, Q均值接近于水成红粘土化石围岩,而在事件性沉积方面又类似于风成马兰黄土、第五层古土壤;磁组构参数F-L、P-Q组合图位于马兰黄土—第五层古土壤与经流水改造的化石围岩过渡带。反映红粘土沉积物既具有风成原地堆积物的磁组构参数特征,又有经历了后期流水改造的化石围岩的特点,是风成原地堆积与风动力搬运而来的母质颗粒经后期流水改造共同作用的产物。     

河南西峡寨根地区韧性剪切带中斜长角闪岩角闪石组构特征的探讨

本文通过对秦岭造山带核部,河南西峡寨根地区角闪岩中角闪石组构及其与韧性剪切带关系的研究,得出几点认识:（1）角闪石的优选方位受控于韧性剪切带,随着韧性剪切作用的加强,L构造岩愈趋典型;（2）分析角闪石中光率体轴Ng与结晶C轴的关系,Ng轴偏于一个方向,表明受剪应力所致;（3）通过角闪石C轴与剪切带边界关系的研究,确定剪切带为左旋剪切性质;（4）据角闪石组构及韧性剪切带与其它构造相互关系,恢复秦岭造山带的历史,至少经历了区域动热变质变形阶段、韧性再造阶段和脆性改造阶段。     

Relation of streams, lakes, and wetlands to groundwater flow systems

 Surface-water bodies are integral parts of groundwater flow systems. Groundwater interacts with surface water in nearly all landscapes, ranging from small streams, lakes, and wetlands in headwater areas to major river valleys and seacoasts. Although it generally is assumed that topographically high areas are groundwater recharge areas and topographically low areas are groundwater discharge areas, this is true primarily for regional flow systems. The superposition of local flow systems associated with surface-water bodies on this regional framework results in complex interactions between groundwater and surface water in all landscapes, regardless of regional topographic position. Hydrologic processes associated with the surface-water bodies themselves, such as seasonally high surface-water levels and evaporation and transpiration of groundwater from around the perimeter of surface-water bodies, are a major cause of the complex and seasonally dynamic groundwater flow fields associated with surface water. These processes have been documented at research sites in glacial, dune, coastal, mantled karst, and riverine terrains. Received, April 1998 · Revised, July 1998, August 1998 · Accepted, September 1998     

超前锚杆短循环法在砂砾石隧洞挂口施工中的应用

介绍了在支洞工程的施工中,利用超前锚杆短循环法解决在砂砾石地层中挂口难题的具体措施和关键技术,实现了工程自身及周围围道公路,升压站等重要建筑物的安全技术要求。     

Influence of cohesion on California bearing ratio of clay-gravel mixtures

An understanding of the behavior of cohesive sediment is required to solve various engineering problems such as scour around bridge elements, mitigation of soil erosion, pavement design, river bed degradation,stable channel design. Pavement foundation designers principally use the California bearing ratio(CBR)to describe the subgrade and subbase materials and their strength. Several laboratory experiments were done to study the variation in the CBR of cohesive mixtures comprised of clay-gravel m...     

Morphology of riffle–pool sequences in the River Severn,England

Despite the occurrence of riffle–pool sequences in many rivers there are few data concerning riffle–pool unit morphology. Of many criteria proposed to identify riffle–pool units, only three methods can be regarded as objective and robust. These are the ‘zero‐crossing’, the ‘spectral analysis’ and the ‘control‐point’ methods. In this paper statistics are developed using the first two of these methods to describe the streamwise morphology of 275 riffles and 285 pools which form a continuous 32·1 km reach of the bed of the River Severn in Shropshire, England. Yalin's theoretical relationship between the average riffle:pool unit length ( λ _p) and channel width ( W ), λ _p = 3 W , applies to the River Severn. Reach‐average riffle height ( H ) is a constant proportion of bankfull depth ( h ); typically H ≅ 0·16 h . Riffle height is a positive function of riffle length. Pool depth is a positive function of pool length. However, both riffle length and pool length increase more rapidly than the bed‐level amplitude, such that long riffles or pools are relatively ‘flat’. As channel gradient reduces, bedforms flatten and become more asymmetric as riffle stoss sides and the proximal slope of pools lengthen at the expense of riffle lee sides and pool distal slopes. The statistical relationships between riffle steepness (H/L) and water depth are similar to those for equilibrium subaqueous dunes. The Severn data are consistent with Yalin's theoretical analysis relating riffle bedform length (L _r) to water depth, i.e. L _r = α2π h, wherein α ≅ 1 for steep near‐equilibrium bedforms but α ≅ 2 to 3 as the relative depth decreases and riffles become long, low features. Theoretical consideration and turbulence data indicate that the frequency of coherent turbulent‐flow structures associated with the riffle–pool mixing length in the Severn should be of the order of 50 to 100 s. The morphological similarity of the steepest River Severn riffles with dunes raises intriguing questions with respect to self‐similar, convergent organization of periodic alluvial bedforms and to bedform dynamic classification particularly. Copyright © 2000 John Wiley & Sons, Ltd.     

Visual characterization technique for gravel‐cobble river bed surface sediments; validation and environmental applications Contribution to the programme of CIRSA (Centre Interuniversitaire de Recherche sur le Saumon Atlantique)

This paper presents an evaluation of the feasibility and the reliability of a visual characterization technique for gravel–cobble river bed surface substrate. Based on principal axis regressions, using phi scale (ϕ), comparisons of visual estimation and grid sampling techniques show that useful predictive relations (R² = 0·78–0·88) exist between visual estimates of the surface d₁₆, d₅₀ and d₈₄ and estimates obtained for the same percentiles with the grid sampling technique. Comparisons of visual estimation and the surface‐bulk sampling technique also indicate a predictive relation (R² = 0·70) between the d₅₀ of the two methods. Trained operators can visually estimate gravel–cobble bed surface d₁₆ to uncertainties of 41 per cent, d₅₀ to 15 per cent and d₈₄ to 11 per cent (for example, there is a 5·5 mm error on a d₈₄ size of 50 mm). Furthermore, evidence shows that if operators are properly trained, a calibration relation for each percentile can be applied independently of operators. This visual characterization allows effective detailed mapping of spatial patterns in substrate size distribution along extensive reaches of gravel‐bed rivers. The technique can be very useful in creating terrain models for various geomorphological, hydrological and biological applications such as the determination of entrainment thresholds, hydraulic roughness and substrate suitability for benthic insects or salmonid habitat. Copyright © 2001 John Wiley & Sons, Ltd.     

提高地浸钻孔出水量的有效技术措施

地浸钻孔是一种以采矿为目的的钻孔,提高钻孔出水量就是提高钻孔的采矿量。通过对多年地浸钻孔施工经验和理论进行分析,发现影响钻孔出水量的主要因素为钻井泥浆的成分和性能以及人工过滤层的渗透性差异,提出在地浸钻孔施工方案中采用植物胶净化泥浆钻进和扩孔、投砾罐射吸式填砾、物理化学组合洗井3种技术措施,对比前后施工钻孔的出水量大小,证明了该技术措施对提高地浸钻孔出水量具有良好的效果。