浙江洪公铝质A型花岗岩类的岩石地球化学及其构造环境

初步研究表明,以往被认为是典型的I型花岗岩质岩石的浙江洪公岩体应为铝质A型花岗岩质岩石。该岩体以高钾为特征,K2O 达5％以上,K2O/ Na2O＞1.2,准铝-过铝质（A/NKC=0.80 ～1.14）;FeO*/MgO比值大（平均14.20）,高于M型、S型和I型花岗岩;富含稀土元素（ΣREE=313.09×10-6～523.73×10-6）,具有较高的Ga/Al（′104）值（2.92～4.29）和（Zr+Nb+Ce+Y）元素组合值（551.5′10－6～987.4′10－6）,而亏损Ba、Sr、P、Ti等;Nd同位素模式年龄为1.3—1.6Ga,反映洪公岩体主要起源于地壳物质的部分熔融。区域背景、构造被动定位特点和地球化学综合分析表明,洪公岩体形成于拉张的构造环境。     

粤北地区产铀岩体的铀矿化特征及其成矿机制探讨

粤北地区是中国花岗岩型铀矿最为重要的大型矿聚集区,其主要的产铀花岗岩体是诸广山岩体和贵东岩体,均为多期多阶段的复式岩体,主要以印支期和燕山期的花岗岩为主。粤北地区的铀矿床主要由诸广山的长江铀矿田、澜河铀矿田、鹿井铀矿田和贵东岩体的下庄铀矿田组成,根据铀的成矿特征可分为硅化带型、交点型和碱交代型。粤北地区的铀成矿流体主要来自于地幔,而不是以往认为的花岗岩浆期后热液,铀源主要是粤北产铀岩体的印支期花岗岩。因此在华南开展新一轮铀矿找矿时,跳出以往“沿带找矿”的老思路,聚焦于印支期岩浆作用与铀矿床的关系,并重点关注华南地区可能的地幔柱或热点区域。     

浙江沐尘石英二长岩体的岩石地球化学特征及构造意义

出露于江山-绍兴断裂带西南段东南侧的沐尘岩体,以发育暗色包体和环斑长石为特征,具有显著的岩浆混合作用.寄主岩为二长岩-石英二长岩组合,包体岩石为二长闪长岩.二长岩组合.造岩矿物有钾长石、斜长石、石英、普通角闪石和黑云母.岩石富碱(Na2O K2O=6.58%～10.42%,平均8.41%)、高钾(K2O/Na2O=0.72～1.45,平均1.16)、贫钛(TiO2=0.37%～1.22%,平均0.76%)、富集大离子亲石元素和轻稀土元素,具有钾玄质系列的岩石地球化学特征.该岩体侵位于后碰撞弧构造环境,是早白垩世早期该区重要的构造.岩浆热事件的产物.     

河北阜平地区太古宙变质深成岩与金矿的关系初探

区内变质深成岩由阜平岩群变质表壳岩经深部重熔作用形成,典型特征是低钾富钠,具有TTG岩石特点.经对变质深成岩成矿元素的研究表明:①Au元素丰度值很高(平均2.10×10-6),远远高于世界中性-中酸性侵入岩及地壳中Au元素的丰度值;②Au元素浓集克拉克值(488.37)远远大于1,呈非常强的富集状态;③Au元素在变质深成岩中的变异系数(0.65)几乎是区内变质表壳岩中Au元素的2倍,有利于Au元素的聚集成矿.故变质深成岩应是成矿物质的主要提供者.     

Trace‐element signatures of apatites in granitoids from the Mt Isa Inlier,northwestern Queensland

The concentrations of trace elements in apatite from granitoid rocks of the Mt Isa Inlier have been investigated using the laser‐ablation inductively coupled plasma‐mass spectrometry (ICP‐MS) microprobe. The results indicate that the distribution of trace elements (especially rare‐earth elements (REE), Sr, Y, Mn and Th) in apatite strongly reflects the chemical characteristics of the parental rock. The variations in the trace‐element concentrations of apatite are correlated with parameters such as the SiO₂ content, oxidation state of iron, total alkalis and the aluminium saturation index (ASI). The relative enrichment of Y, HREE and Mn and the relative depletion of Sr in the apatites studied reflect the degree of fractionation of the host granite. Apatites from strongly oxidised plutons tend to have higher concentrations of LREE relative to MREE. Manganese concentrations are higher in apatite from reduced granitoids because Mn²⁺substitutes directly for Ca²⁺. The La/Ce ratio of apatite is well‐correlated with the whole‐rock K²O and Na²O contents, as well as with the oxidation state and ASI. Because apatite trace‐element composition reflects the chemistry of the whole rock, it can be a useful indicator mineral for the recognition of mineralised granite suites, where particular mineralisation styles are associated with granitoids that have specific geochemical fingerprints.     

陕西金堆城花岗岩类主要造岩矿物特征及其岩石学意义

本文依据大量测试数据,对金堆城地区花岗岩类主要造岩矿物学特征同钼迁移富集成矿关系进行了探讨。研究结果表明:异常晶胞条纹长石和正长石以及富重稀土和具明显负铕异常的黑云母是含钼花岗岩类标型矿物,并且可作为花岗岩类岩石发育地区寻找隐伏钼矿体的指示性矿物。钾钠长石和斜长石的结构状态和成分不仅可以提供有关花岗岩类成因演化的信息,其矿物本身亦可成为钼的载体矿物。岩浆期后,强烈的热液蚀变作用可造成钾钠长石和斜长石分解,并且引起钼的释放,从而形成高品位钼矿石。     

Advective heat transfer and fabric development in a shallow crustal intrusive granite — the case of Proterozoic Vellaturu granite,south India

Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite body emplaced within the greenschist facies Nallamlai rocks.     

Magmatic structures in the Krkonoše–Jizera Plutonic Complex,Bohemian Massif: evidence for localized multiphase flow and small-scale thermal–mechanical instabilities in a granitic magma chamber

The present paper examines magmatic structures in the Jizera and Liberec granites of the Krkonoše–Jizera Plutonic Complex, Bohemian Massif. The magmatic structures are here interpreted to preserve direct field evidence for highly localized magma flow and other processes in crystal-rich mushes, and to capture the evolution of physical processes in an ancient granitic magma chamber. We propose that after chamber-wide mixing and hybridization, as suggested by recent petrological studies, laminar magma flow became highly localized to weaker channel-like domains within the higher-strength crystal framework. Mafic schlieren formed at flow rims, and their formation presumably involved gravitational settling and velocity gradient flow sorting coupled with interstitial melt escape. Local thermal or compositional convection may have resulted in the formation of vertical schlieren tubes and ladder dikes whereas subhorizontal tubes or channels formed during flow driven by lateral gradients in magma pressure. After the cessation or deceleration of channel flow, gravity-driven processes (settling of crystals and enclaves, gravitational differentiation, development of downward dripping instabilities), accompanied by compaction, filter pressing and melt segregation, dominated in the crystal mush within the flow channels. Subsequently, magmatic folds developed in schlieren layers and the magma chamber recorded complex, late magmatic strains at high magma crystallinities. Late-stage magma pulsing into localized submagmatic cracks represents the latest events of magmatic history of the chamber prior to its final crystallization. We emphasize that the most favorable environments for the formation and preservation of magmatic structures, such as those hosted in the Jizera and Liberec granites, are slowly cooling crystal-rich mushes. Therefore, where preserved in plutons, these structures may lend strong support for a “mush model” of magmatic systems.