Effect of temperature on embryonic and larval development of bream (Abramis brama L.)

Influence of water temperature on embryonic and larval development of bream (Abramis brama L.) was stdied. Eggs of bream were incubated at eight constant water temperatures between 13.2 and 26.8°C. The temperature of 21.1°C gave highest hatching success, with no abnormalities in the eleutheroembryos and lowest mortality observed between eyed egg stage and the time of hatching. Developmental rate increased with increasing temperature. Duration of embryonic development (y; hours) decreased with increasing incubation temperature (x; °C) according to the formula: y=910.1−65.88 x+1.318 x². Larvae were reared at eight constant temperatures ranging from 13.5 to 34.0°C. The instantaneous growth rate in wet weight increased with increasing test temperature from 13.5 to 29.9°C, and then decreased at higher temperatures. Individual growth of fish and biomass production rate were highest at 27.9°C. This temperature is considered optimal when food availability and photoperiod are no limiting factors.     

陆源碎屑沉积作用对化学元素配分的制约——兼论五台地区前寒武纪碎屑沉积岩示踪源区陆壳成分的意义

为探讨粒度分选沉积作用对沉积物化学成分配分的影响,对比研究了五台群中石英岩、长石石英岩、粉砂岩和粘土岩等不同粒度沉积岩的化学成分特征,结果表明:不同粒度沉积岩的主元素及微量元素均具有较大的变化范围,SiO_2与Al_2O_3及TFe_2O_3之间呈线性负相关关系,这种负相关关系还表现在SiO_2与REE,Rb,Sr之间,这种特征可以用石英的稀释作用进行解释;铁族元素Cr,Ni,Co和REE,Rb,Sr等大离子亲石元素与Al_2O_3呈正相关关系,表明这些元素易在富铝的粘土岩中聚积。不同粒度成分沉积岩的稀土     

表生风化作用下多年冻土土壤的理论粒径分布

The paper discusses the distinctive features of grain size distribution of permafrost soils formed under conditions of continental lithogenesis and cryogenic weathering of rocks. As a functional consequence of surface erosion of mineral particles, the log-normal distribution of the density function of grain size is derived confirmed for any conditions and sediment types.     

The pelagic community of a gravel pit lake: Significance of Coleps hirtus viridis (Prostomatida) and its role as a scavenger

Coleps hirtus viridis was the dominant species of the planktonic ciliate community of Lake Fühlinger See (Germany) during the study in 1999 and 2000. Total ciliate densities ranged from 120 to 42,000 ind. l⁻¹ in 1999 and up to 8,000 ind. l⁻¹ in 2000. Coleps contributed up to 98% to both total ciliate abundance and biomass and made up an average of 64% of the total ciliate biomass. Oligotrichs (Rimostrombidium, Strobilidium) dominated the epilimnetic zone, whereas peritrich ciliates (Pelagovorticella, Vorticella) were predominantly located in the hypolimnion. The population maximum of Coleps changed locations from the epilimnion in early summer to the hypolimnion (up to 40,000 ind. l⁻¹) during stratification. High growth rates in the hypolimnion, presence of endosymbiontic algae and the ability to ingest detritus seem to be important for the success.Growth rates of Coleps in June were determined by Landry-Hassett dilution experiments in both the epilimnion and the hypolimnion. The instantaneous growth rates were similar in both layers (0.6 d⁻¹), but a distinctly higher instantaneous mortality was estimated for the epilimnion. These high loss rates may be due to grazing pressure by cladocerans.The significance of the histophagous feeding of Coleps was evaluated through an experiment using killed zooplankton. Parts of Daphnia magna were incorporated at rates of about 1,100 μm³ ind.⁻¹ h⁻¹ by Coleps without endosymbiotic algae and at rates of 500 μm³ ind.⁻¹ h⁻¹ by Coleps with endosymbionts. These high feeding rates support the conclusion that Coleps can use dead organic matter as an additional food source.     

A hybrid method for size characterization of coarse subsurface fluvial sediments

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Discovery and analysis of ultra-micro grinding grain texture in slipping lamellae of ductile-brittle zone

In the 1990s of the 20th century, we participated in the research of the stress field in fissure tectonics of scientific deep bore cores for the Deep Observation and Sampling of the Earths Continental Crust (DOSECC for short). Spherical and enriched ul-tra-micro granular textures (nm size), which enriches Nb element (Wang & Sun, 1990; Sun & Wang, 1993)[1,2], were found during the observation of ul-tra-micro slipping lamellae of ductile and brittle oc-curring in Late Mesozoic granites us…     

2003年异常气候对清徐葡萄的影响

气候对葡萄生长发育的影响十分关键，以光照、温度和降水三要素为主。利用清徐地面气象资料，根据葡萄各生育阶段对气候资源的需求特点，比照该时期年内的实际气候状况，着重分析年度内气候异常与葡萄产量下降、品质降低之间的关系，并就如何减缓气候对葡萄生产的不利影响进行初步探讨。     

碎屑流沿坡面运动的初步分析

本文分析了碎屑流沿坡面下滑过程中的运动特性,重点考察了床面摩擦系数、土体内摩擦角和坡角对碎屑流堆积形态的影响.     

Isotope provinces, mechanisms of generation and sources of the continental crust in the Central Asian mobile belt: geological and isotopic evidence

The available geological, geochronological and isotopic data on the felsic magmatic and related rocks from South Siberia, Transbaikalia and Mongolia are summarized to improve our understanding of the mechanisms and processes of the Phanerozoic crustal growth in the Central Asian mobile belt (CAMB). The following isotope provinces have been recognised: ‘Precambrian’ (T_DM=3.3–2.9 and 2.5–0.9 Ga) at the microcontinental blocks, ‘Caledonian’ (T_DM=1.1–0.55 Ga), ‘Hercynian’ (T_DM=0.8–0.5 Ma) and ‘Indosinian’ (T_DM=0.3 Ga) that coincide with coeval tectonic zones and formed at 570–475, 420–320 and 310–220 Ma. Continental crust of the microcontinents is underlain by, or intermixed with, ‘juvenile’ crust as evidenced by its isotopic heterogeneity. The continental crust of the Caledonian, Hercynian and Indosinian provinces is isotopically homogeneous and was produced from respective juvenile sources with addition of old crustal material in the island arcs or active continental margin environments. The crustal growth in the CAMB had episodic character and important crust-forming events took place in the Phanerozoic. Formation of the CAMB was connected with break up of the Rodinia supercontinent in consequence of creation of the South-Pacific hot superplume. Intraplate magmatism preceding and accompanying permanently other magmatic activity in the CAMB was caused by influence of the long-term South-Pacific plume or the Asian plume damping since the Devonian.     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.