Optimisation de la quantification des flux de matière en suspension d'un cours d'eau alpin : l'Isère à Grenoble (France)

This study seeks to determine suspended-matter flux of the Isère at Grenoble, one of the most important rivers of the northern French Alps. Since 1994, and especially 1996, systematic samplings of the left bank make it possible to follow in one point the variations of suspended particles and matter (SPM) of this river. But from a single measurement, sometimes not very representative of the whole observable concentrations within the section, it remains still difficult to estimate precisely the SPM flux. The results of this study show in particular the successive appearance of several turbidity gradients, whose occurrence is explained mainly by the hydrological and hydro-sedimentary dynamics of this river. The estimate of these gradients thus makes it possible to extrapolate specific measurements more easily and consequently to daily define the quantities of suspended matter exported by the Isère. Since 1996, the results show a very high flow, specific of the Isère at Grenoble, variable between 124 and more than 460 t km^?2 yr^?1. To cite this article: D. Dumas, C. R. Geoscience 336 (2004).     

基于改进随机蕨算法的GIS增强现实应用研究

随机蕨算法由于其简单高效,实时性好的特点,在计算机视觉领域得到了广泛的应用。但是其在构造二值特征过程中采用的基于像素点灰度值比较的方法对图像变形的适应性较差。本文基于方向梯度直方图对光照变化,图像变形鲁棒性较好的特点,利用统计方向梯度直方图取代像素灰度值进行比较,以此构造特征点二值特征。基于改进的随机蕨算法,本文设计了一种将增强现实技术(AR)应用于GIS的框架模型。实验结果表明,经过改进的随机蕨算法对目标识别的正确率得到了有效提升,且算法的实时性较好,适用于GIS的增强现实应用。     

鄂东北大别杂岩中混合岩形成的动力学机制

本文针对中小位移量伸缩缝构造进行设计研究，提出了一种常温固化型桥梁伸缩缝。经过对伸缩量Δ２０ｃｍ，Δ＝４０ｃｍ的多座桥梁的实验应用表明，这是一种适用于中小位移量桥梁中性能良好的伸缩缝，施工简便。其桥缝具体结构为，在两侧拍击区采用钢纤维混凝土增，缝内用高分子聚合物与一定比例的水泥及掺合物拌和均匀，经一段时间与桥面和加固铺装层固化成具有较高弹性和一定强度的整体式桥梁伸缩缝。其效果良好，供应用参考。     

Evaluation and application of dialysis porewater samplers for microbiological studies at sediment-water interfaces

The equilibrium diffusion technique has become a valuable tool for ecological and biogeochemical studies in aquatic environments. In sediment ecosystems, changes in concentration of microbial metabolites with increasing depth can be determined dependably and reproducibly with this technique. Since the permeation characteristics of the membranes employed are crucial, selecting the proper membrane requires knowledge about its behavior under conditions which prevail in the natural environment. Thirteen polymer sheets were evaluated comparing permeation terms for biogeochemically relevant solutes, biodegradability, and mechanical strength. Cellulose-based dialysis membranes are most satisfactory when employed in low temperature anoxic environments. For this membrane, correction terms were calculated to account for diffusion losses during retrieval and sampling. Optimal incubation times can now be predicted from experimentally determined permeation coefficients for several porewater solutes. Dialysis porewater samplers (DPS) have been successfully applied during more than 100 independent experiments for the collection of interstitial water from surface sediments. DPS were used for water depths as deep as 290 meters.     

Orographic effect on potential gradient

Potential gradients were measured in the valley of the Simhachalam hills and near the top. They were found to be higher at the top than in the valley, where they increased in the forenoon. It was the reverse at the top of the hills. The valley winds were found to play an important role in the variation of potential gradient.     

The latitudinal distribution of carbon monoxide across the pacific from California to Antarctica

The results of a research study of the carbon monoxide concentration from California to 90° S, Antarctica are presented. The data both extend and support other research studies of the latitudinal distribution of carbon monoxide in that higher concentrations are evident over the Northern Hemisphere than over the Southern Hemisphere. Carbon monoxide concentrations range between 50 to 60 ppb with a few peaks into the 60s in the latitudinal area south of the ITCZ and values of 80 ppb or higher at latitudes north of Hawaii. A comparison is also made of carbon monoxide and ozone concentrations along the flight tract between California and Antarctica, over the Ellsworth Mountains of Antarctica, and between 78° S and the South Pole. These ozone-carbon monoxide data show statistically significant negative correlations in the upper troposphere and lower stratosphere over Antarctica. It is believed that this is a good indication of mixing across the tropopause.     

Thermal regimes and degradation modes of permafrost along the Qinghai-Tibet Highway

Permafrost on the Qinghai-Tibet Plateau (QTP) is widespread, thin, and thermally unstable. Under a warming climate during the past few decades, it has been degrading extensively with generally rising ground temperatures, the deepening of the maximum summer thaw, and with lessening of the winter frost penetration. The permafrost has degraded downward, upward and laterally. Permafrost has thinned or, in some areas, has totally disappeared. The modes of permafrost degradation have great significance in geocryology, in cold regions engineering and in cold regions environmental management. Permafrost in the interior of the QTP is well represented along the Qing-hai-Tibet Highway (QTH), which crosses the Plateau through north to south and traverses 560 km of permafrost-impacted ground. Horizontally, the degradation of permafrost occurs more visibly in the sporadic permafrost zone in the vicinity of the lower limit of permafrost (LLP), along the margins of taliks, and around permafrost islands. Downward degradation develops when the maximum depth of seasonal thaw exceeds the maximum depth of seasonal frost, and it generally results in the formation of a layered talik disconnecting the permafrost from the seasonal frost layer. The downward degrada- tion is divided into four stages: 1) initial degradation, 2) accelerated degradation, 3) layered talik and 4) finally the conversion of permafrost to seasonally frozen ground (SFG). The upward degradation occurs when the geothermal gradient in permafrost drops to less than the geothermal gradients in the underlying thawed soil layers. Three types of permafrost temperature curves (stable, degrading, and phase-changing transitory permafrost) illustrate these modes. Although strong differentiations in local conditions and permafrost types exist, the various combinations of the three degradation modes will ultimately transform permafrost into SFG. Along the QTH, the downward degradation has been proceeding at annual rates of 6 to 25 cm, upward degradation at 12 to 30 cm, and lateral degradation in the sporadic permafrost zone at 62 to 94 cm during the last quarter century. These rates exceed the 4 cm per year for the past 20 years reported for the discontinuous permafrost zone in subarctic Alaska, the 3 to 7 cm per year reported in Mongolia, and that of the thaw-stable permafrost in subarctic Yakutia and Arctic Alaska.     

Research of the Conductive Structure of Crust and the Upper Mantle beneath the South-Central Tibetan Plateau

With the super-wide band magnetotelluric sounding data of the Jilong (吉隆)-Cuoqin (措勤) profile (named line 800) which was completed in 2001 and the Dingri (定日)-Cuomai (措迈) profile (named line 900) which was completed in 2004,we obtained the strike direction of each MT station by strike analysis,then traced profiles that were perpendicular to the main strike direction,and finally obtained the resistivity model of each profile by nonlinear conjugate gradients (NLCG) inversion. With these two models,we described the resistivity structure features of the crust and the upper mantle of the center-southern Tibetan plateau and its relationship with Yalung Tsangpo suture: the upper crust of the research area is a resistive layer with resistivity value range of 200-3 000 ?·m. The depth of its bottom surface is about 15-20 km generally,but the bottom surface of resistive layer is deeper in the middle of these two profiles. At line 900,it is about 30 km deep,and even at line 800,it is about 38 km deep. There is a gradient belt of resistivity at the depth of 15-45 km,and a conductive layer is beneath it with resistivity even less than 5 ?·m. This conductive layer is composed of individual conductive bodies,and at the south of the Yalung Tsangpo suture,the conductive bodies are smaller with thickness about 10 km and lean to the north slightly. However,at the north of the Yalung Tsangpo suture,the conductive bodies are larger with thickness about 30 km and also lean to the north slightly. Relatively,the conductive bodies of line 900 are thinner than those of line 800,and the depth of the bottom surface of line 900 is also shallower. At last,after analyzing the effect factors to the resistivity of rocks,it was concluded that the very conductive layer was caused by partial melt or connective water in rocks. It suggests that the middle and lower crust of the center-southern Tibetan plateau is very thick,hot,flabby,and waxy.     

Troposphere gradients from the ECMWF in VLBI analysis

Modeling path delays in the neutral atmosphere for the analysis of Very Long Baseline Interferometry (VLBI) observations has been improved significantly in recent years by the use of elevation-dependent mapping functions based on data from numerical weather models. In this paper, we present a fast way of extracting both, hydrostatic and wet, linear horizontal gradients for the troposphere from data of the European Centre for Medium-range Weather Forecasts (ECMWF) model, as it is realized at the Vienna University of Technology on a routine basis for all stations of the International GNSS (Global Navigation Satellite Systems) Service (IGS) and International VLBI Service for Geodesy and Astrometry (IVS) stations. This approach only uses information about the refractivity gradients at the site vertical, but no information from the line-of-sight. VLBI analysis of the CONT02 and CONT05 campaigns, as well as all IVS-R1 and IVS-R4 sessions in the first half of 2006, shows that fixing these a priori gradients improves the repeatability for 74% (40 out of 54) of the VLBI baseline lengths compared to fixing zero or constant a priori gradients, and improves the repeatability for the majority of baselines compared to estimating 24-h offsets for the gradients. Only if 6-h offsets are estimated, the baseline length repeatabilities significantly improve, no matter which a priori gradients are used.