Evaluating fine sediment mobilization and storage in a gravel‐bed river using controlled reservoir releases

Two controlled flow events were generated by releasing water from a reservoir into the Olewiger Bach, located near Trier, Germany. This controlled release of near bank‐full flows allowed an investigation of the fine sediment (<63 µm) mobilized from channel storage. Both a winter (November) and a summer (June) release event were generated, each having very different antecedent flow conditions. The characteristics of the release hydrographs and the associated sediment transport indicated a reverse hysteresis with more mass, but smaller grain sizes, moving on the falling limb. Fine sediment stored to a depth of 10 cm in the gravels decreased following the release events, indicating the dynamic nature and importance of channel‐stored sediments as source materials during high flow events. Sediment traps, filled with clean natural gravel, were buried in riffles before the release of the reservoir water and the total mass of fine sediment collected by the traps was measured following the events. Twice the mass of fine sediment was retained by the gravel traps compared with the natural gravels, which may be due to their altered porosity. Although the amount of fine sediment collected by the traps was not significantly related to measures of gravel structure, it was found to be significantly correlated to measures of local flow velocity and Froude number. A portion of the traps were fitted with lids to restrict surface exchange of water and sediment. These collected the highest amounts of event‐mobilized sediments, indicating that inter‐gravel lateral flows, not just surface infiltration of sediments, are important in replenishing and redistributing the channel‐stored fines. These findings regarding the magnitude and direction of fine sediment movement in gravel beds are significant in both a geomorphic and a biological context. Copyright © 2006 John Wiley & Sons, Ltd.     

砂卵石地层非开挖顶管施工地表沉降控制研究

砂卵石地层具有地层结构松散、透水性高、粘聚力小、自稳能力差等特点,往往为工程施工带来许多难题。为了更好地研究砂卵石地层非开挖顶管施工时地表的沉降规律及相应的控制措施,以成都市华阳、万安、正兴片区雨污水管网W31-W32顶管段为研究对象,采用工法比较、数值模拟与现场实测相结合的方法,提出了适用于砂卵石地层地表沉降的控制措施。研究结果表明：在砂卵石地层中,采用袖阀管注浆加固管周土体与高压旋喷桩加固洞门的措施是合理有效的,加固后地表沉降量相较于未加固时降低了48.1%,洞门处的地表沉降量降低了51.1%,满足了地表沉降控制要求,验证了地层加固措施的效果,可为后续类似的非开挖顶管施工提供借鉴。     

物质组成特征对碎石土斜坡变形破坏影响研究

为研究物质组成空间分布特征对降雨下碎石土斜坡变形破坏的影响,以不同成因碎石土斜坡的特点为依照,进行了4种物质组成空间分布的碎石土斜坡模型及1种均质斜坡模型试验。结果表明,物质组成空间分布特征对降雨下碎石土斜坡变形破坏所发挥的作用与降雨入渗方向和应力调整方向有重要关系。当土料变化方向与入渗方向大角度相交且与应力调整方向相同时,斜坡渗透性为土料各自的渗透性,斜坡力学性质偏向于组成土料力学性质的最大值。当土料变化方向与入渗方向相同且与应力调整方向大角度相交时,斜坡渗透性接近组成土料渗透性的最小值,斜坡变形破坏受控于其中的软弱土料。降雨下斜坡各处均发生变形,且变形向周围调整并产生影响。破裂面更易发于软弱土料中。该研究有助于斜坡灾害勘察、预测评价及防治向精细化方向发展。     

Coarse Estuary Mouth Ballast Gravel Deposits: A Sourcing Case History

Pebbles and cobbles along the channel margin of the Tayport-Tentsmuir tidal flats rest on eroded surfaces of layered sands. Their origin and source have been hitherto unexplained, although they are evidently relatively local. The compositional assemblage of the well-rounded clasts is compared with those of pebbles in the tills and fluvio-glacial deposits of Fife and Tayside, in the River Earn and in the River Tay at Perth. The closest similarity is with the latter site. It is suggested that the material was transported to Tayport as ballast for lighters prior to trans-shipping of cargoes for Perth from larger vessels moored off Tayport. A sloop or brig of 100 tons would have carried about 20 tons of ballast. Trading by one vessel per week over a time period of a century could have accounted for the transport of 100000 tons of the material concerned. Removal of the ballast by barge from Tayport enabled the building of Lucky Scalp island. Attempts to improve the underfoot conditions for salmon fishing are believed to have been responsible for the spreading of ballast along the outer margin of the tidal flats.     

Bed-material transport estimated from channel surveys: Vedder River,British Columbia

This study investigates the possibility to estimate bed-material transfer in gravel-bed rivers by analysis of morphological changes along Vedder River, British Columbia. Data from repeated cross-section surveys are used to estimate volume changes along the length of an 8 km reach. Gravel budgets are based on a continuity approach. An error analysis is performed to evaluate the uncertainty in the best estimate of transport rates. The mean annual gravel transport into the reach over a 9 year period was estimated to be 36600 ± 5600 m³ yr^?1. The sediment transport regime along the length of the river is evaluated and examined in relation to peak flood flows. Significant spatial and temporal variability in transport rates is demonstrated, making dubious the generalization of transport estimates from hydraulic calculations, or from sample measurements at a single cross-section. The assumptions, procedures and limitations of the ‘morphological approach’ to sediment transport analysis are discussed. It is concluded that this approach provides information of quality comparable or superior to that of direct measurements of transport, yet requires less field effort. It also provides additional information about river morphological changes, making it a preferred method for geomorphlogical investigations and for many river management concerns.     

强夯碎石柱法处理淤泥质粘土地基

常规强夯法处理淤泥质粘土地基效果不太理想。本文论述了强夯碎石柱法的原理及应用的可行性,对夯后形成复合地基的沉降、固结,稳定性等问题用多种方法进行了计算,讨论了施工中可能出现的情况。国内外成功的实例表明该法在处理饱和软粘土地基时有着良好的应用前景。     

Channel response to gravel mining activities in mountain rivers

The removal of bed material from active river channels usually affects the bed profile of the streambed, causing progressive degradation upstream and downstream of the extraction site. These effects can extend for kilometers affecting hydraulic structures located in the vicinity of the river reach. In this paper, the geomorphic effects of gravel mining are reviewed and summarized. Some cases in Venezuelan streams are presented to illustrate the problem. To describe the processes of erosion and sedimentation in a gravel extraction pit, a recent developed mathematical model for the simulation of flow and sediment transport in gravel-cobble bed streams is applied to a hypothetical case of gravel mining in a river channel. A simple rectangular dredge pit is imposed as initial condition in the channel bed, and changes in bed elevations and grain size distribution of bed material are calculated by using the numerical model. The process of deposition within the pit, and the downstream and upstream migration of the erosion wave are well simulated by the model and closely resemble the phenomena observed in laboratory experiments. The response of the friction coefficient to the changes in flow and bed elevations shows the importance in modeling adequately flow resistance and sediment transport in gravel-cobble bed streams.     

Particle clusters in gravel‐bed rivers: an experimental morphological approach to bed material transport and stability concepts

Structured gravel river beds clearly exert a major influence on bed stability. Indexing structural stability by field measurements of bed strength neglects the processes operating to entrain and transport bed material in different parts of each structure. This study takes a morphological approach to interpreting the critical processes, using particle tracing to determine the movement of individual cluster particles over a range of flood event magnitudes and durations. The experiment was carried out on the River South Tyne, UK; it uses flow hydrographs measured nearby and also benefits from previous studies of historical development, channel morphology and sediment transport at the same site. More than 30 clusters were monitored over a seven‐month period during which clusters occupied 7–16 per cent of the bed. Threshold flows delimiting three apparently contrasting bed sediment process regimes for cluster particles are tentatively set at 100 m³ s^?1 and 183 m³ s^?1; durations of flow at these levels are critical for cluster development, rather than flow peak values. Wake particles are transported most easily. Flow straightening in the wandering channel planform reduces the stability of clusters, since mechanical strength is markedly reduced by this change of direction. The overall area covered by clusters between significant transport events varies little, implying a dynamic equilibrium condition. Copyright © 2005 John Wiley & Sons, Ltd.     

Coarse sediment transport in mountain streams in Colorado and Wyoming,USA

Since the early 1990s, US Forest Service researchers have made thousands of bedload measurements in steep, coarse‐grained channels in Colorado and Wyoming, USA. In this paper we use data from 19 of those sites to characterize patterns and rates of coarse sediment transport for a range of channel types and sizes, including step–pool, plane‐bed, pool–riffle, and near‐braided channels. This effort builds upon previous work where we applied a piecewise regression model to (1) relate flow to rates of bedload transport and (2) define phases of transport in coarse‐grained channels. Earlier, the model was tested using bedload data from eight sites on the Fraser Experimental Forest near Fraser, Colorado. The analysis showed good application to those data and to data from four supplementary channels to which the procedure was applied. The earlier results were, however, derived from data collected at sites that, for the most part, have quite similar geology and runoff regimes. In this paper we evaluate further the application of piecewise regression to data from channels with a wider range of geomorphic conditions. The results corroborate with those from the earlier work in that there is a relatively narrow range of discharges at which a substantial change in the nature of bedload transport occurs. The transition from primarily low rates of sand transport (phase I) to higher rates of sand and coarse gravel transport (phase II) occurs, on average, at about 80 per cent of the bankfull (1·5‐year return interval) discharge. A comparison of grain sizes moved during the two phases showed that coarse gravel is rarely trapped in the samplers during phase I transport. Moreover, the movement and capture of the D₁₆ to D₂₅ grain size of the bed surface seems to correspond with the onset of phase II transport, particularly in systems with largely static channel surfaces. However, while there were many similarities in observed patterns of bedload transport at the 19 studied sites, each had its own ‘bedload signal’ in that the rate and size of materials transported largely reflected the nature of flow and sediment particular to that system. Published in 2005 by John Wiley & Sons, Ltd.