类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

温州世贸中心大厦钻孔灌注桩施工技术

介绍了温州世贸中心大厦钻孔灌注桩的主要特点和施工难点，以及在生产施工中所采取的主要技术措施，特别针对该工程中风化残留体施工难度大、桩孔深的特点，介绍了相应的处理办法和注意事项。     

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.     

Rock albedo and monitoring of thermal conditions in respect of weathering: some expected and some unexpected results

Broadly speaking, there is, at least within geomorphic circles, a general acceptance that rocks with low albedos will warm both faster and to higher temperatures than rocks with high albedos, reflectivity influencing radiative warming. Upon this foundation are built notions of weathering in respect of the resulting thermal differences, both at the grain scale and at the scale of rock masses. Here, a series of paving bricks painted in 20 per cent reflectivity intervals from black through to white were used to monitor albedo‐influenced temperatures at a site in northern Canada in an attempt to test this premise. Temperatures were collected, for five months, for the rock surface and the base of the rock, the blocks being set within a mass of local sediment. Resulting thermal data did indeed show that the dark bricks were warmer than the white but only when their temperatures were equal to or cooler than the air temperature. As brick temperature exceeded that of the air, so the dark and light bricks moved to parity; indeed, the white bricks frequently became warmer than the dark. It is argued that this ‘negating’ of the albedo influence on heating is a result of the necessity of the bricks, both white and black, to convect heat away to the surrounding cooler air; the darker brick, being hotter, initially convects faster than the white as a product of the temperature difference between the two media. Thus, where the bricks become significantly hotter than the air, they lose energy to that air and so their respective temperatures become closer, the albedo influence being superceded by the requirement to equilibrate with the surrounding air. It is argued that this finding will have importance to our understanding of weathering in general and to our perceptions of weathering differences between different lithologies. Copyright © 2005 John Wiley & Sons, Ltd.     

Microorganisms in Lianxian lateritic gold deposit in Guangdong and their effects on leaching of heavy metals

Microorganisms in the lateritic profiles of the Lianxian gold deposit in Guangdong were cultured, isolated and identified. The microorganisms include bacteria such as Bacillus, Enterobacter, Pseudomonas, Lactobacillus, Actinetobacter, Aeromona, Listeria, Agrobacteriura, Cotyttebacteriurn, and Moraxella, fungi such as Penicillium, Alter naria, Cladosporium, Saccharcornyces, Mucor, and the chemoautotrophic Thiobacillu.~. It is shown in a leaching experiment that the microorganisms can accelerate the leaching of Cu, Cd, Zn, and that the G- bacteria are most efficient for leaching Cu, Zn and the G^ bacteria are better for leaching Cd.     

Saprolite Remnants as Indicators of Pre-Glacial Landform Genesis in Southeast Sweden

Twenty‐six sites with remnants of gravelly saprolites (grus) have been located in southeast Sweden. Joint block hills (castle kopjes) and steep rock walls with weathered joints as well as rounded boulders are documented to have an origin in deep weathering and subsequent stripping of saprolites. The saprolite remnants and landforms result from the fragmentation of the re‐exposed sub‐Cambrian peneplain along fracture systems. Only shallow saprolites occur on the elevated intact parts of the sub‐Cambrian peneplain, while saprolites up to 20 m thick are encountered in areas where the sub‐Cambrian peneplain is fractured and dissected. Neogene uplift with reactivation of the weathering system is thought to be the main cause of saprolite formation. Deep weathering is thus judged to have been the major agent of landform formation in the study area, while glacial and glaciofluvial erosion has contributed mainly by stripping saprolites, detaching corestones, and plucking joint blocks along weathered joints.     

Element mobility during pyrite weathering: implications for acid and heavy metal pollution at mining-impacted sites

Based on back scattered electron images and electron micro-probe analysis results, four alteration layers, including a transition layer, a reticulated ferric oxide layer, a nubby ferric oxide layer and a cellular ferric oxide layer, were identified in the naturally weathering products of pyrite. These layers represent a progressive alteration sequence of pyrite under weathering conditions. The cellular ferric oxide layer correlates with the strongest weathering phase and results from the dissolution of nubby ferric oxide by acidic porewater. Leaching coefficient was introduced to better express the response of element mobility to the degree of pyrite weathering. Its variation shows that the mobility of S, Co and Bi is stronger than As, Cu and Zn. Sulfur in pyrite is oxidized to sulfuric acid and sulfate that are basically released into to porewater, and heavy metals Co and Bi are evidently released by acid dissolution. As, Cu and Zn are enriched in ferric oxide by adsorption and by co-precipitation, but they would re-release to the environment via desorption or dissolution when porewater pH becomes low enough. Consequently, Co, Bi, As, Cu and Zn may pose a substantial impact on water quality. Considering that metal mobility and its concentration in mine waste are two important factors influencing heavy metal pollution at mining-impacted sites, Bi and Co are more important pollutants in this case.     

Chemical weathering and CO2 consumption in the glaciated Karuxung River catchment,Tibetan Plateau

Climate factors play critical roles in controlling chemical weathering, while chemically weathered surface material can regulate climate change. To estimate global chemical weathering fluxes and CO₂ balance, it is important to identify the characteristics and driving factors of chemical weathering and CO₂ consumption on the Tibetan Plateau, especially in glaciated catchments. The analysis of the hydro-geochemical data indicated that silicate weathering in this area was inhibited by low temperatures, while carbonate weathering was promoted by the abundant clastic rocks with fresh surfaces produced by glacial action. Carbonate weathering dominated the riverine solute generation (with a contribution of 58%, 51%, and 43% at the QiangYong Glacier (QYG), the WengGuo Hydrological Station (WGHS), and the lake estuary (LE), respectively). The oxidation of pyrite contributed to 35%, 42%, and 30% of the riverine solutes, while silicate weathering contributed to 5%, 6%, and 26% of the riverine solutes at the QYG, WGHS, and LE, respectively. The alluvial deposit of easily weathering fine silicate minerals, the higher air temperature, plant density, and soil thickness at the downstream LE in comparison to upstream and midstream may lead to longer contact time between pore water and mineral materials, thus enhancing the silicate weathering. Because of the involvement of sulfuric acid produced by the oxidation of pyrite, carbonate weathering in the upstream and midstream did not consume atmospheric CO₂, resulting in the high rate of carbonate weathering (73.9 and 75.6 t km⁻² yr⁻¹, respectively, in maximum) and potential net release of CO₂ (with an upper constraint of 35.6 and 35.2 t km⁻² yr⁻¹, respectively) at the QYG and WGHS. The above results indicate the potential of the glaciated area of the Tibetan Plateau with pyrite deposits being a substantial natural carbon source, which deserves further investigation.     

Supraglacial weathering crust dynamics inferred from cryoconite hole hydrology

Water levels in cryoconite holes were monitored at high resolution over a 3‐week period on Austre Brøggerbreen (Svalbard). These data were combined with melt and energy balance modelling, providing insights into the evolution of the glacier's near‐surface hydrology and confirming that the hydrology of the near‐surface, porous ice known as the ‘weathering crust’ is dynamic and analogous to a shallow‐perched aquifer. A positive correlation between radiative forcing of melt and drainage efficiency was found within the weathering crust. This likely resulted from diurnal contraction and dilation of interstitial pore spaces driven by variations in radiative and turbulent fluxes in the surface energy balance, occasionally causing ‘sudden drainage events’. A linear decrease in water levels in cryoconite holes was also observed and attributed to cumulative increases in near‐surface ice porosity over the measurement period. The transport of particulate matter and microbes between cryoconite holes through the porous weathering crust is shown to be dependent upon weathering crust hydraulics and particle size. Cryoconite holes therefore yield an indication of the hydrological dynamics of the weathering crust and provide long‐term storage loci for cryoconite at the glacier surface. This study highlights the importance of the weathering crust as a crucial component of the hydrology, ecology and biogeochemistry of the glacier ecosystem and glacierized regions and demonstrates the utility of cryoconite holes as natural piezometers on glacier surfaces. Copyright © 2015 John Wiley & Sons, Ltd.     

Bacterially-mediated weathering of crystalline and amorphous Cu-slags

Two types of Cu-slags (CS: crystalline massive slag and GS: granulated amorphous slag) exhibiting a different chemical and mineral phase composition were compared with respect to their susceptibility to bacterial weathering using Pseudomonas aeruginosa (n° CIP 105094). Abiotic conditions e.g. sterile growth medium and ultrapure water were used for comparison. The experiments were extended up to 112 days with a systematic liquid phase renewal every 14 days. The results revealed significant release of elements in the bacterially mediated weathering experiments. Concentrations of elements (Si, Fe, Cu, Zn and Pb) in the biotic solutions were increased at least by 20% up to 99% compared to abiotic ones. From 3 to 77% of the leached elements were associated to the fraction >0.22 μm. Scanning electron microscope observations demonstrated greater weathering of mineral phases in biotic experiments than in abiotic ones which is in accordance with the solution chemistry exhibiting higher concentrations of elements leached in biotic set-ups. In the case of CS, glass and sulfides weathering was yet observed in abiotic experiment, whereas partial dissolution of fayalite (Fe₂SiO₄) was solely affected by the presence of bacteria. GS having a higher bulk content of metallic elements was found to be more stable than sulfide-bearing CS, while its (GS) glass matrix was found to weather easier under biotic conditions.