川滇黔桂76种元素地球化学图编制中分析方法与分析质量研究(一) 不同实验室产生地球化学图的相似性——以Ag、Cs、Ga、Ge为例

编制中国76种元素地球化学图将使我们首次了解元素周期表上除氢、氧及惰性气体之外所有元素在中国大陆表层的分布,川滇黔桂76种元素地球化学图的编制是这一研究项目的试点。本文以不同实验室取得的Ag、Cs、Ga、Ge分析数据为例,探索、衡量不同实验室地球化学图相似性的方法,以优选实验室进行川滇黔桂4省区约4000件组合样76种元素的大规模分析工作。     

基于GIS的区域地质调查数字制图--以1∶5万<里庄幅>为例

本文以 1∶5万里庄幅为例 ,阐述了运用GIS系统对区调过程中各种资料的处理与编辑方法 ,并介绍了数字制图方法及工艺流程 ,提出了GIS系统在 1∶5万区调工作中的应用前景     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

A Reconnaissance Method for Delineation of Tracts for Regional-Scale Mineral-Resource Assessment Based on Geologic-Map Data

The U.S. Geological Survey (USGS) is proposing to conduct a global mineral-resource assessment using geologic maps, significant deposits, and exploration history as minimal data requirements. Using a geologic map and locations of significant pluton-related deposits, the pluton-related-deposit tract maps from the USGS national mineral-resource assessment have been reproduced with GIS-based analysis and modeling techniques. Agreement, kappa, and Jaccard's C correlation statistics between the expert USGS and calculated tract maps of 87%, 40%, and 28%, respectively, have been achieved using a combination of weights-of-evidence and weighted logistic regression methods. Between the experts' and calculated maps, the ranking of states measured by total permissive area correlates at 84%. The disagreement between the experts and calculated results can be explained primarily by tracts defined by geophysical evidence not considered in the calculations, generalization of tracts by the experts, differences in map scales, and the experts' inclusion of large tracts that are arguably not permissive. This analysis shows that tracts for regional mineral-resource assessment approximating those delineated by USGS experts can be calculated using weights of evidence and weighted logistic regression, a geologic map, and the location of significant deposits. Weights of evidence and weighted logistic regression applied to a global geologic map could provide quickly a useful reconnaissance definition of tracts for mineral assessment that is tied to the data and is reproducible.     

A study on the early-warning technique concerning debris flow disasters

According to the principle of the eruption of debris flows, the new torrent classification techniques are brought forward. The torrent there can be divided into 4 types such as the debris flow torrent with high destructive strength, the debris flow torrent, high sand-carrying capacity flush flood torrent and common flush flood by the techniques. In this paper, the classification indices system and the quantitative rating methods are presented. Based on torrent classification, debris flow torrent hazard zone mapping techniques by which the debris flow disaster early-warning object can be ascertained accurately are identified. The key techniques of building the debris flow disaster neural network (NN)real time forecasting model are given detailed explanations in this paper, including the determination of neural node at the input layer, the output layer and the implicit layer, the construction of knowledge source and the initial weight value and so on. With this technique, the debris flow disaster real-time forecasting neural network model is built according to the rainfall features of the historical debris flow disasters, which includes multiple rain factors such as rainfall of the disaster day, the rainfall of 15 days before the disaster day, the maximal rate of rainfall in one hour and ten minutes. It can forecast the probability, critical rainfall of eruption of the debris flows, through the real-time rainfall monitoring or weather forecasting. Based on the torrent classification and hazard zone mapping, combined with rainfall monitoring in the rainy season and real-time forecasting models, the debris flow disaster early-warning system is built. In this system, the GIS technique, the advanced international software and hardware are applied, which makes the system′s performance steady with good expansibility. The system is a visual information system that serves management and decision-making, which can facilitate timely inspect of the variation of the torrent type and hazardous zone, the torrent management, the early-warning of disasters and the disaster reduction and prevention.     

Competitive Adjustment and Advancement in Global Commodity Chains II: The Case of the Singapore Garment Industry

This is the second part of a contribution to the debate on the possibilities of leveraging economic globalisation — through incorporation in international production networks and global commodity chains (GCCs) — as a strategy for developing countries to industrialise and advance their position in the world economy. In the first part, we analysed the experience of the East Asian apparel industry and addressed the issues of sustaining positions, upgrading to more rewarding roles, and advancing to less dependent positions within production networks and GCCs. We developed an analytical framework at both the firm and industry levels, and subsequently identified alternative firm- and industry-level strategies and trajectories. The present paper deals with these issues in the context of the Singapore apparel industry. Based on extensive empirical research, we demonstrate that although the East Asian experience of upgrading and repositioning within the GCC is to some extent emulated in the case of the Singapore apparel industry, the outcomes have been less favourable in terms of the depth, extent and strength of these trajectories. The differing outcomes can be explained in terms of different (systemic) conditions in the Singapore business environment, including the agency of local players, the geography of sourcing networks, and the role of the state and prevailing business attitudes. Our conclusions merit continued attention in both research and policy circles on the development of capabilities at the firm level, and the role of local business and institutional environments in local industry development processes under globalisation.     

Global heat budget, plate tectonics and climatic change

For the past 2000 Ma, the temperature of the Earth's surface has fluctuated around a mean similar to that of today, although individual locations have undergone long-term changes of ∼30°C at different times in different places. Water bodies absorb at least five times as much solar radiation as land surfaces, and ocean currents transport the excess heat absorbed in the tropics towards the poles. Changes in the distribution of land and sea due to plate tectonics explain the major temperature fluctuations (>25°C) around the globe in the last 350 Ma, and are first-order controls. Large-scale changes in ocean currents and thermohaline circulations are probably second-order controls (15–25°C). The Milankovitch orbital cycles are third-order controls producing variations in air temperature of the order of 10°C, while massive volcanic eruptions and changes in carbon dioxide are amongst the fourth-order controls producing minor perturbations (<5°C). The major climatic fluctuations are continuous but regional in effect and not global. Extraterrestrial factors may not cause major changes in climate when viewed from a geological perspective.     

On the spatial relationship between landslides and causative factors on Lantau Island, Hong Kong

This paper presents a statistical approach to study the spatial relationship between landslides and their causative factors at the regional level. The approach is based on digital databases, and incorporates such methods as statistics, spatial pattern analysis, and interactive mapping. Firstly, the authors propose an object-oriented conceptual model for describing a landslide event, and a combined database of landslides and environmental factors is constructed by integrating the various databases within such a conceptual framework. The statistical histogram, spatial overlay, and dynamic mapping methods are linked together to interactively evaluate the spatial pattern of the relationship between landslides and their causative factors. A case study of an extreme event in 1993 on Lantau Island indicates that rainfall intensity and the migration of the center of the rainstorm greatly influence the occurrence of landslides on Lantau Island. A regional difference in the relationship between landslides and topography is identified. Most of the landslides in the middle and western parts of the island occurred on slopes with slope angles of 25–35°, while in the eastern part, the corresponding range is 30–35°. Overlaying landslide data with land cover reveals that a large number of landslides occurred in the bareland and shrub-covered area, and in the transition zones between different vegetation types. The proposed approach can be used not only to analyze the general characteristics of such a relationship, but also to depict its spatial distribution and variation, thereby providing a sound basis for regional landslide prediction.