哈尔滨市磨盘山水利枢纽区三维渗流数值模拟模型研究

哈尔滨市磨盘山水库防渗型式拟采用垂直砼防渗墙及帷幕灌浆方案。为了分析左岸不同长度防渗对水库渗漏量及坝基渗透稳定性的影响。对磨盘山水利枢纽区渗流场进行了三维数值模拟研究。结果表明，随着左岸防渗长度的增大。渗漏量及下游渗流出口渗透比降基本呈线性趋势减小。当左岸防渗长度为200m时。渗漏量及各渗透比降均小于允许值，为推荐的渗控方案。     

The submarine eruption of the Bombarda volcano,Milos Island,Cyclades, Greece

The Milos volcanic field includes a well-exposed volcaniclastic succession which records a long history of submarine explosive volcanism. The Bombarda volcano, a rhyolitic monogenetic center, erupted ∼1.7 Ma at a depth <200 m below sea level. The aphyric products are represented by a volcaniclastic apron (up to 50 m thick) and a lava dome. The apron is composed of pale gray juvenile fragments and accessory lithic clasts ranging from ash to blocks. The juvenile clasts are highly vesicular to non-vesicular; the vesicles are dominantly tube vesicles. The volcaniclastic apron is made up of three fades: massive to normally graded pumice-lithic breccia, stratified pumice-lithic breccia, and laminated ash with pumice blocks. We interpret the apron beds to be the result of water-supported, volcaniclastic mass-How emplacement, derived directly from the collapse of a small-volume, subaqueous eruption column and from syn-eruptive, down-slope resedimentation of volcaniclastic debris. During this eruptive phase, the activity could have involved a complex combination of phreatomagmatic explosions and minor submarine effusion. The lava dome, emplaced later in the source area, is made up of flow-banded lava and separated from the apron by an obsidian carapace a few meters thick. The near-vertical orientation of the carapace suggests that the dome was intruded within the apron. Remobilization of pyroclastic debris could have been triggered by seismic activity and the lava dome emplacement. Published online: 30 January 2003 Editorial responsibility: J. McPhie     

Fluid flow and mineralization of Youjiang Basin in the Yunnan-Guizhou-Guangxi area, China

Comprehensive studies, based on isotope geochemistry of C, H, O, S and Sr, chronology, common element and trace element geochemistry of fluid inclusions for the epithermal Au, As, Sb and Hg deposits in the Youjiang Basin and its peripheral areas, suggested that the ore fluid was the basin fluid with abundant metallic elements and the large-scale fluid flow of the same source in the late Yenshan stage was responsible for huge epithermal mineralization and silicification. The ore fluid flowed from the basin to the platform between the basin and the platform and migrated from the inter-platform basin to the isolated platform in the Youjiang Basin. The synsedimentary faults and paleokast surface acted respectively as main conduits for vertical and lateral fluid flow.     

Velocity structure of uppermost mantle beneath North China from Pn tomography and its implications

20301 Pn arrival time data are collected from the seismological bulletins of both national and regional seismic networks. Pn travel time residuals are tomographically inverted for the Pn velocity structure of uppermost mantle beneath North China. The result indicates that the average Pn velocity in North China is 7.92 km/s, and the velocity varies laterally from ?0.21 to +0.29 km/s around the average. The approximately NNE trending high and low velocity regions arrange alternatively west-eastward. From west to east we can see high velocity in the middle Ordos region, the Shanxi graben low, the Jizhong depression high, the west Shandong uplift and Bohai Sea low, and the high velocity region to the east of the Tanlu fault. In the southern boundary zone of the North China block, except for the high velocity in the Qingling Mountains region, the velocity is generally lower than the average. Obvious velocity anisotropy is seen in the Datong Cenozoic volcanic region, with the fast velocity direction in NNE-SSW. Notable velocity anisotropy is also seen around the Bay of Bohai Sea, and the fast velocity directions seem to show a rotation pattern, possibly indicating a flow-like deformation in the uppermost mantle there. The Pn velocity variations show a reversed correlation with the Earth's heat flow. The low Pn velocity regions generally show high heat flow, e.g., the Shanxi graben and Bohai Sea region. While the high Pn velocity regions usually manifest low heat flow, e.g., the region of Jizhong depression. This indicates that the Pn velocity variation in the study region is mainly aroused by the regional temperature difference in the uppermost mantle. Strong earthquakes in the crust tend to occur in the region with the abnormal low Pn velocity, or in the transition zone between high and low Pn velocity regions. The earthquakes in the low velocity region are shallower, while that in the transition zone are deeper.     

沉积盆地异常低压与低压油气藏成藏机理综述

地下异常低压主要有两种成因：抬升—剥蚀反弹和在介质孔隙度、渗透率非均质性条件下的区域地下水稳态流动，而化学渗透与流体“冷却”在低压形成中只起次要作用。根据圈闭类型、储盖组合及成藏过程，将低压油气藏分为三种类型：①常规地层型(除砂岩透镜体外)低压油气藏，低渗透岩石通常起遮挡作用，底水与边水不发育；②砂岩透镜体低压油气藏，通常分布于盆地中心的深部，具有不含水、充满油气的特点，油气的充注和水的排出与构造抬升之前压实作用、超压引起的水驱裂缝和毛细管力的作用有关，抬升—剥蚀引起的异常低压导致水由砂岩向页岩的流动有助于油气藏中水的排出；③深盆区低渗透储层低压气藏，通常分布在含水层的下倾方向(气水倒置)，异常低压是由于构造抬升致使超压向低压演化的结果。实例研究表明，构造抬升盆地中的低压系统是一个水动力相对封闭的体系，有利于油气的聚集与保存。     

0．7Ma以来的念青唐古拉山脉隆升过程——来自冰川剥蚀作用的证据

通过对念青唐古拉山冰碛地层划分及冰碛物同位素测年，发现最早一期冰碛物形成于0．7～0．6MaBP，指示自中更新世以来念青唐古拉山脉开始隆升，主峰地区发生了大规模的冰川剥蚀作用，形成了大面积分布的冰碛高平台；0．2～0．14MaBP念青唐古拉山又快速隆升，并堆积了刚刚伸出各大沟谷口的高侧碛；0．07～0．03MaBP念青唐古拉山再次小规模隆起，形成各大沟谷内的侧碛和终碛垄；0．01Ma BP还有小规模冰川活动。念青唐古拉山主峰地区的冰川剥蚀作用反映出的山脉隆升过程，可较好地与青藏高原的隆起过程相对比，它应是青藏高原隆升的响应。     

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.     

Hazard Zoning for Landslides Connected to Torrential Floods in the Jerte Valley (Spain) by using GIS Techniques

The Jerte Valley is anortheast-southwest tending graben located in the mountainous region of west central Spain (Spanish Central System). Mass movements have been a predominant shaping process on the Valley slopes during the Quaternary. Present day activity is characterized as either `first-time failure' (shallow debris slides and debris flows) or `reactivations' of pre-existing landslides deposits.A delineation of landslide hazard zoningwithin the Valley has been carried out by using the detailed documentation of a particular event (a debris slide and a sequel torrential flood, which occurred on the Jubaguerra stream gorge), and GIS techniques. The procedure has had four stages, which are: (1) the elaboration of a susceptibility map (spatial prediction) of landslides; (2) the elaboration of a map of `restricted susceptibility' in the particular case of slopes that are connected to streams and torrents (gorges); (3) the elaboration of a digital model which relates the altitude to the occurrence probability of those particular precipitation conditions which characterized the Jubaguerra event and (4) the combination of the probability model with the `restricted susceptibility map', to establish `critical zones' or areas which are more prone to the occurrence of phenomena that have same typology as this one.     

Pull-down basin in the central part of Japan due to subduction-induced mantle flow

The driving force for the basin subsiding against isostatic balance in and around Lake Biwa in the Kinki district, Japan is discussed. The lake region is characterized by strong negative Bouguer anomalies, especially by a steep horizontal gradient zone of gravity anomaly running along the western margin of the lake. The large negative anomaly (>50 mgal) cannot be explained by low-density sediments beneath it. A down-warping structure extending to the Moho depth should be taken into account. This conjecture has been strongly supported by a short-period receiver function imaging, which shows a clear offset of about 8 km for the Moho discontinuity under the steep gravity gradient zone.A question arises as to what is the driving force to create such a large down-warping structure. We consider that the subduction of the shallow-dipping slab under the region (Philippine Sea Slab) may cause crustal deformation by dragging the viscous mantle downward. In order to verify this model, we simulated the induced mantle flow due to the subduction of the Philippine Sea Slab and the pressure distribution on the crust–mantle boundary. This numerical experiment showed that the induced flow makes a strong negative pressure zone under the lake region if the slab has a vertical offset along the direction of subduction. This offset of the slab is consistent with plate models deduced from hypocentral distributions and Sp phases of the deep-focus earthquakes.     

Generalized Coarse Graining Procedures for Flow in Porous Media

This paper focuses on heterogeneous soil conductivities and on the impact their resolution has on a solution of the piezometric head equation: owing to spatial variations of the conductivity, the flow properties at larger scales differ from those found for experiments performed at smaller scales. The method of coarse graining is proposed in order to upscale the piezometric head equation on arbitrary intermediate scales. At intermediate scales large scale fluctuations of the conductivities are resolved, whereas small scale fluctuations are smoothed by a partialy spatial filtering procedure. The filtering procedure is performed in Fourier space with the aid of a low-frequency cut-off function. We derive the partially upscaled head equations. In these equations, the impact of the small scale variability is modeled by scale dependent effective conductivities which are determined by additional differential equations. Explicit results for the scale dependent conductivity values are presented in lowest order perturbation theory. The perturbation theory contributions are summed up with using a renormalisation group analysis yielding explicit results for the effective conductivity in isotropic media. Therefore, the results are also valid for highly heterogeneous media. The results are compared with numerical simulations performed by Dykaar and Kitanidis (1992). The method of coarse graining combined by a renormalisation group analysis offers a tool to derive exact and explicit expressions for resolution dependent conductivity values. It is, e.g., relevant for the interpretation of measurement data on different scales and for reduction of grid-block resolution in numerical modeling. This revised version was published online in July 2006 with corrections to the Cover Date.