弯道超高法在泥石流流速计算中的应用——以四川省汶川县G317国道磨子沟泥石流为例

选取四川省汶川至马尔康公路线的磨子沟作为试验对象,采用弯道超高法推算其泥石流流速。进而可以计算出该次泥石流的平均流量,为公路的改建工程提供设计依据。经过实地调查,用此方法计算磨子沟2005年8月17日暴发的泥石流流速为4.4m/s。同其他流速方法计算的结果相比较,前者值偏大,且偏向于工程安全值。弯道超高法可以解决泥石流观测的局限性和泥石流发生的不可重复性。此方法简便易行,对泥石流防治工程具有一定的实用价值。     

Design of Inclined Covers with Capillary Barrier Effect

A design procedure is proposed to minimize water infiltration into landfills by optimizing the water diversion length of inclined covers with capillary barrier effect (CCBE). This design procedure is based on a conceptual, mathematical and numerical approach and aims at selecting materials and optimizing layer thickness. Selection among candidate materials is made based on their hydraulic conductivity functions and on a threshold infiltration rate imposed on the designer. The capillary break layer (CBL; bottom layer) is characterized by a weak capillarity, while the moisture retention layer (MRL; upper layer) is characterized by a compromise between strong capillarity and high hydraulic conductivity. The thickness of the CBL corresponds to the height where suction reaches its maximum value for a given infiltration rate. This height can be calculated using the Kisch [Géotechnique 9 (1959)] model. The optimal thickness of the MRL is determined by applying an adaptation of the Ross [Water Resources Research 26 (1990)] model. The results obtained using the proposed design procedure were compared to those obtained from numerical simulations performed using a finite element unsaturated seepage software. The procedure was applied for two cover systems; one where deinking by-products (DBP) were used as MRL and sand as CBL and another where sand was used as MRL and gravel as CBL. Using this procedure, it has been shown that an infiltration control system composed of thin layers of sand over gravel is highly efficient in terms of diversion length and that its efficiency can be enhanced by placing a hydraulic barrier – such as a layer of DBP – above the MRL.     

The Alcamayo and Cedrobamba catastrophic debris flow (January, March and April 2004) in Machupicchu area—Peru

A debris flow originating from the Alcamayo River on 10th April 2004 destroyed a part of the town of Aguas Calientes, resulting in 11 victims, and with serious affects to the tourist flow to the Machupicchu inka citadel. On the same day, as well as in January and March 2004, other similar phenomena occurred on the Cedrobamba and Leonchayoq Rivers, affecting the railway and an electrical tower, and disrupting the train service.     

Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at     

Chemical characterization of the Neogene Aquifer, Belgium

The evolution of groundwater chemistry along the direction of groundwater flow was studied using hydrochemical data from samples collected along a flow line in the Neogene Aquifer, Belgium. Infiltrating water was found to have a very low mineral content and low pH because the sediments are strongly decalcified. Increasing SiO₂ and cation concentrations along the groundwater flow line indicate silicate-weathering processes, confirmed with the aid of saturation indices, calculated with PHREEQC, and stability diagrams. A classification system based on redox sensitive species was developed and shows that an extensive redox sequence is present in the aquifer. At a shallow depth, pyrite oxidation has caused an increase in sulphate, while iron is precipitated as hydroxides. Elevated arsenic concentrations are related to the reduction of these iron hydroxides at a relatively shallow depth and to the dissolution of siderite at greater depth. Dissolution of carbonate in the aquifer material, present in deep layers and to the north, has lead to increased Ca²⁺ and HCO₃ ^? concentrations. The Ca²⁺ from the groundwater is exchanged for Na⁺, Mg²⁺ and K⁺ adsorbed to the clay surfaces at the bottom of the groundwater reservoir. Although the Neogene Aquifer is well flushed, there are still some marine influences present in the deepest parts.     

Some Observations on the Use of Data from Historical Documents in Debris-Flow Studies

The knowledge of past events is important for the assessment of debris-flow hazard. Amongst the sources of information, documents from historical archives are particularly important in sites where the debris flows cause damage to urban areas and transportation routes. The paper analyses the availability of historical documents on debris flows in Northeastern Italy and discusses factors that can influence the building of time series from archive data both at regional and single basin scales. An increased number of debris flows was observed in the studied region for the last decades. This could be due both to an increased frequency of the events and to a larger availability of information: the analysis carried out indicates that the latter factor is probably the most influencing. The importance of factors, which affect the collection of data, including the conservation of documents and the presence and fragility of the elements at risk, is stressed in view of a wise use of historical data on debris flows.     

低频泥石流特征及防治 --以四川汶川县茶园沟为例

低频泥石流指30a以上发生1次的泥石流。尽管发生频率很低，但由于自身的特征及人们认识上的原因，其造l戒的人员伤亡和财产损失却居各类泥石流之首。对低频泥石流的研究在预防和减轻泥石流灾害方面有着重要意义。文章以2003年8月9日发生在四川汶川县茶园沟的泥石流为蒯，采用形态调查法和称重法等方法确定了流量、流速及重度。分析了其物质来源及形成的自然和人为原因，探讨了低频泥石流的特征。针对低频泥石流的低频性、破坏性和隐蔽性特点，同时考虑到低频泥石流沟的防治受保护对象的重要程度及资金投入等因素的限制，提出了进行泥石流危险性分区、搞好小流域水土深持、普及泥石流防灾减灾知识及加强监测和预警预报等措施，这对减轻低频泥石流区的灾害有一定的借鉴意义。     

泥石流汇流槽可靠度分析

汇流槽是泥石流治理工程中常用的工程措施之一。文章基于汇流槽的倾倒破坏、滑移破坏及地基破坏模式，通过对汇流槽设计影响强烈的岩土参数、几何特征、荷载因素等敏感因子的求解方法及分布特征分析，从汇流槽的抗倾稳定、抗滑稳定和基底应力要求三方面建立极限状态方程。对于每个极限状态方程，在泰勒级数对非线性极限状态方程线性化后，运用一次二阶矩的理论，先假定失效点P^＊，求解出相应的均值和方差。然后根据可靠的定义，得到相应的可靠度指标，通过迭代法求解真正失效点的可靠度指标βi。最后根据3个状态方程相互独立的假定，得出整个结构的可靠度指标β。该方法在平川泥石流防治工程中得到了成功的运用。这对于可靠度设计方法在泥石流防治工程中的运用进行了有益的探讨。     

水气两相流系统K-S-P模型参数反演的最优估计

应用渗流力学和参数反演辨识最优化理论,建立了水气两相流控制方程,给出了控制两相流系统K-S-P模型参数之间的本构关系,并对其中的相关参数进行数值反演辨识,得出待求参数的最优估计值。对不同质地土壤的实验测试值进行对比分析,其结果吻合较好,验证了模型的适定性和可靠性,解决了实验数据处理以及结果对初值的敏感性问题,并且该数值方法可通过多组初值参数进行数值实验,结合实验结果来满足实际工程的需求。这不仅对非饱和带内污染物传输、气藏工程试井计算、填埋气体的释放以及挥发性有机污染物的去污分析中两相流数值计算提供基础,而且对K-S-P本构关系之间参数的确定提供了可靠的理论依据。     

应用PIV系统研究横流中近壁水平圆柱绕流旋涡特性

应用粒子图像测速(PIV)系统对横流中近壁水平圆柱绕流进行了试验研究。介绍了试验原理及装置,讨论了试验参数的选取和粒子的跟随性问题。分析了上游来流的流动特性,显示了亚临界雷诺数下间隙比为0.5时圆柱后尾流区旋涡产生、发展和消亡的动态过程,比较了时均流场和瞬时流场旋涡结构。对圆柱尾迹的旋涡脱落特性进行了分析,得出在试验条件下斯特劳哈尔数保持为常数0.2的结论。