抗拔桩设计方法

当地下水位较高时,地下车库等附属建筑物不得不对抗浮问题进行考虑,抗拔桩被越来越多的应用于工程中。依据工程实例对抗拔桩设计荷载条件、抗浮桩单桩承载力设计、抗浮桩桩身结构设计、群桩地基整体稳定性、单位面积抗浮力、抗拔桩抗裂分别进行了阐述,以及抗拔桩设计中应考虑的问题进行了论述。     

煤层气开发利用与辽宁能源环境

对辽宁省主要煤田煤层气赋有条件及开发利用现状和开发潜力进行了研究评价。同时对辽宁省煤层气市场与煤层气开发效益进行了分析,并提出了重点目标区和开发利用建议。     

甘肃北祁连山寒山金矿床控矿条件与成矿模式

通过对该矿床成矿地质背景、矿床地质特征、成矿标志及控矿因素等诸方面分析，指出成矿物质主要来源于下奥陶统岛弧钙碱性安山—英安质火山碎屑岩，矿体受多级断裂裂隙系统的控制，且主要定位于韧—脆性剪切带内的强片理化带中，成矿作用发生于碰撞造山作用挤压—伸展转变期，花岗闪长岩、闪长岩等造山期中酸性岩体侵位期间及其以后，深部岩浆房或中酸性侵入体主要为矿床形成提供了热驱动力，矿床成因类型属与火山岩有关的构造蚀变岩型金矿床。在此基础上，总结归纳了该矿床的成矿模式与综合找矿标志。     

山西奇村地热田资源评价

山西奇村地热田开采已有30年历史，从1988年大量开采地热水以来，使浅层热水生产井水温持续下降。本文建立了奇村地热田的概念模型，利用LUMPFIT软件，采用热田多孔抽水试验资料，对地热田在不同热水开采量下，地下水位降深及温度变化进行了预测，提出了合理的开采量，对地热田开采有重要指导意义。     

小秦岭金矿含金石英脉中石英晶体微形貌研究

利用微分干涉显微镜等手段对小秦岭金矿含金石英脉中不同成矿阶段的石英晶体微形貌进行了研究。石英晶体{101^-1}、{011^-1}、{101^-0}单形晶面上不同特征的微形貌对了解石英晶体的生长机理、生长速率、生长环境的变化及成矿溶液的过饱和度具有重要意义，同时也可提供成矿阶段划分及晶体生长时热力学条件的信息。     

地热回灌的发展现状

地热回灌是一种避免地热废水直接排放引起的热污染和化学污染的措施,并对维持热储压力,保证地热田的开采技术条件具有重要的作用。目前回灌已经成为世界范围内数十个重要的地热田生产运行中的一项日常工作,在美国、新西兰、冰岛、意大利、法国、日本、罗马尼亚、丹麦、菲律宾和萨尔瓦多等十多个国家得到了广泛的应用。在国内,北京、天津的地热回灌也已经有了良好的开端。回灌是地热田管理中最为复杂的一项技术,为了避免因回灌而引起热储冷却,需要进行回灌试验和示踪试验,并在回灌过程进行全面的监测工作。     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

场地条件对地震动相干函数的影响

本通过弹性半空间内位错源的数值解法研究了曲岩地震动相干函数，采用有限元方法分析了一些典型场地的地表地震动相干函数，两的对比结果表明：复杂场地对地震动相干函数的影响强烈。