泌阳凹陷南部陡坡带核桃园组沉积体系研究

对泌阳凹陷南部陡坡带古近系核桃园组砂层组沉积体系进行了研究,认为研究区核桃园组属扇三角洲-湖泊沉积体系。根据沉积环境和沉积物特征可划分为扇三角洲平原、扇三角洲前缘及前扇三角洲亚相,以三角洲前缘亚相为沉积主体。湖泊沉积体系可分为浅湖亚相、半深湖、深湖亚相。沉积物主要来源于平氏、杨桥南部。     

班公湖-怒江带、羌塘地块特提斯演化与成矿地质背景

早古生代—泥盆纪,研究区沉积环境以陆棚碎屑岩相和碳酸盐台地相为主,代表冈瓦纳大陆北缘和特提斯南侧的被动大陆边缘。石炭纪—二叠纪,本区进入特提斯南、北缘弧盆系统演化阶段,龙木错-双湖带北部、金沙江带南部和冈底斯带分别在石炭纪、二叠纪形成岩浆弧。中生代是特提斯南缘弧盆演化阶段,SSZ型蛇绿岩形成岩浆熔离型铬、镍、铂族金属矿床和热液型金矿。班公湖-怒江带特提斯在中侏罗世至早白垩世向南、北两侧俯冲并形成岩浆弧,该岩浆弧是重要的成矿带,形成斑岩铜矿、矽卡岩型磁铁矿和热液型多金属矿床。北羌塘东段侏罗纪弧后前陆盆地有利于形成沉积型、沉积-热液改造型和热液型铁、铜、锑、金矿床。晚白垩世碰撞作用主要与热液型矿床有关,分布范围较大,也可能存在晚白垩世至新生代碰撞阶段的斑岩铜矿。     

塔里木盆地下古生界烃源岩二次生烃范围研究

塔里木盆地是一个多旋回叠合盆地,下古生界烃源岩具有典型的二次生烃特征.当前关于二次生烃的研究集中在通过热模拟方法认识生烃机理和模式等方面,关于典型盆地二次生烃发生范围、分布规律、影响因素研究相对较少.本文在认识塔里木盆地构造背景和热演化规律的基础上,选取不同构造单元具有代表性的50余口井,利用Basin Mod 1D盆地模拟软件对多口井进行烃源岩成熟史模拟,结合现有的镜质体反射率数据,研究奥陶系和寒武系烃源岩是否存在二次生烃以及二次生烃发生时期和规律.综合分析单井模拟结果发现,奥陶系烃源岩二次生烃发生范围分布在沙雅隆起、卡塔克隆起中部和古城墟隆起西端,寒武系烃源岩二次生烃发生范围分布在沙雅隆起、巴楚隆起和卡塔克隆起中部.不同构造单元二次生烃开始的时间不同.二次生烃生烃史受盆地构造-热演化史控制,且对油气藏形成和分布有一定影响.     

Hillslope erosion measurement—a simple approach to a complex process

The measurement of hillslope erosion can be a difficult, costly and time‐consuming activity. Many techniques are available, ranging from using environmental tracers, to LiDAR. Erosion measurements using erosion pins are assessed and compared with regional scale erosion data, hillslope data obtained using ¹³⁷Cs and erosion modelling results. The pins produced erosion rates which are within the range determined using ¹³⁷Cs and model data but above that of regional denudation rates. Our findings demonstrate that inexpensive erosion pins can provide reliable data on hillslope erosion. © 2015 Commonwealth of Australia. Hydrological Processes © 2015 John Wiley & Sons Ltd.     

Slope stability analysis using evolutionary optimization techniques

Slope stability optimization, in the presence of a band of a weak layer between two strong layers, is accounted for in complicated geotechnical problems. Classical optimization algorithms are not suitable for solving such problems as they need a proper preliminary solution to converge to a valid result. Therefore, it is necessary to find a proper algorithm which is capable of finding the best global solution. Recently a lot of metaheuristic algorithms have been proposed which are able to evade local minima effectively. In this study four evolutionary algorithms, including well‐known and recent ones, such as genetic algorithm, differential evolution, evolutionary strategy and biogeography‐based optimization (BBO), are applied in slope stability analysis and their efficiencies are explored by three benchmark case studies. Result show BBO is the most efficient among these evolutionary algorithms and other proposed algorithms applied to this problem. Copyright © 2016 John Wiley & Sons, Ltd.     

Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

Low-temperature constraints on the Alpine thermal evolution of the Western Carpathian basement rock complexes

The Cretaceous to Palaeogene Alpine exhumation of previously buried Variscan basements is recorded in the southern portion of the Western Carpathians in the Gemeric and Veporic units. The Meso-Cenozoic collisional processes resulted in basement exhumation of the Tatric Unit from Palaeogene to Neogene times. According to zircon and apatite fission track data, the Gemeric Unit, an uppermost thick-skinned thrust sheet, cooled from depth levels of ∼10 up to 2.5 km (temperature interval of ∼250–60 °C) about 88–64 Ma ago, after the collapse of overlying Meliata-Turňa-Silica Mesozoic accretionary prism. The middle and lower thick-skinned thrust sheets, Veporic and Tatric units, cooled from the depths of ∼10 up to 2.5 km ∼110–40 Ma ago. The process was controlled by unroofing of footwall from beneath the Gemeric Unit. About 50–20 Ma ago, the internal zone of Tatric Unit gradually exhumed to depth of <2 km and some parts of the unit appeared at the surface level. However, the external zone of Tatric Unit was buried beneath the Eocene to Lower Miocene sedimentary successions and exhumed to the subsurface level at ∼21–8 Ma ago, as a result of oblique collision of the Western Carpathians with the European Platform.     

东昆仑花石峡北部上二叠统格曲组源区特征:来自碎屑组成和岩石地球化学的证据

东昆仑南缘上二叠统（乐平统）格曲组为一套由砾岩、砂岩和钙质泥岩构成的扇三角洲-浅海碳酸盐台地相沉积组合,记录了东昆仑造山带海西-印支过渡期构造演化过程,是解析该构造演化过程的理想对象。通过分析花石峡北坦地克借地区格曲组碎屑岩的碎屑组成与主量、微量和稀土元素特征,探讨了其物源区属性。结果显示,砂岩类型为长石砂岩和岩屑长石砂岩,石英、长石和岩屑平均含量分别为50.9%、36.8%、12.4%,长石以钾长石为主,岩屑和砾石成分复杂。砂岩的SiO₂、Al₂O₃、TiO₂、TFe₂O₃、MgO、K₂O和Na₂O平均百分含量分别为62.06%、13.26%、0.44%、4.53%、3.02%、2.42%和3.18%;微量元素比值Th/Sc和Th/U较高,平均为1.06和7.71;稀土元素总量∑REE平均120.43×10-6,LREE/HREE和（La/Yb）_N均值分别为9.34和12,轻稀土相对富集,δEu平均为0.96,Eu异常不明显,REE特征与大陆岛弧背景区杂砂岩相似,与东昆仑地体加里东期俯冲-碰撞型火山弧花岗岩具有亲缘性。碎屑组分和主量、微量元素特征与判别图解揭示,格曲组砂岩物源区为海西旋回早期从东昆仑地体裂离的东昆南微地块,源岩以花岗岩为主,变质岩、沉积岩和酸性-基性火山岩较少,其中花岗岩形成构造背景为加里东期的大陆岛弧。结合区域地质和前人研究成果,认为格曲组为前陆盆地系统的隆后盆地沉积。     

矿床成矿系列——五论矿床的成矿系列问题

矿床的成矿系列(简称成矿系列)是矿床学领域的一个理论性概念,由五级序次组成。矿床成矿系列是成矿系列的第二序次,是成矿系列的核心部分。矿床成矿系列的划分,以岩浆、沉积、变质、表生和流体(非岩浆-非变质成因流体)5种成矿作用为基本原则,以成矿地质环境为基础,结合成矿的时段与形成的矿床组合进行划分。本文对矿床成矿系列时空范围、时空组成结构、矿化强度与演化、成矿区带内不同矿床成矿系列之间的演化、叠加和复合作用及对指导找矿的意义进行了论述。     

大凌河河口地区晚更新世晚期以来的沉积环境演化

对大凌河河口地区ZK3钻孔(孔深36.7 m)岩心开展粒度分析、AMS14C年代测定、有孔虫鉴定分析等综合研究,同时结合该地区5口工程钻孔的岩心以及部分测年资料,初步建立了大凌河河口地区晚更新世晚期以来典型的地层序列格架和时空对比框架,揭示该地区晚更新世晚期以来河道-湖沼-滨海/河口湾-浅海-三角洲的沉积演化过程。研究结果表明:大凌河河口地区在8 500 cal a BP前后开始接受海相沉积,并约在4 000 cal a BP之后进入三角洲沉积阶段;晚更新世晚期以来的海平面变化是大凌河河口沉积演化和沉积环境演变的主要控制因素;大凌河对现代辽河三角洲的形成和演化过程可能有较重要的影响。