From water to tillage erosion dominated landform evolution

While water and wind erosion are still considered to be the dominant soil erosion processes on agricultural land, there is growing recognition that tillage erosion plays an important role in the redistribution of soil on agricultural land. In this study, we examined soil redistribution rates and patterns for an agricultural field in the Belgian loess belt. ¹³⁷Cs derived soil erosion rates have been confronted with historical patterns of soil erosion based on soil profile truncation. This allowed an assessment of historical and contemporary landform evolution on agricultural land and its interpretation in relation to the dominant geomorphic process. The results clearly show that an important shift in the relative contribution of tillage and water erosion to total soil redistribution on agricultural land has occurred during recent decades. Historical soil redistribution is dominated by high losses on steep midslope positions and concavities as a result of water erosion, leading to landscape incision and steepening of the topography. In contrast, contemporary soil redistribution is dominated by high losses on convex upperslopes and infilling of slope and valley concavities as a result of tillage, resulting in topographic flattening. This shift must be attributed to the increased mechanization of agriculture during recent decades. This study shows that the typical topographical dependency of soil redistribution processes and their spatial interactions must be accounted for when assessing landform and soil profile evolution.     

珠江口盆地白云凹陷新生代构造演化动力学

白云凹陷构造演化史的研究对在白云凹陷开展油气勘探和深水沉积研究具有重要的意义。通过对断裂与沉积结构平面和剖面特点的分析,结合岩浆活动特点,文中提出白云凹陷是一个复式地堑,推测这种结构特点与凹陷下地壳的强烈韧性减薄和颈缩变形有关,表现为热岩石圈的伸展。其发育机制推测与白云凹陷位于构造转换带上有关,特殊的构造位置使白云凹陷成为强烈构造变形区,岩石圈地壳强烈减薄,伴随伸展过程和地幔上涌,脆性地壳或上地幔中部分熔融物质的出现导致岩石圈强度的急剧降低,在区域伸展应力场下以韧性流变方式减薄。岩浆在构造转换带下聚集并发育主岩浆房,由于白云凹陷南北边缘没有发育正断裂系统,岩浆主要沿垂直伸展的方向运移,因此在珠琼运动一幕和二幕南南东向伸展应力作用下,岩浆向白云凹陷的东部和西部运移至北西向基底深大断裂处,那里由于北西向断裂表现为左行张剪性质而成为压力较低的地区,从而成为岩浆上涌和侵位的地方。在岩浆聚集的地区,活动岩浆体附近的脆性变形被分散的韧性变形所取代,因此在凹陷的东北和西南两个角上,发育了张性和张剪性小断裂群,由于热岩石圈弹性较差,白云凹陷长期持续沉降。白云凹陷的断裂活动和沉积演化史还受到南海海盆扩张活动的影响。     

Foraminifera in Cenozoic Paleoenvironments

INTRODUCTION Microfossilsaregenerallythemostversatileand “useful”offossilsforbothcorrelationandagedeter minationandpaleoenvironmentalanalysis.Among microfossilstheforaminiferaarepre eminent(Fig. 1).Wefindinthesamesample—beitoutcropor subsurface,onshor…     

The post-glacial landscape evolution of the North German Basin: morphology, neotectonics and crustal deformation

The recent evolution of the north German Basin (NGB), which is presently a low-seismic area, was partly affected by glacial loading and unloading of the ice masses. Major stresses acting within the NGB are induced by the North-Atlantic ridge push, the ongoing Alpine collision, and the post-glacial rebound of Fennoscandia. Present-day horizontal stresses within the NGB are directed generally NW–SE, but fan and bend north of 52°N towards NNE. Major basement faults are directed NW–SE, minor faults NE–SW and NNE–SSW, and are clearly detectable in geomorphological and satellite lineaments. Furthermore, the drainage pattern and the distribution of lakes in northern Germany follow exactly block boundaries and, hence, mark zones of present-day subsidence. The understanding of the post-glacial morphology and reactivation of faults requires a view into the very heterogeneous crust and upper mantle below the NGB. The re-adjustment of the individual fault blocks during post-glacial relaxation of the lithosphere leads to differential, crust-dependent uplift and, probably, to the formation of Urstrom valleys. The Urstrom valleys and terminal moraines in northern Germany appear to parallel the major tectonic lineaments and lithospheric “block” boundaries. The lithospheric memory is expressed in the post-glacial landscape evolution of the NGB.     

秦末以来秦都咸阳地貌演变

秦都咸阳地貌演变研究是秦咸阳考古和关中地区历史环境演变研究不容忽视的问题。秦末以来，秦都咸阳地貌演变包括渭河河道北移和咸阳原边坡地貌变化两个方面。通过文献考证与实地考察恢复了秦末、唐、明、清各代渭河的河道位置，秦末以来秦都咸阳段渭河河道北移4100m，平均北移速度1．8764m／a，明代以前北移较慢，以后北移速度显著加快，清顺治至现代北移速度达到5．9701m／a。咸阳原南侧边坡上的中小切沟主要是秦以后形成的。原坡上的村庄平台是历史上人为斩齐原坡，挖掘窑洞，引起原边逐步后退的结果，是咸阳原边坡人为地貌演变的体现。     

Hillslope erosion measurement—a simple approach to a complex process

The measurement of hillslope erosion can be a difficult, costly and time‐consuming activity. Many techniques are available, ranging from using environmental tracers, to LiDAR. Erosion measurements using erosion pins are assessed and compared with regional scale erosion data, hillslope data obtained using ¹³⁷Cs and erosion modelling results. The pins produced erosion rates which are within the range determined using ¹³⁷Cs and model data but above that of regional denudation rates. Our findings demonstrate that inexpensive erosion pins can provide reliable data on hillslope erosion. © 2015 Commonwealth of Australia. Hydrological Processes © 2015 John Wiley & Sons Ltd.     

Slope stability analysis using evolutionary optimization techniques

Slope stability optimization, in the presence of a band of a weak layer between two strong layers, is accounted for in complicated geotechnical problems. Classical optimization algorithms are not suitable for solving such problems as they need a proper preliminary solution to converge to a valid result. Therefore, it is necessary to find a proper algorithm which is capable of finding the best global solution. Recently a lot of metaheuristic algorithms have been proposed which are able to evade local minima effectively. In this study four evolutionary algorithms, including well‐known and recent ones, such as genetic algorithm, differential evolution, evolutionary strategy and biogeography‐based optimization (BBO), are applied in slope stability analysis and their efficiencies are explored by three benchmark case studies. Result show BBO is the most efficient among these evolutionary algorithms and other proposed algorithms applied to this problem. Copyright © 2016 John Wiley & Sons, Ltd.     

Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

Low-temperature constraints on the Alpine thermal evolution of the Western Carpathian basement rock complexes

The Cretaceous to Palaeogene Alpine exhumation of previously buried Variscan basements is recorded in the southern portion of the Western Carpathians in the Gemeric and Veporic units. The Meso-Cenozoic collisional processes resulted in basement exhumation of the Tatric Unit from Palaeogene to Neogene times. According to zircon and apatite fission track data, the Gemeric Unit, an uppermost thick-skinned thrust sheet, cooled from depth levels of ∼10 up to 2.5 km (temperature interval of ∼250–60 °C) about 88–64 Ma ago, after the collapse of overlying Meliata-Turňa-Silica Mesozoic accretionary prism. The middle and lower thick-skinned thrust sheets, Veporic and Tatric units, cooled from the depths of ∼10 up to 2.5 km ∼110–40 Ma ago. The process was controlled by unroofing of footwall from beneath the Gemeric Unit. About 50–20 Ma ago, the internal zone of Tatric Unit gradually exhumed to depth of <2 km and some parts of the unit appeared at the surface level. However, the external zone of Tatric Unit was buried beneath the Eocene to Lower Miocene sedimentary successions and exhumed to the subsurface level at ∼21–8 Ma ago, as a result of oblique collision of the Western Carpathians with the European Platform.     

四川盆地西南部第三纪盆地原型及其演化

第三纪是四川盆地大范围陆相沉积历史的最后阶段, 同时又是四川盆地重要的构造定形期.探究该时期原型盆地沉积充填规律与构造演化特征, 是揭示四川盆地形成演化过程, 还原其古地理、古气候演变的关键.在综合利用古地磁、地震、野外露头等资料的基础之上, 从盆-山结合的角度出发, 以地质历史时间为主要线索, 对第三纪原型盆地分阶段、分区域地进行了动态化分析研究.重建了各沉积时期原型盆地构造-古地理格局, 分析了盆地沉积充填规律并复原了不同阶段沉积相带的空间展布特征.主要受周缘山系逆冲推覆作用产生的构造负载和盆地基底构造的影响, 第三纪时期四川盆地沉积范围局限于西南部、南部地区, 以河、湖沉积环境为主, 处于持续地挤压、充填过程而具有萎缩消亡的趋势.现今残余第三系地层由老到新, 主要由名山组、芦山组、大邑砾岩组等地层组成(先后经历了: 受造山带挤压推覆作用和温暖干旱气候等因素影响, 发育湖盆边缘冲积扇和沙漠沉积环境, 处于快速沉降阶段的名山组沉积时期; 以及构造活动相对稳定, 湖盆面积不断减小, 以沙泥质沉积互层为特征的芦山组沉积时期; 和沿山前带由南向北迁移, 以发育大型冲积扇为特征的大邑砾岩组沉积时期).纵观整个第三纪构造演化历史, 反映出四川盆地西南部地区在第三纪时期表现为典型的陆内坳陷沉积盆地性质.同期的大地构造活动和气候变化等因素对原型盆地的形成与演化起到了重要的控制作用, 同时也对该时期盆地古地理格局和沉积充填规律产生了重要影响.