陕西泾阳南塬滑坡干湿黄土快速大剪切力学特性

借助于先进的多功能大型高速高压环剪试验机,针对陕西泾阳南塬滑坡中的饱和黄土、干燥黄土在快速大剪切位移条件下的力学响应特性进行了环剪试验研究。研究结果表明:1)在相同试验条件下,与干燥状态黄土相比,泾阳南塬黄土在饱和条件下抗剪强度指标降低。2)在连续快速剪切条件下,泾阳南塬滑坡饱和与干燥黄土均表现出应变软化特征,饱和黄土比干燥黄土的软化特征更加显著。3)在相同法向应力条件下,剪切速率对饱和和干燥黄土峰值强度均有显著影响,但两种状态下土体峰值强度随剪切速率变化特征不同。饱和黄土峰值强度随剪切速率的增大而增大,而干燥黄土峰值强度随剪切速率的增大而减小。4)在不同含水状态下,泾阳南塬滑坡黄土剪切力学特性变化规律具有不同的产生机理。其中,干燥黄土抗剪强度在连续剪切过程中主要受黏土颗粒间摩擦(阻)力、颗粒运移与定向排列以及剪切面形态的控制。与干燥黄土相比,饱和黄土峰值抗剪强度变化主要受土黏聚力的控制并受水的影响;土体内水的作用能够加剧其应变软化程度并可形成光滑平整的剪切面形态,进而对其峰后剪切应力变化产生影响。     

Inverse modelling of aquifer parameters in basaltic rock with the help of pumping test method using MODFLOW software

The origin and movement of groundwater are the fundamental questions that address both the temporal and spatial aspects of ground water run and water supply related issues in hydrological systems. As groundwater flows through an aquifer, its composition and temperature may variation dependent on the aquifer condition through which it flows. Thus, hydrologic investigations can also provide useful information about the subsurface geology of a region. But because such studies investigate processes that follow under the Earth's shallow, obtaining the information necessary to answer these questions is not continuously easy. Springs, which discharge groundwater table directly, afford to study subsurface hydrogeological processes.The present study of estimation of aquifer factors such as transmissivity (T) and storativity (S) are vital for the evaluation of groundwater resources. There are several methods to estimate the accurate aquifer parameters (i.e. hydrograph analysis, pumping test, etc.). In initial days, these parameters are projected either by means of in-situ test or execution test on aquifer well samples carried in the laboratory. The simultaneous information on the hydraulic behavior of the well (borehole) that provides on this method, the reservoir and the reservoir boundaries, are important for efficient aquifer and well data management and analysis. The most common in-situ test is pumping test performed on wells, which involves the measurement of the fall and increase of groundwater level with respect to time. The alteration in groundwater level (drawdown/recovery) is caused due to pumping of water from the well. Theis (1935) was first to propose method to evaluate aquifer parameters from the pumping test on a bore well in a confined aquifer. It is essential to know the transmissivity (T = Kb, where b is the aquifer thickness; pumping flow rate, Q = TW (dh/dl) flow through an aquifer) and storativity (confined aquifer: S = bS_s, unconfined: S = S_y), for the characterization of the aquifer parameters in an unknown area so as to predict the rate of drawdown of the groundwater table/potentiometric surface throughout the pumping test of an aquifer. The determination of aquifer's parameters is an important basis for groundwater resources evaluation, numerical simulation, development and protection as well as scientific management. For determining aquifer's parameters, pumping test is a main method. A case study shows that these techniques have been fast speed and high correctness. The results of parameter's determination are optimized so that it has important applied value for scientific research and geology engineering preparation.     

The need for judgement in geotechnical reliability studies

ABSTRACT

A core principle of geotechnical engineering practice is the need to exercise judgement in evaluating soil and site conditions and in performing analyses. The requirement for considering judgement applies equally to performing deterministic or probabilistic analyses. In addition, for probabilistic analyses, choices must be made among the possible methods of analysis and the method of characterising variables. Consequently, geotechnical reliability studies inevitably involve significant uncertainties, and judgement is needed to perform reliability analyses and to evaluate the results. Two case histories, briefly described here, show that judgement and experience are essential prerequisites for meaningful assessment of geotechnical reliability.     

水平单轴应力与横波反射系数

地球物理勘探中,地下应力的估测是非常重要的.本文利用应力诱导的弱各向异性的各向异性参数,借助已有的具有水平对称轴横向各向同性介质顾及高阶小量的横波反射系数近似公式,针对下介质为各向同性受单轴应力作用情况随应力的增加求取应力精度降低的问题,从横波反射系数近似公式的推导出发,联合SH波与SV波反射系数给出新的改进的单轴应力与横波反射系数的直观表达式;计算并对比了受单轴应力作用的各向同性介质的横波近似和严格的反射系数,并利用理论得到的横波反射系数对应力进行了估值.结果表明,利用改进后横波反射系数与应力的直观表达式,当应力增加时,应力估值精度有了明显的改善,这为利用横波反射数据直观估测应力提供理论依据.     

一种新型海底沉积物声学原位测量系统的研制及应用

为了能够精确地测量海底表层沉积物的声学参数,自主研制了一种新型海底沉积物声学原位测量系统,与国内外传统的声学原位测量系统相比,该系统能够实时显示声波波形,调整测量参数,其工作方式除了站位式测量之外,还实现了拖行式连续测量,极大地提高了工作效率.根据前期海试情况,对海底仪器结构进行了重新设计,使之可以同时测量海底沉积物及海底海水的声学参数,同时建立了双向数字信道,解决了测量过程中系统信号的干扰问题.该系统的结构分为两部分:甲板控制单元和水下测量单元,整套系统通过主机控制程序进行控制,采用GPS定位系统测定仪器的大地坐标.为了检验系统的稳定性及准确性,分别进行了实验室水槽实验和海上试验.利用水声测量设备对测量系统进行实验室水槽标定分析,实验结果表明系统测量值相对误差仅为0.04%,测量结果具有较高的精度.海上试验在青岛胶州湾和东海海域进行,获得了试验区域海底沉积物声速和声衰减系数的测量数据,将测量数据与他人的研究结果进行对比分析,结果表明测量数据与前人研究结果一致,较为准确.该原位测量系统在站位式测量和拖行式测量中都能够快速准确地测量出沉积物声速和声衰减系数,可以作为海底底质声学测量的调查设备.     

地震动参数速报仪的研制

在出现区域大震后,为了迅速展开有效的应急救援行动,需要及时准确了解烈度分布.目前震动图的获得有震后人工调查、震源参数计算、地震监测台网、地震烈度速报台网等几种方式,其中最有效的是在重点监护区建立烈度速报台网.但烈度速报台网建设往往沿用地震监测台网的模式,建设成本高、台站密度有限、实时数据传输量大.本文研制的地震动参数速报仪采用MEMS加速度计为测震传感器和ARM+Linux嵌入式计算机技术,具有体积小、成本小、功耗低、一体化、智能化的特点;其内置地震信息实时处理算法,能够自动判别地震事件并计算地震动参数;在实际应用中安装简便.通过大量密集布设这种小型仪器而组建的地震动参数速报网络,具有数据传输量小、分布式计算、组成的速报网络可靠性高、能够快速产出高分辨率的精细震动图等特点.     

多相离散随机介质模型及其探地雷达波场特征研究

沥青混凝土是由骨料、沥青胶浆、空气按照一定的体积百分比混合而成的多相非匀质混合物,其骨料、沥青胶浆和空气的体积不等、形状各异、介电特性不同、空间位置随机分布,具有明显的多相、离散、随机介质特征.本文基于随机介质模型理论,(1)测量与统计了介电常数在典型沥青混凝土芯样空间上的随机分布统计特征;(2)估算了沥青混凝土介质的自相关函数及其特征参数(自相关长度、自相关角度等),确定其随机介质类型;(3)提出了量化约束下的多相离散随机介质建模算法,以混合型椭圆自相关函数为基础,构建了不同粗糙度因子的多相离散随机介质模型;(4)构建了不同空隙率的多相离散随机介质模型,正演模拟与对比分析了探地雷达波在均匀介质、连续型随机介质和多相离散随机介质中的传播特征.结果表明:多相离散随机介质模型不仅描述了沥青混凝土的多相、离散与空间随机分布统计特征,而且进一步描述了其各组成物质体积百分比,能更全面、准确地描述沥青混凝土的介质特征,同时也为描述其他类似材料或介质提供了新的方法和途径;在多相离散随机介质模型中,探地雷达波散射强烈,随机、无序传播的散射波相互叠加干涉,形成了明显的随机扰动和"噪声",致使异常体反射波扭曲变形、不连续,降低了探地雷达回波的信噪比和分辨率.研究探地雷达波的随机扰动特征与多相离散随机介质模型参数之间的关系,将为定量评价多相离散随机介质的属性参数提供参考和帮助.     

A distributed parameter model of a frame pin‐supported wall structure

Many reinforced‐concrete frames collapse via a soft‐story mechanism during severe earthquakes. Such collapses are mainly attributed to concentrated deformation in a soft story. Deformation control is thus important in preventing collapse. The frame pin‐supported wall structure is a type of rocking structure that releases constraints at the bottom of the wall. Previous research has obtained good results for the deformation control of this type of structure. However, the interior forces and strength demands of the pin‐supported wall have not been systematically explored. In this paper, a distributed parameter model is developed to investigate the strength demand of the wall in a frame pin‐supported wall structure. In the model, the pin‐supported wall is simplified as a bending beam and the frame is simplified as a shear beam. The two beams are joined by distributed shear connectors, so that the shear force can be transferred at any location on the interface. The model can be solved using differential equations based on equilibrium and compatibility. The accuracy of the model is verified using SAP2000 (Computers and Structures Inc., Berkeley, CA, USA). Displacement distribution of the structure and distributions of the moment and shear force within the pin‐supported wall are obtained for two typical external force profiles. It is found that the pin‐supported wall can effectively reduce the drift concentration factor. Distributions of the displacement, moment, and shear force are closely correlated with the relative stiffness of the wall and frame. Finally, recommendations on the stiffness and strength of a pin‐supported wall are made. Copyright © 2015 John Wiley & Sons, Ltd.     

常量元素氧化物含量及其比值揭示的中晚全新世以来玛曲高原的环境演变

对玛曲高原具有代表性的黄土-古土壤-风成砂剖面(OL剖面)常量元素氧化物含量及其比值的地球化学特征分析表明:(1)常量元素氧化物总含量为91.93%且SiO₂(67.93%) >Al₂O₃(11.2%) >Fe₂O₃(3.97%) >CaO(3.76%)>K₂O(2.16%) >Na₂O(1.81%) >MgO(1.1%);(2)玛曲高原处于较弱的脱Ca、Na初级风化阶段,并伴有碳酸盐的淋失;(3)玛曲高原的气候经历了冷干-凉润-温湿-凉干的冷暖旋回。依据常量元素氧化物含量及其比值揭示的环境特征并结合¹⁴C测年将玛曲高原中晚全新世以来的环境演变划分为4.6 ka BP以前的风沙活动强烈期、4.6～4.3 ka BP的风沙活动较弱期、4.3～0.3 ka BP的固结成壤期和0.3 ka BP至今的风沙活动增强期4个阶段。     

基于Whittaker滤波的陕西省植被物候特征

运用Whittaker滤波重构MODIS NDVI时序数列,利用地理探测器对比滤波前后影像信噪比,采用动态阈值法获取2000-2012年陕西省植被的3个关键物候参数(返青期、枯黄期和生长周期),在此基础上分析了该区植被物候参数空间分布特征。结果表明:(1)Whittaker滤波能够平滑原始NDVI曲线,有效减少原始影像的噪声,提高影像辨识度,并且参数设置简单;(2)陕西省植被物候地区分异明显,不同气候区划类植被物候表现出中温带半干旱区-暖温带半干旱区-暖温带半湿润区-北亚热带湿润区的递变规律:返青期逐步提前,枯黄期逐步推迟;(3)植被物候受高程和纬度影响,并且纬度影响更显著。海拔每升高200 m,返青期推迟1.3 d,枯黄期提前0.6 d;纬度每升高0.5°,返青期推迟3.6 d,枯黄期提前1.2 d。