利用背景噪声成像技术反演陕西及邻区地壳剪切波速度结构

利用地震背景噪声层析成像技术处理陕西及邻区所布设的257个宽频带台站的连续背景噪声数据,采用基于射线追踪的面波频散直接反演方法获得陕西及邻区地壳(6～39 km)高分辨率剪切波速度结构。成像结果显示:(1)渭河盆地顶部形成于新生代,厚的沉积层造成其浅部显著的低速异常,盆地中、上地壳为低速结构。渭河盆地与南北两侧地质构造单元交界区域的下方存在高速与低速结合带,以及在块体间相互运动的作用下,在块体内部,特别是界带深部可能存在着物质与能量的强烈交换,为渭河盆地及邻区的地震孕育发生提供深部环境。(2)南鄂尔多斯块体并不是一个均匀的整体,块体地壳浅层东薄西厚的低速异常结构,可能与鄂尔多斯自显生宙以来的整体掀斜,以及晚白垩纪以来差异性整体抬升和受强烈而不均匀的剥蚀有关。块体中地壳速度比上地壳和下地壳较高。壳内不存在显著的低速体,说明壳内低速体并没有贯穿整个鄂尔多斯地块。我们推测南鄂尔多斯块体仍保留着稳定克拉通的属性,其地壳结构可能反映了克拉通早期形成时的结构特征,至今还未遭受明显改造。(3)秦岭造山带东,西深部结构存在显著差异,具有分段分区的特征。造山带中地壳速度较高,可能因在板块碰撞和造山过程中,下地壳物质被抬升进入中地壳,从而造成中地壳速度偏高。     

S-wave velocity structure in Tangshan earthquake region and its adjacent areas from joint inversion of receiver functions and surface wave dispersion*

Using the seismic records of 83 temporary and 17 permanent broadband seismic stations deployed in Tangshan earthquake region and its adjacent areas (39°N–41.5°N, 115.5°E–119.5°E), we conducted a nonlinear joint inversion of receiver functions and surface wave dispersion. We obtained some detailed information about the Tangshan earthquake region and its adjacent areas, including sedimentary thickness, Moho depth, and crustal and upper mantle S-wave velocity. Meanwhile, we also obtained the v_P/v_S structure along two sections across the Tangshan region. The results show that: (1) the Moho depth ranges from 30 km to 38 km, and it becomes shallower from Yanshan uplift area to North China basin; (2) the thickness of sedimentary layer ranges from 0 km to 3 km, and it thickens from Yanshan uplift region to North China basin; (3) the S-wave velocity structure shows that the velocity distribution of the upper crust has obvious correlation with the surface geological structure, while the velocity characteristics of the middle and lower crust are opposite to that of the upper crust. Compared with the upper crust, the heterogeneity of the middle and lower crust is more obvious; (4) the discontinuity of Moho on the two sides of Tangshan fault suggests that Tangshan fault cut the whole crust, and the low v_S and high v_P/v_S beneath the Tangshan earthquake region may reflect the invasion of mantle thermal material through Tangshan fault.     

面波频散与接收函数联合反演南北地震带北段壳幔速度结构

通过对南北地震带北段区域所布设的676个流动地震台站观测资料进行处理,联合反演面波频散与接收函数数据,获得了研究区内地壳厚度、沉积层厚度的分布情况以及地壳上地幔高分辨率S波速度结构成像结果.反演结果显示研究区地壳厚度从青藏高原东北缘向外总体逐渐变薄,秦岭造山带地壳厚度较同属青藏高原东北缘的北祁连块体明显减薄;鄂尔多斯盆地及河套盆地分布有非常厚的沉积层,阿拉善块体部分区域也有一定沉积层分布,沉积层与研究区内盆地位置较为一致;松潘—甘孜块体、北祁连造山带等青藏高原东北缘总体表现为S波低速异常;在中下地壳,松潘—甘孜块体下方的低速体比北祁连造山带下方的低速体S波速度值更小、分布深度更浅,更有可能对应于部分熔融的地壳;鄂尔多斯盆地在中下地壳以及上地幔内有着较大范围的高速异常一直延伸到120 km以下,而河套盆地地幔只在80 km以上部分有着高速异常的分布,此深度可能代表了河套盆地的岩石圈厚度,来自深部地幔的热物质上涌造成了该区域的岩石圈减薄;阿拉善块体在地壳和上地幔都表现出高低速共存的分布特征,暗示阿拉善块体西部岩石圈可能受青藏高原东北缘的挤压作用发生改造.     

一种基于层析成像技术提高浅地表面波勘探水平分辨率的方法

在高频面波方法中,水平分辨率是指水平方向上分辨异常体的能力.异常体在水平方向上的长度可用水平方向上横波速度的异常尺度来确定.面波多道分析（MASW）方法被广泛应用于浅地表横波速度结构的探测,然而该方法确定的横波速度是整个检波器排列的平均计算结果,因此水平分辨率较差.另外,采用共中心点（CMP）多次覆盖的方式采集数据亦增加了野外的工作量.我们在MASW方法的基础上,应用面波层析成像方法,提出一套提高面波勘探水平分辨率的完整方法的技术流程.首先,利用波场分离技术获得准确的基阶或高阶模式面波,采用相位扫描的互相关方法测量多道面波记录中任意两道之间的面波走时;然后根据面波层析成像方法,获得高分辨率的各目标网格内的纯路径相速度频散曲线;最后反演所有目标网格内的纯路径相速度频散曲线,得到研究区域的拟二维横波速度结构.这套方法具有一定的抗噪能力,理论上它可以准确地提取相邻两道之间面波的相速度频散曲线;同时由于该方法最少只需要1个排列就可以获得拟二维横波速度结构,因此它显著减小了野外工作量.理论模型和实际资料都证实了这套方法可有效提高面波勘探的水平分辨率.     

利用多种地震数据联合反演剪切波速度结构的可靠性检测

本文模拟使用青藏高原东南缘区域台网及国家台网的170个宽频台站基于背景噪声、天然地震面波、P波接收函数反演时的实际数据,对青藏高原东南缘假定的初始模型进行恢复,通过计算初始模型台站下方纯路径频散、提取各台站对间的瑞雷波频散曲线、计算理论接收函数以及反演剪切波速度结构来测试使用不同单项数据与联合使用多种数据反演对初始模型的恢复程度。结果表明,同时使用接收函数、基于噪声经验格林函数的群速度、相速度频散以及基于天然地震面波的相速度频散联合反演的剪切波速度结构,充分利用了几种数据的分辨率优势,清晰地分辨出中下地壳及上地幔顶部的低速层。此外,本文也分析了实际数据处理中出现的计算误差、随机噪声干扰对计算结果稳定性的影响。结果显示:对于面波频散,加入1%的误差后,联合反演的结果仍可很好地反映低速层的形态,但是当误差提升至5%后,对最终结果则产生了一定程度的影响;而在接收函数中加入4%的随机噪声时,虽然地幔低速层的上界面和下界面会略微受到随机噪声的影响,但是低速层的深度范围和速度值均得到了较好的恢复。     

DEMARCATION OF THE GEOMORPHOLOGICAL BOUNDARIES OF SOUTHEASTERN TIBET: IMPLICATIONS FOR EXPANSION MECHANISMS OF THE PLATEAU EDGE

The geomorphologic structure in the southeastern Tibetan Plateau is one of the important indexes for the expansion and deep dynamic process of Tibet. There are two different understandings for the geomorphologic structure in the southeastern Tibetan Plateau, i.e. gradual change and abrupt change. The gradient model suggests a gradual topographic reduction towards southeast which is an important evidence for the lower crust channel flow. The abrupt model considers that the southeast boundary of the plateau shows an abrupt change of topography in a zone of 50~200km wide which is controlled by the Yarlung-Yulong fault system. Here, we describe the morphotectonic feature in detail of the Sichuan-Yunnan block on the southeast edge of the plateau through the digital elevation model(DEM)analysis, further review the structural controls on the geomorphologic structure by combining the tectono-thermochronology analysis, and evaluate the southeastward spreading mode of the plateau. The topographic arithmetic progression ranking by using the DEM of the Sichuan-Yunnan block reveals three geomorphologic steps gradually lowering from the northwest to southeast. The switching of hypsometric integral(HI)value and the anomaly of SL/K value(where SL is stream length-gradient index and K is altitude of the profile)of river systems all occur on the edge of terraces. The high terrace is located on the north of Muli-Yulong with average elevation~4 200m; the secondary level of terrace extends to the Yanyuan-Lijiang area with average elevation~3 000m; and the third level is the region between the Jinhe-Qinghe and Anninghe with average elevation~1 800m. Structure investigation reveals that all the topographic boundaries between different terraces are consistent with regional major faults. The Muli thrust fault and Yulong thrust fault control the southeast edge of the high terrace, the Jinhe-Qinghe thrust fault separates the second and third level of terrace. The coincidence between topography boundaries and faults suggests that the formation of the stepped geomorphology on the southeast edge of the plateau were induced by the fault activities, reflecting the fault-controlled southeastward stepped-expanding mode of the plateau. The fission-track(FT)dating of the granites at the hanging wall of the Yuling-Muli Fault reveals fast uplift during~27~22Ma BP, reflecting the major thrusting along the Yulong-Muli Fault, which is consistent with the early-stage activity (~30~25Ma BP) of the Longmenshan Fault. Therefore, the high terrace was formed during the Oligocene to early Miocene with the thrusting of the Yulong-Muli Fault. Tectono-thermochronology analysis also reveals the major thrusting of the Jinhe-Qinghe Fault occurred during~18~11Ma BP, indicating the middle terrace was formed in the middle Miocene, which also could correspond to the middle Miocene(~15~10Ma BP) activity of the Longmenshan Fault. Therefore, the thrusting faults controlled stepped terrace geomorphologic structure and the stepwise expanding mode under combined movements of large-scale thrusts and strike-slip faults at the southeast edge of Tibetan Plateau during the late Cenozoic do not support the lower crust channel flow model.     

HTI煤层介质槽波波场与频散特征初步研究

煤层内裂隙较为发育,具有明显的各向异性.目前槽波理论研究以各向同性介质为主,对HTI介质中槽波及其频散性质研究很少.本文以弱各向异性、含垂直裂隙HTI煤层介质为研究对象,研究了HTI煤层介质中的三维槽波波场,采用交错网格高阶有限差分法模拟槽波,推导了三层水平层状HTI煤层介质的Love型槽波理论频散公式和振幅深度分布,分析了HTI各弹性参数对频散曲线的影响.HTI介质和各向同性介质基阶Love槽波频散曲线差异较小,高阶较大;煤厚主要影响Airy相频率,而Airy相速度不变;煤层vs对Airy相速度影响很大;煤层γ对基阶Love槽波影响很小,高阶稍大.各波偏振方向不再与波的传播方向平行或垂直,而是呈一定夹角.利用基阶Love槽波频散曲线推测裂隙发育较为困难,可利用高阶频散曲线.     

Hidden in plain sight: How finding a lake in the Brazilian Pantanal improves understanding of wetland hydrogeomorphology

Wetlands are permanently or seasonally flooded areas which support countless species of plants and animals. The Pantanal, in central-west Brazil is one of the largest freshwater wetlands in the world covering an area of ~150 000 km². The relationships between geomorphology, hydrology, sedimentation, and vegetation cover are critical for understanding how the landscape constrains the dynamics of wetlands. We provide a detailed study of the geomorphology and surface hydrology of the Negro River Interfan System (NRIS), in the southern Pantanal, by applying multiple approaches (i.e. remote sensing analysis, geomorphological zonation and hydrosedimentological surveys). A multitemporal analysis of Landsat imagery produced an inundation frequency map (2000–2011 period) that revealed a permanently flooded area in the central portion of the NRIS. A hidden fluvial lake was previously undetected due to the accumulation of floating mats and floating meadows of macrophytes. The Negro and Aquidauana feeder rivers exhibit remarkable differences in channel planform, water discharge, and sediment load. The Negro River presents a distributary pattern with marginal levees with decreasing elevation as it progrades into the lake and remains as a subaqueous landform conditioning the water flow downstream. The lake outflow to the Paraguay River occurs mainly by sheet flow during flood seasons and through small tributary channels during dry months. The lake's geometry is outlined by east–northeast and west–northwest straight borders, suggesting that the area is tectonically controlled. A cloud-based worldwide water surface database (1984–2015) revealed frequent channel changes within the NRIS. Recent channel avulsions in the lower course of the Negro River are noteworthy mainly because the former river channel at the confluence with the Paraguay River is no longer connected with the Negro River channel. © 2019 John Wiley & Sons, Ltd.     

森林沼泽区景观地球化学特征与勘查方法

对我国东北地区森林沼泽景观地球化学特征进行了研究,提出该类地区表生条件下元素迁移集散分布规律和对地球化学异常的一些影响因素.通过已知矿区找矿方法试验研究和找矿预测区示范性测量,制定出一套森林沼泽景观中大比例尺化探工作方法与异常查证评价技术.     

Wave dispersion studies in granular media by analytical and analytical–numerical methods

The phenomenon of wave dispersion in dry sand is studied both by purely analytical studies and by analytical–numerical experiments on the basis of gradient elastic and viscoelastic material models. These material models are employed in order to simulate the microstructural characteristics of dry sand. The analytical studies treat the material body as a one-dimensional (for the viscoelastic case) and three-dimensional (for the gradient elastic case) and for both material models provide explicit expressions for the velocity of propagation of harmonic compressional (P) and shear (S) waves. These velocities are found to be functions of frequency, i.e., dispersive. The analytical–numerical studies treat the material as a one-dimensional one and try to simulate P and S wave propagation along the axial direction of cylindrical dry sand specimens. Thus, a sinusoidal pulse with a specific frequency is applied at one end of the specimen and the response is determined at some other point by solving a transient dynamic boundary value problem with the aid of a numerical Laplace transform. This analytical–numerical experiment is repeated for various frequencies. Thus, one determines the velocities of P and S waves as functions of frequency, thereby proving again that wave propagation in dry sand is dispersive.