Laboratory measurement of hydrodynamic saline dispersion within a micro-fracture network induced in granite

We report the first measurements of hydrodynamic dispersion in a microfractured granite using a combination of novel techniques. A fracture network was induced in a cylindrical plug of Ailsa Craig micro-granite by thermal stressing, to produce an isotropic network of fractures with an average aperture of  0.3 μm, a density of approximately 4 × 10⁴ fractures/mm³ and a permeability of 5.5 × 10^− 17 m². After saturating the cores with 0.01 M NaCl solution a step in the concentration profile to 1 M was advected into the plug at flow rates of 0.07 to 2.13 cm³ h^− 1. The longitudinal electrical impedance of the plug was measured continuously as the solute front advected through its length until the plug was saturated with the concentrated electrolyte. Analysis of the impedance versus time relationships allows the derivation of the longitudinal dispersion coefficient, D_L, and hydrodynamic retardation, R_H. The Peclet number–dispersion relationship for the micro-fracture network is very similar to that predicted for other, radically different, fracture networks. Thus dispersion may be more dependent on fracture connectivity and length than fracture density and display a relationship similar to that shown by particle beds and clastic sandstones. The high retardation values observed (2.2–4.9) reflect flow behaviour within a fracture network with a proportion of ‘blind’ sections, and demonstrates how such networks can slow the advance of conservative solute components.     

Shear-wave Velocity Structure around Teide Volcano: Results Using Microtremors with the SPAC Method and Implications for Interpretation of Geodetic Results

Deformation analysis and simulation of volcanic edifices require the construction of models of elastic properties of those structures. In this paper we present an analysis of microtremor measurements recorded during the performance tests of two temporary seismic arrays installed in the eastern portion of the Teide caldera in 1994. We take advantage of recent developments of the SPAC method and use spatial cross-correlation computations to estimate phase velocity dispersion of Rayleigh waves at the location of the arrays. We show that the extension of the standard SPAC method is valid in the case of our data, justifying its use and supporting the generalization of the SPAC method to single station pairs. The phase velocity dispersion curve obtained was inverted to recover the shear-wave profile at the site of the arrays. Our results indicate that the subsoil structure of the caldera is laterally homogeneous at the scale of a few km about the location of the arrays. We obtained about 315 m of volcanic sediments overlying rocks with a shear-wave velocity of 2 km/s. These results are robust and are a starting point to further modelling of deformation, permanent or transient, at this volcanic edifice, which can be useful in the interpretation of different observed fields. In fact, the computation of deformations and gravity changes due to possible volcanic intrusions in two models; one considering the volcanic sediments and the other without considering them, provided different results in the near field.     

Spatial dispersion of surface waves at the free surface of a general anisotropic elastic medium

A new technique relates the wave velocity of the surface waves in anisotropic elastic medium to its elastic constants. Anisotropic propagation of surface waves is studied in a half-space occupied by a general anisotropic elastic solid. The phase velocity expressions of quasi-waves, in three-dimensional space, are used to derive the secular equation of surface waves. The complex secular equation is resolved, analytically, into real and imaginary parts and is then solved, numerically, for phase velocity along a given phase direction on the surface. The complete procedure is thus analogous to the one used for conventional Rayleigh waves in isotropic medium. A non-linear equation relates the ray direction of the surface waves to its phase direction on the (plane) surface of the medium. The analytical differentiation of secular equation yields the directional derivative of phase velocity. This derivative is used to calculate the wave velocity of surface waves. Spatial variations of phase velocity, wave velocity and ray direction over the free plane surface are plotted for the numerical models of crustal rocks with orthorhombic, monoclinic and triclinic anisotropies.     

Rockglacier activity studies on a regional scale: comparison of geomorphological mapping and photogrammetric monitoring

In their spatial distribution as well as in their different states of activity, rockglaciers imply important information on former and recent permafrost conditions. Two different methods were applied in one study area (Turtmann Valley, Swiss Alps) in order to compare their suitability in assessing rockglacier activity. The comparison of geomorphological mapping and photogrammetric monitoring demonstrated a good accordance, especially on a regional scale. On a local scale, some differences in delimitation of the landforms as well as in the degree of activity were found. One reason for the observed differences is the qualitative character of geomorphological mapping resulting from the variable suitability of single parameters and combinations thereof in the determination of rockglacier activity. Based on these results, geomorphological mapping of rockglaciers can be improved by data from photogrammetric monitoring. Therefore, at best the two methods are combined when analysing former and present permafrost distribution. Copyright © 2007 John Wiley & Sons, Ltd.     

瑞雷面波频散特征的时频分析方法及应用

在非平稳信号的处理中,信号在任一时刻附近的频域特征都很重要,而时频分析就是处理非平稳信号的重要工具。瑞雷面波在传播过程中发生频散,属于典型的非平稳信号。这里用时窗长度为分析频率分量周期五倍的改进短时傅里叶变换,对面波信号进行分析,得到其时频谱图。瑞雷面波的时频谱图反映出面波中各个频率成份到达接收点的时间,由此可计算出各个单色波的相速度,从而求出面波的频散曲线。根据相速度、频率、波长的关系,最终能够求出工程中常用的速度-深度图。     

Occurrence of Free-Gas Associated with Methane-Hydrate-Bearing Formations in the MITI Nankai Trough Wells, Offshore Tokai, Japan

Abstract. The MITI Nankai Trough wells were drilled for exploration of methane-hydrate-bearing sediments in association with seismic inferred bottom simulating reflectors (BSRs). In this project, log data showed low velocity compressional-wave (P-wave) layers below methane-hydrate-bearing formations. Dipole shear sonic acoustic tools (DSI) could not acquire accurate compres-sional velocity in this zone, thus it was not possible to accurately correlate between logging, VSP and surface seismic profiles.
Small amount of gas was presumed to cause the problem in obtaining the low velocity P-wave data. VSP interval velocity data was used to assess the DSI inferred low-velocity layer, which showed lower values than the velocity of the drilling muds. Synthetic seismogram was created by VSP-compensated velocity to compare against corridor stack of VSP. As a result, the depths above and below the methane-hydrate-bearing interval were correlated with synthetic seismograms and reflectivity events on the VSP profiles. By using this correlation technique, distribution of methane-hydrate-bearing formations and free-gas-bearing formations can be determined.     

能量频散对台风结构和移动的作用

本文用双Ｆｏｕｒｉｅｒ展开的解析方法和β平面准地转正压模式数值试验的方法，研究了台风涡旋能量频散及其对台风路径的影响问题。解析与数值试验的结果一致地表明，由于能量频散，在台风中心以东方向形成了一个低－高－低值系统的波列。三组数值试验的结果表明，波列中的高值系统对台风的结构和移行具有明显的影响。     

The integral of the semivariogram: A powerful method for adjusting the semivariogram in geostatistics

A good fining of the structural junction that describes the variability of a spatial phenomenon is an essential stage in the building of an accurate estimator by kriging. The technique of the integral of the semivariogram (ISV) makes it possible to find this structural function while overcoming the problem of grouping together the pairs of experimental points into classes of distances when the data are not sampled on a regular grid. The ISV is particularly useful when the dispersion of the values of the classical Semivariogram (SV) makes it difficult to fit a model. Since the ISV is composed of a large number of values, it is more continuous than a SV and therefore easier to fit analytically. In fact, when the general shape of the SV is known, the ISV method proves its worth in finding the parameters that best fit a given variogram model. The analytical models of ISV which will be used, are the integral expressions of the traditional analytical SV. In this paper and on the basis of hydrogeological examples, we propose a method to adjust all the parameters of each model. The first derivative of a filled ISV, used in the kriging equations, appears to be systematically the best SV for a cross-validation on the data. This is why we think that the ISV technique should be used when the strong spatial variability of a parameter spreads out the values of the experimental SV.     

矿物中的位错花样及成因动力学机理初探

运用Ｗａｌｇｒａｅｆ－Ａｉｆａｎｔｉｓ的反应扩散动力学分析模型，讨论了位错花样这种典型耗散结构系统的形成，失稳及其特性，探讨了矿物中的位错花样及成因，指出了今后研究的方向。