湘中雪家坡脆韧性剪切构造岩地球化学特征

在１∶５万黄材幅区调中，对脆韧性剪切构造岩进行的岩石化学、微量元素、稀土元素研究表明，由中细粒含斑二云母二长花岗岩改造为糜棱岩化花岗岩、初糜棱岩、绢云母糜棱岩、硅化糜棱岩、千糜岩、糜棱片岩等，其化学成分发生了不同程度的改变。化学元素的分散、聚集或不变，既受原岩控制（继承性），又受变形强度和流体的成分、性质、活动性等控制（变化性）。     

相山铀矿田成矿作用的地球化学模拟

相山铀矿田是我国最大的火山岩型热液铀矿田，在地质地球化学和高温高压实研究的基础上，利用地球化学模式程序ＥＱ３／６模拟了成矿热水溶液的形成过程和减压排泄区铀成矿作用。计算机模拟结果表明，通过大气降水与碎斑熔岩相互作用，可以形成富含Ｆ和ＳｉＯ２等矿化剂的含铀热水溶液；由于铀以ＵＯ２Ｆ＾３和ＵＯ２（ＣＯ３（＾２－３等配合形式存在，非常稳定，即使在深部强还原环境中仍能能够迁移；酸性和碱性环境，尤其是强酸性     

泌阳碱矿形成的地球化学模拟研究

泌阳碱矿过去一直被认为是原生沉积矿床。通过综合分析泌阳凹陷的地质、石油地质、碱矿地质和水文地质条件，从不同方面论证泌阳碱矿不太可能属于原生沉积矿床。利用地球化学模拟技术，从理论上模拟了泌阳碱矿的形成过程，提出了一种水－岩相互作用成矿模式，并用大量的事实支持了这种观点。     

马山金（硫）矿床地球物理地球化学找矿模式

根据矿床的地球物理地球化学异常特征，磁异常与金矿体的关系，地球化学异常及其垂向分带规律，归纳出矿床地球物理地球化学找矿模式和找矿标志。     

北山戈壁荒漠景观1∶5万地球化学测量方法研究

通过在西北北山地区进行剖面和面积性方法试验,研制出了一套适合于西北荒漠戈壁景观条件的地球化学测量方法,即包括样品布局、采样密度、样品介质、样品粒级以及不同类型的地球化学测量方法技术。试验结果证实,每平方千米采集>20目的沟谷粗碎屑介质样品,能够圈定出清晰的矿化异常,而且异常元素组合齐全,指示意义明确,较准确地反映了矿体或矿化体的形态和延伸方向。同时辅助采集植物———红莎样品和<80目细粒级样品(提供热释汞分析),可以提取掩埋矿化体的信息。     

区域化探数据处理的几种分形方法

地球化学变量兼有随机性、确定性和区域结构性的特征，传统的数学方法难以精确地描述地球化学变量的空间分布规律，而新兴的分形几何是刻画空间不规则形体的一种比较有效的工具，且分维值可以表征空间不规则形体的确定性本质。基于分形原理，提出含量-总量法、空间分形插值法和分形趋势面法3种新的分形技术，应用于区域化探数据处理。在几个典型矿区应用后发现，上述分形方法不仅可以有效地模拟地球化学变量的空间分布特征，而且在保留原始有效异常信息的基础上可以更合理地区分地球化学变量的背景与异常，具有发现和强化弱异常信息的重要功效。     

内蒙古渣尔泰山群和白云鄂博群中Pt、Pd地球化学特征及找矿建议

内蒙古渣尔泰山群和白云鄂博群是一套陆源碎屑岩、泥页岩、碳酸盐岩，地层中Pt、Pd的含量与原岩中泥质、有机碳、有机质的含量有关。其中渣尔泰山群中的阿古鲁沟组炭质板岩、增隆昌组硅质炭质板岩为含Pt、Pd最佳层位(岩性)，白云鄂博群中的比鲁特组干枚状板岩也为含Pt、Pd的最佳层位(岩性)。通过研究Pt、Pd的富集状况、存在形式、矿物学特征等，可查明渣尔泰山群、白云鄂博群中的含矿层位，以达到寻找铂、钯矿床的目的。     

区域化探找矿新案例-甘肃代家庄铅锌矿的发现

代家庄铅锌矿是在甘肃省用地球化学勘查方法发现的第一个大型铅锌矿床。作者回顾了发现该矿床的简史,研究了矿床地质、地球化学特征,探讨矿区进一步找矿的远景,讨论应用地球化学勘查方法寻找铅锌等有色金属矿产的经验和教训。     

Correlation of seismic activity and fumarole temperature at the Mt. Merapi volcano (Indonesia) in 2000

In this paper we present densely sampled fumarole temperature data, recorded continuously at a high-temperature fumarole of Mt. Merapi volcano (Indonesia). These temperature time series are correlated with continuous records of rainfall and seismic waveform data collected at the Indonesian–German multi-parameter monitoring network. The correlation analysis of fumarole temperature and precipitation data shows a clear influence of tropical rain events on fumarole temperature. In addition, there is some evidence that rainfall may influence seismicity rates, indicating interaction of meteoric water with the volcanic system. Knowledge about such interactions is important, as lava dome instabilities caused by heavy-precipitation events may result in pyroclastic flows. Apart from the strong external influences on fumarole temperature and seismicity rate, which may conceal smaller signals caused by volcanic degassing processes, the analysis of fumarole temperature and seismic data indicates a statistically significant correlation between a certain type of seismic activity and an increase in fumarole temperature. This certain type of seismic activity consists of a seismic cluster of several high-frequency transients and an ultra-long-period signal (<0.002 Hz), which are best observed using a broadband seismometer deployed at a distance of 600 m from the active lava dome. The corresponding change in fumarole temperature starts a few minutes after the ultra-long-period signal and simultaneously with the high-frequency seismic cluster. The change in fumarole temperature, an increase of 5 °C on average, resembles a smoothed step. Fifty-four occurrences of simultaneous high-frequency seismic cluster, ultra-long period signal and increase of fumarole temperature have been identified in the data set from August 2000 to January 2001. The observed signals appear to correspond to degassing processes in the summit region of Mt. Merapi.     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.