Kinematic interaction factors of deep foundations with inclined piles

The beneficial or detrimental role of battered piles on the dynamic response of piled foundations has not been yet fully elucidated. In order to shed more light on this aspect, kinematic interaction factors of deep foundations with inclined piles, are provided for single‐battered piles, as well as for 2 × 2 and 3 × 3 groups of piles subjected to vertically incident plane shear S waves. Piles are modelled as linear‐elastic Bernoulli beams, whereas soil is assumed to be a linear, isotropic, homogeneous viscoelastic half‐space. Different pile group configurations, pile‐soil stiffness ratios, and rake angles are considered. The relevance and main trends observed in the influence of the rake angle on the kinematic interaction factors of the analysed foundations are inferred from the presented results. An important dependence of the kinematic interaction factors on the rake angle is observed together with the existence of an inclination angle at which cap rotation and excitation become out of phase in the low‐to‐mid frequency range. The existence of a small batter angle that provides minimum cap rotation is also shown. Copyright © 2014 John Wiley & Sons, Ltd.     

煤矿长斜井TBM施工安全风险分析与趋势预测

对煤矿长斜井盾构机（tunnel boring machine,TBM）施工的风险因素进行了识别,建立了二层次的风险评估指标体系,并确定了风险等级分类标准,利用熵权法确定风险指标的权向量,进而建立了基于集对分析法的煤矿长斜井TBM施工同异反评估模型。在此基础上利用偏联系数的理论确定了文中五元偏联系数的计算方法,根据改进的集对势理论给出风险趋势的预测方法。利用该模型对台格庙矿区煤矿长斜井（1#、2#实验井）TBM施工风险进行了评估与趋势预测。研究表明该模型与方法在煤矿长斜井TBM施工风险分析中是有效的、实用的,可为煤矿长斜井TBM施工风险分析与预测提供一种新的途径。     

松软煤层井下泡沫钻进工艺试验

松软煤层瓦斯抽采孔的深孔施工技术在现有的钻进工艺下不能很好的满足要求。为了提高松软煤层钻进的时效和孔深,提出了煤矿井下松软煤层泡沫钻进工艺,并在淮北邹庄矿进行了现场试验。分析了3个试验孔的具体工况,提出了较为合理的解决方法,使钻孔深度达到了200 m。这不仅有效增加了在松软煤层中的成孔深度,提高了成孔率,还降低了孔口的粉尘污染。      

谢一矿小型层滑构造特征对煤厚变化影响分析

通过分析层滑构造的基本形式、分布特征和在煤层中的展现形态,指出层滑构造对煤层厚度变化的影响特征,对煤厚的变化做到定性和定量预测.     

大寒岭倒转背斜复杂煤层结构冲击地压研究

受大寒岭倒转背斜的影响,大安山煤矿14槽煤后槽形成了极为复杂的煤层结构,其轴部及附近和两翼形成的急倾斜煤层是高应力区,具有冲击倾向性。首先用ANSYS有限元软件建立了包括复杂煤层结构在内的矿山模型,利用单元生死技术模拟轴部及右翼开挖;在此基础上,分析了采场围岩的应力场和位移场,圈定了冲击地压发生的危险区域,分析了冲击地压发生的机理;预测了14槽煤后槽开采的冲击倾向性,并指出在实际开采时,必须采取防冲措施,为避免冲击地压事故的发生提供了技术支持,具有一定的参考价值。     

倾斜煤层底板破坏特征的微震监测

带压开采是承压水上采煤的主要方法,底板采动破坏深度的确定是实现带压开采的关键和前提。针对底板采动破坏深度现场测量方法的局限性,特别是倾斜煤层（煤层倾角在25°～45°之间）底板采动破坏深度的现场测量。以桃园煤矿1066工作面为例,利用高精度微震监测技术,对承压水上倾斜煤层底板的采动破坏特征进行了连续的、动态监测。监测结果表明：（1）工作面运输巷（下顺槽）附近的底板比工作面回风巷（上顺槽）附近的底板破坏深度更深,破坏范围更大;（2）倾斜煤层工作面底板破坏形态整体呈现为一个下大上小的非对称形态。根据微震监测结果,确定了1066工作面回风巷和运输巷附近底板的最大破坏深度,划分了倾斜煤层工作面底板突水危险区域。将微震监测的倾斜煤层底板破坏深度与经验公式计算的底板破坏深度进行了对比,指出了经验公式存在的不足     

Influence of shear angle on hangingwall deformation during tectonic inversion

Tectonic inversion is a common phenomenon in island arc settings, especially in back‐arc basins. The reactivation of normal faults as thrusts, triggered by tectonic inversion, produces typical inversion fault‐related folds and thrusts in the hangingwall. These hangingwall inversion geometries are affected by two factors: the geometry of the underlying master fault and the angle of inclined simple shear relative to the regional dip of strata, in the case that the deformation is approximated by simple shear. This study employed numerical simulations to analyse the influence of the antithetic shear angle on the geometry of the hangingwall and displacement along the master fault. The simulation results reveal that a steeply inclined shear vector during extension produces a narrow, steep‐sided half‐graben, whereas a gently inclined shear produces a wide, open basin. After tectonic inversion, a tight anticline is formed under steeply inclined shear, whereas an open anticline is formed under gently inclined shear. Antithetic shear results in reduced total displacement along the master fault, and the greater the angle between the shear direction and the regional dip, the greater the displacement along the master fault. Because the deformation geometry of syn‐extension layers is affected by extension followed by contraction, a change in the shear angle during tectonic inversion produces a wide variety of deformation geometries. Comparison of the simulation results with the results of analogue modelling suggests that the shear angle decreases by 5° during the transition from extension to tectonic inversion and that such a change may be commonly observed in natural geological structures. These results highlight the benefits of numerical simulations, which can be used to readily examine a variety of constraining parameters and thereby lead to a better understanding of the mechanism of hangingwall deformation, avoiding erroneous estimates of the amount of fault displacement.     

开采上保护层对巨厚砾岩诱发冲击矿压的减冲机制分析

为研究开采上保护层对巨厚砾岩断裂诱发冲击的防治作用,根据跃进煤矿25采区的地质条件和采掘条件,将25110工作面下巷作为研究对象,从理论上分析了动静载叠加诱发冲击矿压的机制以及开采上保护层后的防冲原理,数值模拟研究了未开采上保护时和开采上保护层后在同等强度的动载扰动应力的影响下巷道底板的位移、速度、应力以及塑性区的变化规律,进行相似模拟试验研究了人工震源的作用下未开采上保护时和开采上保护层后巷道底板的加速度和动应力响应规律。结果表明,上保护层开采后能够有效地释放围岩内部的高应力,且采空区顶板自然垮落,形成的软弱松散岩层结构,能够更好地起到对动载扰动应力波的衰减作用,从而降低了冲击矿压发生的可能,一定程度上能够较好地防治冲击矿压。研究成果对巨厚砾岩下冲击矿压的防治具有一定指导意义。     

基于断裂力学的特厚煤层综放开采顶板破断规律研究

针对特厚煤层综放开采过程中矿压显现剧烈支架工作阻力难以确定的问题,结合特厚煤层工作面顶板岩层破断形成的悬臂梁-砌体梁力学结构模型。工作面来压阶段支架工作阻力不足时,引起砌体梁结构下沉使悬臂梁结构回转变形破断,造成上覆砌体梁结构滑落失稳压架使工作面矿压显现剧烈的特点,建立了含中心斜裂纹的悬臂梁结构破断的力学模型,应用断裂力学理论,分析了悬臂梁破断失稳的影响因素,推导了支架荷载的表达式。结果表明：裂纹倾角和长度是悬臂梁破断失稳的主要影响因素;支架荷载除与悬臂梁自身因素有关外,还与砌体梁垮落步距等因素相关。结合塔山煤矿8102综采工作面地质条件,计算了支架荷载的理论值,验证了理论分析的合理性。理论研究成果对于分析特厚煤层开采时的支架荷载的大小,合理选择支架减少顶板事故具有一定的工程实际意义。     

含煤地层AVO正演模型参数优选分析

采用GEOVIEW软件,选取顶底板为泥岩,中间为煤层（厚度变化范围0～30m）的三层介质作模型,通过改变中间煤层的厚度、处理采样率、子波等参数,并保持上下围岩参数不变的方式来讨论相关参数对AVO响应的影响,结果表明当处理采样率越高时,AVO截距和梯度精度就越高;子波采样率过低,会引起AVO截距和梯度值的扰动现象;当子波采样率提高到一定程度时,扰动现象消除;子波主频的大小决定了调谐效应的范围,提高地震波主频,有利于提高分辨率;子波长度的变化对AVO截距和梯度值求取影响不大。上述结论为AVO正演模型参数优选提供了依据,其最佳参数的选取可有效提高含煤地层AVO正演模型的精度。