鲁豫交界地区尾波Q_c值分析研究

该文对濮阳台记录的21次地震进行了地震波衰减研究,讨论了地球介质品质因子随频率变化的关系;利用不同地震采用不同流逝时间的尾波品质因子测定方法,有效去除了由于不同地震或同一地震的地震散射波在纵向介质中穿透深度的不同而导致对品质因子测量结果的影响,从而有利于扑捉到品质因子的异常变化特征与地震孕育过程的关系。利用改进后的模型,对鲁豫交界地区尾波值进行了计算,得到了该地区品质因子随频率的变化关系和区域介质衰减的时间变化特征。     

Errors and correction of precipitation measurements in China

In order to discover the range of various errors in Chinese precipitation measurements and seek a correction method, 30 precipitation evaluation stations were set up countrywide before 1993. All the stations are reference stations in China. To seek a correction method for wind-induced error, a precipitation correction instrument called the ＂horizontal precipitation gauge＂ was devised beforehand. Field intercomparison observations regarding 29,000 precipitation events have been conducted using one pit gauge, two elevated operational gauges and one horizontal gauge at the above 30 stations. The range of precipitation measurement errors in China is obtained by analysis of intercomparison measurement results. The distribution of random errors and systematic errors in precipitation measurements are studied in this paper. A correction method, especially for wind-induced errors, is developed. The results prove that a correlation of power function exists between the precipitation amount caught by the horizontal gauge and the absolute difference of observations implemented by the operational gauge and pit gauge. The correlation coefficient is 0.99. For operational observations, precipitation correction can be carried out only by parallel observation with a horizontal precipitation gauge. The precipitation accuracy after correction approaches that of the pit gauge. The correction method developed is simple and feasible.     

航空矢量重力测量水平分量的带限直接地形影响

基于第二类Helmert凝聚法的级数展开式,独立推导了航空矢量重力测量水平分量带限直接地形影响的计算公式。在中国西部山区选取了两条沿纬圈方向4000m航线高度上的航线,采用 的数字高程模型基于解析核计算了水平分量的直接地形影响,经低通滤波后与基于带限公式计算的地形影响进行了比较。数值计算结果表明,二者吻合较好,本文给出的带限地形影响公式可用于航空矢量重力测量水平分量的地形归算。     

新疆比勒提地区断裂构造磁异常信息提取及解释

比勒提地区位于新疆西南天山,以该区1：50000高精度磁测数据为基础,采用解析延拓、方向导数等技术手段提取与断裂构造有关的磁异常信息,对区域内构造进行识别,结合标本物性参数统计,对引起磁异常的原因进行分析。对区域磁异常向上延拓及求一阶导数后进行对比,圈定4个特征异常带A1-A4,结合地质资料,识别出4条断裂构造FW1-FW4,FW1和FW2对应喀拉铁克断裂及其次级断裂,FW3为构造动力作用产生的强片理化带,FW4为隐伏断裂,表明高精度磁法测量在本区能有效识别断裂并反映其分布。     

煤层冲刷带预测方法评述

介绍了沉积分析法、矿井物探法以及地质统计法三种煤层冲刷带预测方法.实例证明,根据煤矿生产的具体情况,选择一种或综合运用几种方法,能较好地预测冲刷带的位置和范围.     

Detection and extraction of signals from the epoch of reionization using higher-order one-point statistics

Detecting redshifted 21-cm emission from neutral hydrogen in the early Universe promises to give direct constraints on the epoch of reionization (EoR). It will, though, be very challenging to extract the cosmological signal (CS) from foregrounds and noise which are orders of magnitude larger. Fortunately, the signal has some characteristics which differentiate it from the foregrounds and noise, and we suggest that using the correct statistics may tease out signatures of reionization. We generate mock data cubes simulating the output of the Low Frequency Array (LOFAR) EoR experiment. These cubes combine realistic models for Galactic and extragalactic foregrounds and the noise with three different simulations of the CS. We fit out the foregrounds, which are smooth in the frequency direction, to produce residual images in each frequency band. We denoise these images and study the skewness of the one-point distribution in the images as a function of frequency. We find that, under sufficiently optimistic assumptions, we can recover the main features of the redshift evolution of the skewness in the 21-cm signal. We argue that some of these features – such as a dip at the onset of reionization, followed by a rise towards its later stages – may be generic, and give us a promising route to a statistical detection of reionization.     

Reliability bearing capacity analysis of footings on cohesive soil slopes using RFEM

Reliability analysis of bearing capacity of a strip footing at the crest of a simple slope with cohesive soil was carried out using the random finite element method (RFEM). Analyses showed that the coefficient of variation and the spatial correlation length of soil cohesion can have a large influence on footing bearing capacity, particularly for slopes with large height to footing width ratios. The paper demonstrates cases where a footing satisfies a deterministic design factor of safety of 3 but the probability of design failure is unacceptably high. Isotropic and anisotropic spatial variability of the soil strength was also considered.     

使用价值分析优化方法在功能-技术矩阵求解中的应用

功能-技术矩阵,经众多工作者的努力研究,已渐趋成熟与实用。但如何利用功能-技术矩阵构造在广义现代设计领域中适用的科学模式,解决多学科设计方案的组成与评价问题,还存在薄弱环节。本文利用\     

利用混合法构建三维数字岩心(英文)

在弹性波有三维数字岩心描述了岩石的微观孔隙结构。X射线CT扫描是获取三维数字岩心最准确和直接的方法,但实验成本高。本文结合沉积过程模拟和模拟退火算法,提出了重建三维数字岩心的混合法,基于岩石二维图像重建三维数字岩心。利用岩石颗粒沉积算法构建初始数字岩心,作为模拟退火算法的初始状态。运用模拟退火算法调整岩石颗粒和孔隙的相对位置,使三维数字岩心与岩心二维图像具有相似的自相关函数,从而建立三维数字岩心。与传统模拟退火算法相比,该方法计算时间明显减小。运用局部孔隙度理论定量比较了重建数字岩心和岩心X射线微CT图像,两种数字岩心具有相似的均质性和孔隙连通性。利用有限元方法和格子玻尔兹曼方法分别模拟了重建三维数字岩心的地层因素和渗透率,数值模拟结果与实验结果相符。相比传统模拟退火算法,混合法重建数字岩心的传导特性更接近真实岩心的传导特性。