Parameters affecting maximum fluid transport in large aperture fractures

We present results of laboratory experiments to study the behavior of liquids moving in unsaturated wide-aperture fractures. A 5-mm-thick glass plate cut with a 1.7-mm aperture was used as a fractured rock analog to study behavior of film and capillary droplet flow modes. Flow rates ranged between 0.6 and 6.0 ml/min. Variability in the ambient barometric pressure, resulting from weather conditions, seemed to play a role in the natural selection of flow mode. For droplet mode, constant input conditions resulted in highly variable transport properties within the fracture. The advancing meniscus exhibited a dynamic contact angle that was a function of the droplet speed and much larger than the static contact angle. Flow rate was reduced due to the larger contact angle. Analytical expressions for droplet velocity and flow capacity are presented as a function of the dynamic rather than the static contact angle.     

A comparison of the evolution of diamondiferous quartz-rich rocks from the Saxonian Erzgebirge and the Kokchetav Massif: are so-called diamondiferous gneisses magmatic rocks?

The petrography and chemical composition of minerals of quartz-rich diamondiferous rocks from the Kokchetav Massif, especially the zonation of garnet, were studied and compared with diamondiferous quartzofeldspathic rocks from the Saxonian Erzgebirge. Many compositional and textural features were found to be similar. For instance, microdiamonds are enclosed systematically in a specific intermediate growth zone of garnet in these rocks. On the basis of experimental data, a magmatic scenario was constructed to check if the quartz-rich diamondiferous rocks are of magmatic origin. By this, the P-T paths, derived here for the Kokchetav rocks, and the textural observations it is concluded that the minerals of the diamondiferous rocks have crystallized from silicate melts. These melts originated by anatexis of deeply submerged metasediments (Erzgebirge: at T as high as 1200°C, Kokchetav Massif: at 50-100°C lower T) and ascended from at least 200 km depth. Relics of the pre-anatectic evolution are still present, for instance, as garnet cores. After ascent and emplacement of the magma in deep portions of thickened continental crust (Kokchetav Massif: 45-50 km close to 800°C, Erzgebirge: 55-60 km at 30-50°C lower T) considerable quantities of (white and/or dark) micas formed by peritectic reactions from melt. For instance, garnets could be resorbed at this stage and biotite grew instead. After the magmatic stage, retrogression took place much stronger in the Kokchetav Massif. This was accompanied by deformation transforming broadly the magmatic texture of quartz-rich diamondiferous rocks from the Kokchetav Massif to a gneissic texture.     

青藏铁路抛石路基的温度特性研究

铁路道渣和片石铺层的对流换热为多孔介质的热传导问题，根据多孔介质中流体热对流的连续性方程、动量方程和能量方程，应用伽辽金法导出了多孔介质对流换热的有限元公式，并对抛石路基和传统道渣路基在未来25a创温度变化进行了预报分析和比较．计算结果表明，在150cm的抛石厚度，片石直径为10cm，年温度较差30℃的倩况下，在路基中心线y＝一5m处，抛石路基下的冻土温度要比传统路基的温度低2．45℃，抛石路基有对其下面的冻土提供冷能的制冷作用，可以保证冻土路基的稳定．因此，推荐该种路基作为青藏铁路高温冻土区的路基结构，可以最大限度地保护冻土区的铁路．     

试论火山岩储层的类型及其成因特征

本文在总结前人研究的基础上，结合胜利及辽河油田最新资料，提出了一种火山岩油气藏储层分类方案，共分为火山熔岩型、火山碎屑岩型和潜火山岩型3种类型。其中火山碎屑岩型又可分为正常火山碎屑岩型和火山碎屑沉积岩型两种亚类型；潜火山岩型分为隐爆角砾岩型和蚀变岩型两种亚类型。文中结合实例对各种类型储层的成因机制、空间展布特点以及储集性的变化特征进行了阐述和讨论。     

论层序地层学与含油气系统在油气勘探中的联系——以鄂尔多斯中生代盆地为例

虽然层序地层学与含油气系统理论的各自研究对象和研究方法不同，但由于层序地层学研究对象(沉积岩)是含油气系统研究对象(油气)的载体，二者可以由含油气盆地分析有机的结合起来。层序地层分析包含了对含油气系统的地质要素及成藏作用载体的分析，因而沉积层序的组成单元与含油气系统的地质要素有必然的联系：在一个沉积盆地的数个沉积层序中，成熟烃源岩往往是地史中具一定埋深、分布广、厚度大、有机质含量高的凝缩层，这个凝缩层往往是一个构造超层序的最大海(湖)泛面；储集岩往往是成熟烃源岩之上层序的低水位体系域或紧邻成熟烃源岩的高水位体系域；有效盖层为储集岩之上层序的水进体系域及凝缩层；成熟烃源岩之上的沉积层序为上覆岩层；低水位体系域储集岩有可能沿上倾方向尖灭，被层序界面及其上层序的水进体系域岩性圈闭；除构造裂缝外，低水位体系域下切谷可作为油气向上运移通道；一个含油气系统往往跨越不同的沉积层序甚至构造超层序。     

滇西思茅大平掌矿区火山岩特征及其构造环境

滇西大平掌铜多金属矿床的含矿建造(龙洞河组)主要由细碧岩-角斑岩-石英角斑岩和流纹岩-硅质岩组成,伴有部分火山角砾岩、凝灰岩,属双峰式火山岩组合。火山岩具明显的Na2O>K2O和Nb、Ta、Zr、Hf、Ti亏损。岩石化学和微量元素判别标志指示含矿建造形成于岛弧裂陷环境。结合区域构造古地理资料分析,它是滇西南古特提斯洋壳在晚石炭世-早二叠世由西向东俯冲过程中岩浆作用的结果。     

煤田火区烧变岩光谱特征分析及其信息提取

中国北方煤田煤层自燃现象非常严重.利用遥感手段可以快速实现火区的动态监测,及时为灭火工程提供信息.烧变岩作为火区的地表指示性特征,是火区解译最直观的信息.本文从烧变岩的反射光谱曲线特征入手,对几种提取烧变岩信息的方法进行比较,从而确定解译烧变岩的最佳方法,为圈定火区的范围和位置奠定基础.     

小浪底工程岩体力学参数研究

本文系统研究了小浪底工程的岩体的强度特征,采用了室内试验,野外结构面统计,工程地质类比法、模型试验法和Hoek Brown的经验法,估算了工程岩体的力学指标,指出了上述各种方法中所存在的不足,认为在工程实践中,应尽可能使用多种估计方法,交叉校核所得参数,以提高参数的可靠性,保证工程的安全,节约投资。     

应用RMi法估算岩体变形模量

RMR法与Q法是国内外八、九十年代岩体质量和参数估算的常用方法,然而RMR法和Q法对质量较差的岩体不太实用,而RMi法是一种既适用于软岩又适用于硬岩的岩体质量评价和参数估算方法。本文在介绍RMi法基本原理的基础上,对贵州省鱼简河水库坝基岩体变形模量进行确定。     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003