曹妃甸浅滩表层砂体插桩深度研究

曾妃甸浅滩原为古滦河三角洲,三角洲废弃后,海底表层沉积物在波浪潮流的簸选及自重应力作用下,沉积物颗粒粗化,粒度单一,且堆积紧密,工程强度较高。平台在该海医插桩时往往难以贯穿该层,其实际插桩深度较预定深度存在较大偏差。本文对此类砂体的形成机制、插桩过程中土体的压实作用对砂体强度的影响进行了分析,在对砂体力学参数做出适当调整后,运用太沙基地基极限荷载公式进行计算,得到了与实际情况较为一致的结果。     

膨胀土作为桩基持力层的实验研究

根据对邯郸膨胀土中桩基的实验研究,认为膨胀土具有一定埋深时,可作为良好的桩基持力层;通过3种桩型应用情况的分析比较,论证了扩底桩是膨胀土持力层上理想的桩基形式。     

Research on Practicability and Feasibility for a New-Type Tuned Mass Damper System-TMD

lNTRODUCTIONThe theories and applications of structural contr()l tlcveloped rapidly in the last 20 years. As one of the additiona1 I)asslve control technologY' TMD is used in practice and can suppress the vibration caused by wind or machinery shake (Ayorinde and Warburton, 1980; Den Hartog, l956 ). The TMDsystem has been used in the industrial and civil buildlngs t() rc-duce structural vibration in some European and American ()o[lntries (Ayorinde and Warburton, l980; Warburton. ] f)…     

Predicting the displacement of triple pendulum™ bearings in a full‐scale shaking experiment using a three‐dimensional element

The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum? (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.     

Mineralization and fluid evolution of the Jiyuan polymetallic Cu–Ag–Pb–Zn–Au deposit,eastern Tianshan,NW China

The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO₂-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.     

插拔桩靴对临近桩靴承载力的影响研究

自升式钻井船桩靴的插拔过程将会对临近井口平台的桩靴基础产生不利影响。开展了室内模型试验研究,将试验结果与理论分析结果相结合,得到了桩靴插拔的影响范围及影响范围内土体强度的变化规律,并推导了桩靴插拔影响区内临近桩靴承载力的计算方法,与模型试验结果进行了对比验证。研究表明,桩靴插拔后砂土相对密实度降低,其降低程度随距桩靴距离的增加而逐渐减小,影响范围约为1倍桩靴直径。受桩靴插拔影响,临近桩靴的承载力下降,降低比例随两桩靴相对间距的增大而减小,随桩靴相对插深的增加而增加。当两桩靴相对间距大于2倍插拔桩靴直径时,可认为桩靴插拔对临近桩靴基础承载力无影响。     

Rotation Center and Horizontal Bearing Capacity of the Bucket Foundation in Soft Ground

In the last 20 years, the bucket foundation has been developed as a new type of offshore platform structure. Because of its short period of application to engineering practices, the theoretical decision on the rotation center and horizontal bearing capacity of the bucket foundation has yet to be agreed. A limit analysis method is used to determine the updated rotation center position and horizontal bearing capacity to evaluate the failure mechanisms of the bucket foundations. The results are compared with numerical simulation and experiments, and also with other theoretical methods. The proposed method can satisfactorily consider the engineering conditions and the result is accurate in determining the rotation center and horizontal bearing capacity.     

Rutile inclusions in garnet from a dissolution‐reprecipitation mechanism

Metamorphic garnet commonly contains needle‐like rutile inclusions as well as equant rutile inclusions that surround quartz inclusions and range in size from submicrometer to nanometer. Although the origin of these equant rutile inclusions, that is, exsolution or non‐exsolution, has important implications for petrological and tectonic processes, the crystallographic characteristics of these inclusions have rarely been studied because of the small sizes and analytical difficulties involved. Here, we report the crystallographic characteristics pertinent to the genetic origin of minute equant rutile inclusions in cloudy, nearly spherically shaped garnet domains with Ti‐depleted compositions surrounding quartz inclusions in ultrahigh‐pressure garnet from several diamondiferous Erzgebirge quartzofeldspathic gneissic rock samples. TEM analyses show that the equant rutile crystals in cloudy garnet domains are partially bounded by the low‐energy {100}_rt ± {110}_rt ± {101}_rt facets and have rather random crystallographic orientation relationships (CORs) with the garnet host, with preferential alignment of low‐energy lattice planes, for example, {100}_rt//{112}_grt, for some rutile crystals. Although the rather random CORs are unlikely to be attributed to solid‐state exsolution subjected to the stringent topotactic garnet lattice constraints, the characteristic subhedral {100}_rt ± {110}_rt ± {101}_rt crystal forms of rutile can be rationalized by a metasomatic dissolution‐reprecipitation mechanism via a fluid phase. In this scenario, the quartz+fluid inclusions in garnet were first subjected to decompression microcracking during rock exhumation, followed by dissolution of Ti‐bearing garnet matrix at the crack tips or along the crack surfaces and subsequent reprecipitation of rutile, apatite, gahnite, akdalaite, and Ti‐depleted garnet. The rapid coalescence between rutile and garnet crystals in fluid or direct attachment of rutile crystals onto the dissolving crack surfaces would then yield the rather random CORs as reported here. These results, along with previous work on rutile needles, indicate rather diverse genesis of rutile inclusions in various crystal forms, thus shedding light on the controversial exsolution origin for other inclusion suite/microstructure in minerals.     

Formation of elongated granite–migmatite domes as isostatic accommodation structures in collisional orogens

The mid-Carboniferous Pelhřimov core complex, Bohemian Massif, is a crustal-scale elongated granite–migmatite dome interpreted to have formed by gravity-driven diapiric upwelling of the metapelitic middle crust. The vertical diapiric flow is evidenced by outward-dipping foliation and lineation patterns, deformation coeval with the widespread presence of melt, rapid exhumation of the dome center from depths corresponding to pressure of about 0.6 GPa to shallow levels (pressure less than 0.2 GPa) within 2 M.y., and kinematic indicators of downward return flow of the mantling rocks. As compared to common diapirs, however, the Pelhřimov complex exhibits a more complicated inferred strain pattern with two perpendicular, irregularly alternating directions of horizontal extension in what is interpreted as the diapir head. Comparison of structural data from migmatites with anisotropy of magnetic susceptibility (AMS) data in granites also reveals that only final increments of strain are recorded in the granites. The map dimensions and gravity image of the complex suggest that the diapiric upwelling affected a large portion of the orogen's interior between two microplates brought together during continental collision. The northwesterly microplate (the upper-crustal Teplá–Barrandian unit) collapsed vertically as an ‘elevator’ at around 346–337 Ma whereas the easterly microplate (Brunia) was underthrust beneath the Moldanubian rocks during ∼346–330 Ma (the indentor). It is suggested that these microplates then acted as cold and rigid margins localizing mid-crustal diapirism and associated voluminous S-type granite plutons inbetween, parallel to the edge of the Brunia indentor.We conclude that bringing together soft metapelitic middle crust with two rigid lithospheric blocks during collision resulted in significant lateral temperature and strength variations across the orogen's interior. A general conclusion from these inferences is that granite–migmatite domes delineating margins of collided microplates may form as crustal-scale structures accommodating late-orogenic isostatic reequilibration.     

Ca-rich Garnet-Clinopyroxene Rocks at Hujialin in the Su-Lu Terrane (Eastern China): Deeply Subducted Arc Cumulates?

Layers of Ca-rich garnet–clinopyroxene rocks enclosedin a serpentinite body at Hujialin, in the Su–Lu terraneof eastern China, preserve igneous textures, relict spinel ingarnet, and exsolution lamellae of Ca-rich garnet, ilmenite/magnetite,Fe-rich spinel, and also amphibole in clinopyroxene. In termsof their major and trace element compositions, the studied samplesform a trend from arc cumulates towards Fe–Ti gabbros.Reconstructed augite compositions plot on the trend for clinopyroxenein arc cumulates. These data suggest that the rocks crystallizedfrom mantle-derived magmas differentiated to various extentsbeneath an arc. The Ca-rich garnet + diopside assemblage isinferred to have formed by compressing Ca-rich augite, whereasthe relatively Mg-rich cores of garnet porphyroblasts may haveformed at the expense of spinel. The protolith cumulates weresubducted from near the crust–mantle boundary (c. 1 GPa)deep into the upper mantle (4·8 ± 0·6 GPaand 750 ± 50°C). Negatively sloped P–T pathsfor the garnet–clinopyroxene rocks and the corollary ofcorner flow induced subduction of mantle wedge peridotite arenot supported by the available data. Cooling with, or without,decompression of the cumulates after the igneous stage probablyoccurred prior to deep subduction. KEY WORDS: arc cumulates; Ca-rich garnet; garnet–clinopyroxene rocks; Su–Lu terrane; UHP metamorphism