Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

区域水资源开发模式研究

正确的不资源开发模式对于指导合理开发利用区域水资源并最大限度降低环境生态负效应具有重要的意义。以松嫩盆地为例，根据研究区内的水文、水文地质条件，应用模糊集理论与方法确定出松嫩盆地各县市的水资源开发模式，并对各种开发模式做了简要论述。     

吉林省通榆县旅游资源模糊评价研究

该文基于模糊数学的理论和方法 ,从不同角度、不同层次对吉林省通榆县的旅游资源进行综合评价 ,并针对旅游资源特征 ,提出了发展旅游业的基本构思。     

模糊区域拓扑关系模型

拓扑关系是地理信息系统中空间要素之间最基本也是最重要的关系之一，是进行绝大多数空间查询和分析的基础。非模糊空间要素之间的拓扑关系在一般拓扑学等理论的基础上已有相关的模型和描述，并在实践中得到广泛的应用，如何建立模糊空间要素这间的拓扑关系是建立模糊要素地理信息系统的基础。该文在模糊扑扑学的基础上提出了模糊区域的定义，建立了用于分析模糊区域之间拓扑关系的理论和模型，提出了4*4-intersection模型拓扑关系矩阵，并分析了不同拓扑关系矩阵对于非模糊区域之间、模糊区域之间建立拓扑关系的区别和联系，最后采和不同公式对模糊区域之间的关系进行了系统的描述。     

地铁基坑支护方案的模糊评价

根据地匠深基坑支护工程的特点，建立支护方案的指标体系，运用层次分析法确定了指标的权重，采用模糊数学的方法，构造了单极模糊评价模型，将指标因素的不确定性进行定量化。实例分析表明，模糊综合评价进行深基坑支护方案优选的方法是可行的、有效的。     

油气化探综合异常模糊划分动态聚类分级评价

通过选取描述油气化探综合异常的各种特征参量，借助模糊数学工具，利用最优聚类中心所具有的代表特征，建立分级指标，对油气化探综合进行分级评价。鄂尔多斯盆地油气化探综合异常的评价实例结果表明，利用油气化探综合异常各种特征参量进行动态聚类分级评价是可行的。     

基于图像特征的烟叶分级

讨论了基于图像特征的烤烟烟叶分级系统的建模及其实现，给出了烟叶分级模型的数学描述，探讨了模型库的优化和特征隶属度及烟叶模式的可信度的计算问题，并通过试验分析了FTGS系统的性能和有效性。     

Facies Clustering in Turbidite Successions: Case Study from Andaman Flysch Group, Andaman Islands, India

Bed thickness data of two turbidite sections viz., Corbyn's Cove section, South Andaman and Kalipur section, North Andaman those belong to Oligocene Andaman Flysch Group, a forearc submarine fan system, were assessed for facies clustering employing Hurst statistics. Both the sections show Hurst phenomenon and reveal clustering in terms of thick and thin beds. Forcing behind event (bed) depositions in either of the studied sections was assessed statistically and inferred to be non-random and with cyclicities of irregular physical length. The inferred paleogeography through Hurst criteria though worked well for distal fan setting i.e., basin floor sheet sandstones of Corbyn's Cove section, its unequivocal application in proximal fan deposits remains to be tested. The mismatch in paleogeographic interpretation between Hurst test result (lobe-interlobe) and field observation (channel-levee) for the inner fan deposit is explained through differential facies stacking between fans grow in sea-level lowstand and highstand. Lower bed amalgamation, poor sand to mud ratio and subordinately present thick event deposits may be the result of active growth of Andaman Flysch fan in sea level highstand and expressed in lower Hurst K value for inner fan channel-levee association (Kalipur section) compared to many of the channel-levee deposits of lowstand fan systems observed world over.     

Compositional Geometry and Mass Conservation

A geometrical structure is imposed on compositional data by physical and chemical laws, principally mass conservation. Therefore, statistical or mathematical investigation of possible relations between data values and such laws must be consistent with this structure. This demands that geometrical concepts, such as points that specify both mass and composition in linear space, and lines in projective space that specify composition only, be clearly defined and consistent with mass conservation. Mass thus becomes the norm in composition space in place of the Euclidean norm of ordinary space. Coordinate transformations inconsistent with this geometry are accordingly unnatural and misleading. They are also unnecessary because correlation arising from the constant mass presents no unusual difficulty in the analysis of the underlying quadratic form.     

A statistical approach to evaluating distance metrics and analog assignments for pollen records

The modern analog technique typically uses a distance metric to determine the dissimilarity between fossil and modern biological assemblages. Despite this quantitative approach, interpretation of distance metrics is usually qualitative and rules for selection of analogs tend to be ad hoc. We present a statistical tool, the receiver operating characteristic (ROC) curve, which provides a framework for identifying analogs from distance metrics. If modern assemblages are placed into groups (e.g., biomes), this method can (1) evaluate the ability of different distance metrics to distinguish among groups, (2) objectively identify thresholds of the distance metric for determining analogs, and (3) compute a likelihood ratio and a Bayesian probability that a modern group is an analog for an unknown (fossil) assemblage. Applied to a set of 1689 modern pollen assemblages from eastern North America classified into eight biomes, ROC analysis confirmed that the squared-chord distance (SCD) outperforms most other distance metrics. The optimal threshold increased when more dissimilar biomes were compared. The probability of an analog vs no-analog result (a likelihood ratio) increased sharply when SCD decreased below the optimal threshold, indicating a nonlinear relationship between SCD and the probability of analog. Probabilities of analog computed for a postglacial pollen record at Tannersville Bog (Pennsylvania, USA) identified transitions between biomes and periods of no analog.