2010智利莫尔M_W8.8地震对其破裂区及附近地区地震活动性的影响

强震的发生与地壳中应力增加有关。库仑破裂应力被用于研究由于某次强震发生所产生的应力变化。2010年智利莫尔M_W8.8地震发生之后,其破裂区以南地区没有发生M≥6.0地震,而在其以北地区于2015年在智利发生了伊亚佩尔M_W8.3级地震。在这两个地区地震活动性悬殊。本文利用库仑破裂应力研究了2010年智利莫尔M_W8.8地震在这两个地区产生的应力变化。结果表明,2010年智利莫尔M_W8.8地震在其破裂区以北地区产生的应力变化为正值,有利于断层错动发震,而在其破裂区以南地区产生的应力变化为负值,具有抑制断层错动发震的作用。     

2015年四川乐山金口河M5.0地震孕震构造条件分析

2015年1月14日乐山金口河M5.0地震发生在历史地震强度较低的川南山区与四川盆地交界一带。基于四川区域地震台网的震相报告与波形资料,采用双差定位法对地震序列进行重新定位,同时,采用CAP波形反演方法及HASH方法反演了主震及序列中8次M_L≥2.0地震的震源机制解。另外,利用Coulomb3计算了主震发生后库仑应力改变量,得到的结果如下：①重新定位结果显示,金口河M5.0地震位于（103.18°E,29.32°N）,震源深度16.6km,略深于波形反演结果（12km）。序列分布在NNW向天全-荥经断裂和NE向西河-美姑断裂的交汇部位,余震序列在空间上呈NE向展布。②M5.0主震的机制解为节面Ⅰ：走向350°/倾角46°/滑动角107°,节面Ⅱ：走向146°/倾角47°/滑动角73°,表现为走向NW（NNW）、中等倾角的逆冲型运动方式。序列中其余8次M_L≥2.0余震大多以走向NE的逆冲型地震为主,个别为走滑或正断层类型。主震和大部分余震的节面方向不一致,主震节面方向与余震长轴方向也不一致。③主震后库仑应力改变量显示,余震主要发生在主震引起的库仑破裂应力增加的区域。综合分析推测,NNW向天全-荥经断裂为本次地震主震的发震构造,倾向NE的机制解节面Ⅰ指出了该断裂的几何产状;M5.0主震发生后,立即触发了其旁侧的NE向西河-美姑断裂,并激发了多次余震。     

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.     

循环荷载作用下红黏土累积变形研究

通过GDS动三轴设备对赣南红黏土进行了一系列排水条件下的大次数循环试验,研究不同循环应力比、固结应力比及围压对赣南红黏土累积变形特性的影响。结果表明：在不同固结应力比、固结压力和循环应力比条件下,红黏土的累积应变都呈现出先迅速累积,后增长变缓,最终稳定的趋势;在一定的循环次数之后,不同初始固结应力和不同初始应力比条件下累积应变与循环次数之间的变形规律呈现为线性关系,且初始固结应力和初始固结应力比越小,其线性相关性越好;不同循环应力比下赣南红黏土的平均累积应变速率与循环次数之间也呈现出明显的线性关系。此外,基于以上关系建立了赣南红黏土在长期循环荷载作用下的累积变形预测模型,并通过对比验证了该模型的可行性。     

CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT

Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique. We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(M_L ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015. Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(M_L ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault. Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ₁ of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ₁ of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ₁ of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir.     

Simulation of Stress Distribution around Tunnels and Interaction between Tunnels Using an Elasto–plastic Model

This article presents a computer simulation of stress distribution around tunnels and interaction between tunnels using an elasto-plastic model. A finite element method using ANSYS software has been used for the analyses of one and two tunnels at different overburden depths with different separating distances between the tunnels. The results of numerical analyses indicate that stress distribution and stress concentration around the tunnels vary with the overburden depths. It is found that the coefficients of stress concentration for elasto-plastic medium are smaller than those for elastic one by 1.9%. Furthermore, the interaction between the two tunnels rapidly decreases with the increase of separation distance between them. In addition, for quantitatively describing the interaction between the two tunnels, a critical separation distance is introduced. The critical separation distances between the two tunnels at different overburden depths are 8 m, 12 m, and 14 m respectively. This fact is very important and essential for the design of mining tunnels and to ensure safety in tunnel engineering.     

基于声发射的岩石破裂应力场动态反演

为获取岩石在破裂过程中的动态应力场,首先进行室内物理试验获取声发射数据,在此基础上基于能量耗散原理,利用实测声发射信息建立起岩石细观损伤表征方程,并通过FLAC3D内嵌FISH语言进行二次开发,自动搜索声发射损伤影响范围内岩石单元并对其力学参数进行弱化,计算得到较为真实的岩石破裂动态应力场。结果表明,计算得到的岩石破裂应力场与实测结果有良好的对应关系,验证了岩石细观损伤表征方法的合理性。同时,获得的岩石动态破裂应力场不仅可以从岩石力学的角度解释破坏产生的原因,也对预测岩石下一步破坏具有指导意义。但这种方法仍具有一定的局限性,需要进一步的探索研究。     

应力波斜入射对岩体节理端部的影响

岩体节理在受到应力波扰动时端部受力会发生不同程度的连续性变化,为具体分析这种动态变化与应力波入射角度之间的关系,引用岩石非线性法向本构关系与线性切向本构关系的组合模型以及相应的在P波斜入射节理的应力波传播方程,结合岩石断裂力学中Ⅰ、Ⅱ型裂纹尖端应力和位移场的相关理论,得出组合形式下的节理端部应力场和位移场随质点振速变化的计算公式。通过不同入射角的模拟脉冲信号作用对端部应力位移的变化分析：应力波斜入射节理导致节理端部上、下两侧应力与位移场非对称分布,随着入射波质点振速的增减变化,应力集中位置会出现变化;计算并整理模型中节理端部上、下两侧0.005 m位置的数据,节理法向刚度由入射波质点振速带来的变化直接影响到应力波的透射与反射,进而会导致端部的应力与位移出现滞后效应;节理端部横向位移值与入射角度并非单调变化,而竖向位移会随着入射角的增大呈现下降趋势。     

定向剪切应力路径下冻结黏土变形特性试验

为研究复杂应力路径下冻土的强度与变形特征,采用冻土空心圆柱仪（FHCA-300）对不同负温状态下的饱和冻结黏土开展定向剪切试验,基于不同剪切方向下冻结黏土的轴向和扭剪分量的应力-应变关系,探讨土样的剪切变形特征、各向异性属性以及剪切带的演变规律,并考察温度、大主应力方向角、平均主应力以及中主应力系数等因素对冻结黏土强度的影响。结果表明：平均主应力p值对冻结黏土的应力-应变关系影响显著,尤其是p=4.5 MPa时具有较高的剪切强度,且该值可能为压融临界p值;大主应力方向变化会诱发冻结黏土的各向异性,随着大主应力方向角的增加,冻结黏土剪切强度逐渐降低,并有明显的剪切带产生;中主应力系数的增加使得轴向强度有逐渐降低的趋势,但对剪切强度影响不明显;随着温度的降低,冻结黏土强度逐渐增大,试样发生脆性破坏并出现剪切破裂面,其剪切强度主要取决于冰颗粒和土颗粒的胶结力。     

岩石空心圆柱扭剪仪研制的重点问题及研究进展

随着深部岩体工程的发展,开挖卸荷导致的应力主轴旋转问题引起了广泛关注。首先,分析总结了岩体工程中存在的应力主轴旋转问题及其对岩体工程稳定性的影响;其次,介绍了土体空心圆柱扭剪仪的发展现状及其特点,从荷载的施加方式、试样尺寸两个方面指出了研制岩石空心圆柱扭剪仪的关键问题,并与土体空心圆柱扭剪仪进行了对比,提出了新的扭矩施加技术和合理的岩石空心圆柱试样尺寸;最后,总结概括了考虑应力主轴旋转的土体本构模型的研究成果,并对考虑应力主轴旋转的岩石本构关系的研究进行了展望。该工作将对岩石空心圆柱扭剪仪的研制和相关理论的研究提供一定的参考和指导。