Stability Analysis and Numerical Simulation of Differential Frost Heave

Differential frost heave is often implicated in the formation of patterned ground in regions subject to recurrent freezing and thawing. A linear stability analysis (LSA) indicates that a continuum model of frost heave is linearly unstable under typical natural freezing conditions of silty-clay soils. A two-dimensional non-linear numerical analysis corroborates the frozen time LSA results, and also indicates the importance of non-linear and time-dependent terms that ultimately lead to a preferred mode, which the LSA fails to predict. Instability of the one-dimensional solution occurs at shallow freezing depths and near-zero surface loads when positive perturbations in the ice content at the freezing front lead to a concomitant increase in thermomolecular pressure and upward ice velocity. Differential frost heave can then occur because of the increased heat flux from the perturbed surfaces. A three-dimensional model using random initial surface perturbations indicates that regular surface patterns will evolve with a length scale in the order of 2–4 meters, which corresponds quite closely with naturally-occurring non-sorted patterned ground.     

On the physical model of earthquake precursor fields and the mechanism of precursors＇timespace distribution──origin and evidences of the strong body earthquake──generating model

Ｏｎｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌｏｆｅａｒｔｈｑｕａｋｅｐｒｅｃｕｒｓｏｒｆｉｅｌｄｓａｎｄｔｈｅｍｅｃｈａｎｉｓｍｏｆｐｒｅｃｕｒｓｏｒｓ＇ｔｉｍｅｓｐａｃｅｄｉｓｔｒｉｂｕｔｉｏｎ──ｏｒｉｇｉｎａｎｄｅｖｉｄｅｎｃｅｓｏｆ　ｔｈｅｓｔｒｏｎ...     

中国三个大地震的震源参数及讨论

大地震的震源机制及地震矩、应力降等参数,不(又对认识地震的破裂过程,而且对预报强地面运动都是非常重要的。一些文章对板内地震应力降的特点、地震矩与高频源谱的关系及区域特征的讨论,使我们可直接由长周期体波或面波得出的地震矩M₀估计出不同地区中大地震的高频源谱,以供强地面运动预报参考。 由于对发生在中国板内的1976年11月6日盐源地震（M_s=6.5）和1976年11月15日宁河地震（M_s=6.3）的震源参数还没有详尽的报道;另外,对1973年7月14日     

Large eddy simulation of hydrocyclone—prediction of air-core diameter and shape

Hydrocyclones are widely used in the mining and chemical industries. An attempt has been made in this study, to develop a CFD (computational fluid dynamics) model, which is capable of predicting the flow patterns inside the hydrocyclone, including accurate prediction of flow split as well as the size of the air-core. The flow velocities and air-core diameters are predicted by DRSM (differential Reynolds stress model) and LES (large eddy simulations) models were compared to experimental results. The predicted water splits and air-core diameter with LES and RSM turbulence models along with VOF (volume of fluid) model for the air phase, through the outlets for various inlet pressures were also analyzed. The LES turbulence model led to an improved turbulence field prediction and thereby to more accurate prediction of pressure and velocity fields. This improvement was distinctive for the axial profile of pressure, indicating that air-core development is principally a transport effect rather than a pressure effect.     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

Variability in Early Amazonian Tharsis stress state based on wrinkle ridges and strike-slip faulting

We present evidence for a decrease in the magnitude of Tharsis-circumferential compressive stress during the Late Hesperian to the Middle Amazonian based on chronologic changes in the predominant style of faulting in southern Amazonis Planitia. Using high-resolution MOLA topography, we identify a population of strike-slip faults that exhibit Middle Amazonian-aged displacements of regional chrono-stratigraphic units. These strike-slip faults are adjacent to an older population of previously documented Late Hesperian-aged thrust faults (wrinkle ridges). Along-strike orientations of these thrust and strike-slip faults reveal the Tharsis-radial stress to be the area's most compressive remote principal stress and that this stress orientation and magnitude persisted throughout the Late Hesperian to the Middle Amazonian. We show that the change in the predominant style of faulting from thrust faulting to strike-slip faulting during this time requires a decrease of the Tharsis-circumferential compressive stress to a magnitude less than lithostatic load, with negligible change in stress orientation.     

Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan

The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.     

冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.     

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.