烟台市套子湾污水处理厂排海管道有关参数的确定

利用海洋处置城市污水是沿海地区一种把海洋水体的环境容量和自净能力用于环保的可行方法。烟台市套子湾污水处理厂1998年10月建成正式投入运转,日处理能力为25万m3,其污水排海管道工程是该厂重要组成部分,对污水排海管道的有关参数进行计算,可供沿海城市污水处理工程参考。     

海涂围垦工程中悬挂式爆破挤淤基础处理技术探讨

沿海软土地基围涂工程中悬挂式爆破挤淤基础处理断面结构设计中遇到的最大难题是对腰宽的处理,腰宽太窄则工后沉降大,反之,则断面石方量增大,投资增加,因此,试图通过工程实例说明悬挂式爆破挤淤基础处理断面设计及工程实施过程中遇到的问题及对策措施。     

贝类净化技术研究现状与展望

随着养殖水域环境问题日益凸显,贝类食品安全问题越来越受到重视,贝类在进入流通环节前进行净化将成为不可缺少的处理环节.本文从贝类净化工艺类型、净化用水处理技术,以及贝类净化对风味的影响等方面对当前国内外研究进展进行了总结梳理,并提出下一步贝类净化应重点解决的问题,为深入开展贝类净化相关研究提供参考.     

四川省九龙县地质灾害形成机制及防治对策研究

九龙县地质灾害众多,灾害类型主要以滑坡、崩塌、泥石流为主.地质灾害一直是多年来制约当地经济发展、威胁人民生命财产安全的主要因素.本文在实地调查的基础上,经过分析总结,对地质灾害的类型、数目、分布特征等做出了详细的论述.同时通过研究论证得出了九龙县地质灾害形成的主要控制因素和主要诱发因素.最后,针对九龙县的具体情况,提出了可行的防治对策.     

强夯密实处理块碎石填料试验研究

在高填方工程中,压实质量是工程成败的关键因素。强夯法所具有的优点,使其在许多地基处理工程中都有广泛的应用。某山区高填方工程,根据工程的实际需要,采用强夯法对山体爆破块碎石填料进行密实处理。为此,开展现场试验研究。首先对爆破的块碎石填料进行了颗粒分析试验和压实试验,分析其可填性和压实特征。按照试验参数和工序,分别进行了2000kNm、3000kNm单点夯试验;同时夯后进行了密实度试验、颗粒分析试验。由此,确定了合理的强夯施工参数。最后根据面层载荷试验的检测,以此确定的施工参数在该工程取得了良好的处理效果。     

打桩振动对周围环境的影响

在城市建筑物密集区进行振动沉管施工,引起震动对周围环境的影响已成为地基处理施工中一个突出的问题,通过对某项工程水泥粉煤灰碎石柱(CFG)桩施工振动对周边建筑物影响的测试和分析,对地基处理方法的选型及如何有效减轻和控制施工振动对周围环境的影响,均具有一定意义。     

In situ stress field of eastern Australia

New in situ data based on hydraulic fracturing and overcoring have been compiled for eastern Australia, increasing from 23 to 110 the number of in situ stress analyses available for the area between and including the Bowen and Sydney Basins. The Bowen Basin displays a consistent north‐northeast maximum horizontal stress (σ_H) orientation over some 500 km. Stress orientations in the Sydney Basin are more variable than in the Bowen Basin, with areas of the Sydney Basin exhibiting north‐northeast, northeast, east‐west and bimodal σ_H orientations. Most new data indicate that the overburden stress (σ_V) is the minimum principal stress in both the Bowen and Sydney Basins. The Sydney Basin is relatively seismically active, whereas the Bowen Basin is relatively aseismic. Despite the fact that in situ stress measurements sample the stress field at shallower depth than the seismogenic zone, there is a correlation between the stress measurements and seismicity in the two areas. Mohr‐Coulomb analysis of the propensity for failure in the Sydney Basin suggests 41% of the new in situ stress data are indicative of failure, as opposed to 13% in the Bowen Basin. The multiple pre‐existing structural grains in the Sydney Basin further emphasise the difference between propensity for failure in the two areas. Previous modelling of intraplate stresses due to plate boundary forces has been less successful at predicting stress orientations in eastern than in western and central Australia. Nonetheless, stress orientation in the Bowen Basin is consistent with that predicted by modelling of stresses due to plate boundary forces. Variable stress orientations in the Sydney Basin suggest that more local sources of stress, such as those associated with the continental margin and with local structure, significantly influence stress orientation. The effect of local sources of stress may be relatively pronounced because stresses due to plate boundary forces result in low horizontal stress anisotropy in the Sydney Basin.     

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

对蓬安县三元水库大坝外坡裂缝产生的原因及整治工程的探讨

本文通过对蓬安县三元水库大坝外坡裂缝产生的原因分析，进而运用岩、土力学的理论与方法反算推论出了裂缝的产生不是深层坝体土滑动引起的，而是局部浅层坝体土在水的诱发作用下作蠕滑-拉裂变形所产生的。在明确了大坝裂缝产生的原因后，提出了一系列相应整治工程措施，以达到彻底根治裂缝和稳固大坝的目的。