Ca-rich Garnet-Clinopyroxene Rocks at Hujialin in the Su-Lu Terrane (Eastern China): Deeply Subducted Arc Cumulates?

Layers of Ca-rich garnet–clinopyroxene rocks enclosedin a serpentinite body at Hujialin, in the Su–Lu terraneof eastern China, preserve igneous textures, relict spinel ingarnet, and exsolution lamellae of Ca-rich garnet, ilmenite/magnetite,Fe-rich spinel, and also amphibole in clinopyroxene. In termsof their major and trace element compositions, the studied samplesform a trend from arc cumulates towards Fe–Ti gabbros.Reconstructed augite compositions plot on the trend for clinopyroxenein arc cumulates. These data suggest that the rocks crystallizedfrom mantle-derived magmas differentiated to various extentsbeneath an arc. The Ca-rich garnet + diopside assemblage isinferred to have formed by compressing Ca-rich augite, whereasthe relatively Mg-rich cores of garnet porphyroblasts may haveformed at the expense of spinel. The protolith cumulates weresubducted from near the crust–mantle boundary (c. 1 GPa)deep into the upper mantle (4·8 ± 0·6 GPaand 750 ± 50°C). Negatively sloped P–T pathsfor the garnet–clinopyroxene rocks and the corollary ofcorner flow induced subduction of mantle wedge peridotite arenot supported by the available data. Cooling with, or without,decompression of the cumulates after the igneous stage probablyoccurred prior to deep subduction. KEY WORDS: arc cumulates; Ca-rich garnet; garnet–clinopyroxene rocks; Su–Lu terrane; UHP metamorphism     

藏南地区金和锑矿床(点)类型及其时空分布特征

本文首次对藏南地区金和锑矿床(点)地质特征、成因类型和空间分布特点进行了总结，对金和锑成矿作用与中新生代构造一岩浆活动的关系进行了论证，对区域地壳演化过程中金和锑成矿动力学机制进行了讨论。该区的金和锑矿床(点)可按容矿围岩划分为：①变质岩为主要容矿围岩矿床(点)，包括金和金一锑矿床(点)；②沉积岩为主要容矿围岩矿床(点)，包括金、锑、金一锑和锑多金属矿床(点)；③火山岩为主要容矿围岩矿床(点)，以金一银矿床为代表。根据金和锑矿床(点)空间分布特点和地质特点，将本区划分为4个矿化集中区：拉昂错一马攸木一帕羊金矿化集中区(A)，然勒金和锑矿化集中区(B)，洛扎一措美锑矿化集中区(C)和邛多江金一锑矿化集中区(D)。各矿化集中区内大多数金和锑矿床(点)与燕山晚期～喜马拉雅早期富碱火成岩具密切时空分布关系，它们是古板块对接碰撞期和碰撞期后大规模构造一岩浆活动的产物。近东西向挤压性和南北向张性断裂交汇部位以及富碱火成岩发育区是寻找金和锑矿床(点)的有利场所。     

裂缝性岩石裂缝扩展的光弹构造物理模拟——以南华北盆地户部寨沙河阶组为例

以南华北盆地户部寨第三系沙河阶组粉砂岩低渗透储层为例,总结了其中发育的5种类型构造裂缝组合,即:①南北向雁形张节理组成的共轭剪节理带;②东西向雁形张节理组成的共轭剪节理带;③缠结状多组剪切构造裂缝;④组合状交切的多组剪切构造裂缝及张裂缝;⑤散状无序排列的构造裂缝。在此基础上,建立光弹性试验构造物理模型,沿现应力场96°方向,均匀地对该模型逐步增加外载力。结果表明,沿各组合裂缝尖端分别形成对称于裂缝走向、且主轴垂直于裂缝的Ⅰ型等色线条纹;对称于裂缝走向、且主轴平行于裂缝走向的Ⅱ型条纹和斜交于裂缝走向的复合型(Ⅲ型)条纹。第①类组合裂缝尖端以Ⅰ型等色线条纹的拉张应力和张剪应力为主;第②类组合裂缝尖端以复合型(Ⅲ型)等色线条纹的挤压应力为主;第③、④和⑤类组合裂缝尖端的应力分布较为复杂。当模型外载荷接近1000kg时,裂缝尖端起裂,并开始发育显微裂缝,而当外载荷达1100-1200 kg时,沿裂缝尖端部位形成宏观裂缝,并开始扩展。5种类型的裂缝组合扩展发育程度由强至弱依次为:①,③,⑤,②,④。其中第①类共轭裂缝组合起裂最早,扩展最快,裂缝间的连通趋势最好,说明规则分布的构造裂缝组合,在垂直于外施加载衙时更易达到连通的目的。     

利用钻孔超声成像的图像特征进行岩石风化程度分类

钻孔超声成像方法能精确地反映井壁的光滑情况, 进而判断岩石的风化发育程度, 确定风化层的厚度。阐述了钻孔超声成像的走时和振幅图像特征, 给出了1个在香港地区的应用实例。     

河南焦作云台山早前寒武纪变质基底锆石SHRIMP U-Pb年龄

应用离子探针技术,对华北太行山南缘钾长石化长英质副片麻岩和钾长石化片麻状奥长花岗岩进行了锆石年龄测定。钾长石化长英质副片麻岩的变质原岩为泥砂质碎屑沉积岩,其形成时代很可能为新太古代。碎屑锆石普遍存在强烈铅丢失,靠近上交点的5个数据点207Pb/206Pb加权平均年龄为3399Ma±8Ma,代表了物源区组成的时代。钾长石化片麻状奥长花岗岩2组锆石207Pb/206Pb加权平均年龄分别为2511Ma±13Ma(岩体形成时代)和2735Ma±16Ma(残余锆石年龄),分别代表该岩体形成时代和残余锆石年龄。新的资料支持了华北克拉通中部造山带太古宙地质体与其东部陆块存在亲缘关系的认识。     

苏鲁超高压变质岩区深部流体He-Ar的系统关系：中国大陆科学钻探工程在线流体监测的解析

中国大陆科学钻探工程在线监测从泥浆中分离出的气体地球化学组成揭示了一段重要的气体异常,从2004年12月24日夜里开始到12月29日晚上结束。从12月10日到24日晚上11点30分的气体的Ar、He和N2基本上沿着趋势A分布,而12月26日早上7点半到29日晚上7点半的数据沿趋势C分布。相对于趋势A,趋势C中的气体含有相对升高的Ar,Ar/He和Ar/N2的平均值分别为3653和0.0142,明显高于空气的比值1800和0.0119。趋势A中的气体的Ar/He和Ar/N2比值分别围绕1851和0.0118变化,其中的Ar/He比值稍微高于空气的比值,但Ar/N2比值近似于空气比值,表明背景地下流体含非常低的Ar,而He和N2主要是大气组分。在趋势A和趋势C之间的数据(时间段B)具有和空气接近的Ar/N2比值,但平均Ar/He比值为3265,明显高于空气比值,反映了该段气体具有相对亏损的He。苏鲁-大别山地区的热年代学研究已经表明云母和角闪石的Ar/Ar的冷却年龄大大地高于磷灰石或锆石的He的冷却年龄,说明Ar在超高压变质地体折返早期就已封闭,而He一直保持开放状态,直到超高压变质岩接近地表。这种Ar和He对温度变化的不同反应,导致大部分的He在超高压岩石折返过程中脱气并释放到空气中,Ar则相对圈闭在固体岩石或封闭的断裂带中。在He-Ar的系统关系上,表现为来自于超高压岩石或断裂带中的流体具有富集Ar、亏损He及升高的Ar/He比值。气体组分从趋势A向趋势C的骤然跳跃,反映了地下流体组分的强烈变化,即具有相对富集Ar的深部流体的贡献大大增强。     

地质雷达及浅层地震在泥质粉砂岩中断裂带上的曲线特征

探讨了如何利用地质雷达及浅层地震有关原理判释泥质粉砂岩中隐伏断裂带的性质和特征。主要的工作方法是通过现场实测，分析地质雷达反映在张性断裂带和压性断裂带上的曲线特征，分析浅层地震相遇时距曲线在断裂带上的曲线特征。后者的主要特征有：（1）在断裂带上初至时间延长；（2）在断裂带上左右支时距曲线上下跳动的幅度均等；（3）在断裂带上跳动的长度不一；（4）在断裂带左右支时距曲线上下跳动或反相；（5）时距曲线呈喇叭口。阐明了地质雷达和浅层地震的原理及其在泥质粉砂岩中勘查断裂构造的效果     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。     

The gravity method in groundwater exploration in crystalline rocks: a study in the peninsular granitic region of Hyderabad, India

The application of variations in the earth's gravity in groundwater exploration on a regional scale, especially in sedimentary basins, metamorphic terrains, valley fills, and for buried alluvial channels, is well established. However, its use in hard crystalline rocks is little known. In granite, for example, the upper weathered layer is a potential primary aquifer, and the underlying fractured rock can form a secondary aquifer. Fracturing and weathering increases the porosity of a rock, thereby reducing the bulk density. Changes in gravity anomalies of 0.1–0.7 mGal for granites, due to weathering or variations in lithology, can be detected. To test the use of gravity as a groundwater exploration tool for crystalline rocks, a gravity survey of the peninsular shield granites underlying Osmania University Campus, Hyderabad, India, was undertaken. At the site, gravity anomalies reflect variations in the lithology and in the thickness of weathered zones. These anomalies also define the position of intrusives and lineaments. Areas of more deeply weathered granite that contain wells of higher groundwater yield are represented by negative gravity values. In the weathered zone, well yield has an inverse relation to the magnitudes of residual gravity. The study confirms the feasibility of gravity as a tool for groundwater exploration in crystalline rocks. Electronic Publication     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.