Strain accumulation in sand due to cyclic loading: drained triaxial tests

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.     

ASSESSING THE SUITABILITY OF THE EPIC CROP MODEL FOR USE IN THE STUDY OF IMPACTS OF CLIMATE VARIABILITY AND CLIMATE CHANGE IN WEST AFRICA

The EPIC (Erosion Productivity Impact Calculator) crop model, developed by scientists of the United States Department of Agriculture (USDA), has been successfully applied to the study of erosion, water pollution, crop growth and production in the US but is yet to be introduced for serious research purposes in other countries or regions. This paper reports on the applicability of the EPIC 8120 crop model for the assessment of the potential impacts of climate variability and climate change on crop productivity in sub‐Saharan West Africa, using Nigeria as the case study. Among the crops whose productivity has been successfully simulated with this model are five of West Africa's staple food crops: maize, millet, sorghum (guinea corn), rice and cassava. Thus, using the model, the sensitivities of maize, sorghum and millet to seasonal rainfall were demonstrated with coefficients of correlation significant at over 98 per cent confidence limits. The validation tests were based on a comparison of the observed and the model‐generated yields of rice and maize. The main problems of validation relate to the multiplicity of crop varieties with contrasting performances under similar field conditions. There are also the difficulties in representing micro‐environments in the model. Thus, some gaps appear between the observed and the simulated yields, arising from data or model deficiencies, or both. Based on the results of the sensitivity and validation tests, the EPIC crop model could be satisfactorily employed in assessing the impacts of and adaptations to climate variability and climate change. Its use for the estimation of production and the assessment of vulnerabilities need to be pursued with further field surveys and field experimentation.     

Fractionation mechanism of stable isotope in evaporating water body

Under Rayleigh equilibrium condition, stable isotopic ratio in residual water increases with the decrease of the residual water proportion f exponentially, and the fractionation rate of stable isotopes is inversely proportional to temperature. However, under kinetic evaporation condition, the fractionation of stable isotopes is not only related to the phase temperature but also influenced by the atmospheric humidity and the mass exchange between liquid and vapor phases. The ratio δ in residual water will not change with f after undergoing evaporation of a long time for great relative humidity. The rate that the evaporating water body reaches isotopic steady state is mainly dependent on the relative humidity in atmosphere. The analysis shows that the actual mean linear variety rates, about -30.0, of the δ18O in residual water versus the residual water proportion at Nagqu and Amdo stations are consistent with the simulated process under temperature of 20 oC and relative humidity of 50%. The distillation line simulated under Rayleigh equilibrium condition is analogous to the global meteoric water line (MWL) as the temperature is about 20 oC. Under non-equilibrium condition, the slope and constant values of distillation line are directly proportional to temperature and relative humidity. According to the basic data, the simulated distillation line is very consistent with the actual distillation line of Qinghai Lake.     

Transport rate of calcareous sand in unidirectional flow

This paper examines the transport of calcareous sand in unidirectional flow and its prediction through existing sediment transport models. A flume experiment of four sand samples collected on Oahu, Hawaii, provides 29 sets of sediment transport data in the bed-form and suspended transport stages. The measured transport data are compared with direct predictions from four energy-based transport models developed for siliceous particles. Corrections for the grain-size, fall velocity, and critical velocity of calcareous sand based on recent research are applied to the models and the results are compared with the direct calculations and measured data. The comparison illustrates the important role particle shape plays in the transport of calcareous sand. All four sediment transport models give consistent predictions and good agreement with the majority of the measured data. Two of the models respond positively to the corrections in both the bed-form and suspended transport stages indicating that such an approach may provide an interim solution for the transport of calcareous sand.     

From the geological to the numerical model in the analysis of gravity-induced slope deformations: An example from the Central Apennines (Italy)

This paper presents the findings from a study on gravity-induced slope deformations along the northern slope of Mt. Nuria (Rieti-Italy). The slope extends from the village of Pendenza to the San Vittorino plain and hosts the Peschiera River springs, i.e. the most important springs of the Central Apennines (average discharge: about 18 m³/s).

Detailed geological-geomorphological and geomechanical surveys, supported by a site stress-strain monitoring system and laboratory tests, led us to define the main evolutionary features of the studied phenomena. Based on the collected data, a “geological-evolutionary model” was developed with a view to identifying a spatio-temporal correlation between relief forms, jointing of the rock mass and its stress conditions. The geological-evolutionary model was expected to improve numerical simulations and to test our assumptions.

The numerical model also allowed us to simulate changes in the stress-strain conditions of the rock mass and correlate them with jointing, seepage, as well as with site-detected and site-monitored forms and deformations. In particular, significant relations between seepage, tensile stresses within the rock mass, karst solution and collapse of cavities were identified.     

On size and boundary effects in scaled model blasts spatial problems

This paper addresses size and boundary effects on wave propagation, fracture pattern development and fragmentation in small scale laboratory-size specimens for model blasting. Small block type specimens are centre-line loaded by linear explosive charges and supersonically detonated. Using elastic wave propagation theory and fracture mechanics it is shown that the type of boundary conditions which prevail at the outer boundary of the cylinder control the extension of bore-hole cracking and fragmentation within the body of the cylinder. In the case of a composite block where a cylindrical core of different material is embedded, the level of fracturing and fragmentation is controlled by the separation of the interface which in turn depends on the relative dimensions of the core and the block. The most important parameter is the ratio between the length of the pulse (space-wise or time-wise) and the characteristic dimensions of the models, i.e. in this case the dimensions of the core and the mantel. Stress wave superposition effects occur in the corner sections of the mantel. Theoretical results are in good agreement with recent experimental findings.     

Development of an integrated conceptual model for the rational management of the transboundary Nestos River, Greece

This paper provides a detailed analysis of the geologic, hydrologic and hydrogeologic characteristics of Nestos River basin, which is formed within the Greek mountainous part of the river. The quantitative analysis was mainly based on the data of the river flow in different gauging points across the rivercourse as well as on the data of groundwater discharge from karst springs of the mountainous area while important conclusions were made regarding the hydraulic connection between the surface waters of the river and the groundwater of the karst aquifers of the basin. The qualitative analysis has shown that the quality of both surface waters and groundwaters of the investigated basin is high, whereas, no sources of contamination were indicated during this research. The possible effects of the two large dams of Platanovrisi and Thesavros are also analysed as they strongly affect the quantitative and qualitative regime of the river delta.     

Assimilation and Fractional Crystallization Controlled by Transport Process of Crustal Melt: Implications from an Alkali Basalt-Dacite Suite from Rishiri Volcano, Japan

Mechanisms of fractional crystallization with simultaneous crustalassimilation (AFC) are examined for the Kutsugata and Tanetomilavas, an alkali basalt–dacite suite erupted sequentiallyfrom Rishiri Volcano, northern Japan. The major element variationswithin the suite can be explained by boundary layer fractionation;that is, mixing of a magma in the main part of the magma bodywith a fractionated interstitial melt transported from the mushyboundary layer at the floor. Systematic variations in SiO₂ correlatewith variations in the Pb, Sr and Nd isotopic compositions ofthe lavas. The geochemical variations of the lavas are explainedby a constant and relatively low ratio of assimilated mass tocrystallized mass (‘r value’). In the magma chamberin which the Kutsugata and Tanetomi magmas evolved, a strongthermal gradient was present and it is suggested that the marginalpart of the reservoir was completely solidified. The assimilantwas transported by crack flow from the partially fused floorcrust to the partially crystallized floor mush zone throughfractures in the solidified margin, formed mainly by thermalstresses resulting from cooling of the solidified margin andheating of the crust. The crustal melt was then mixed with thefractionated interstitial melt in the mushy zone, and the mixedmelt was further transported by compositional convection tothe main magma, causing its geochemical evolution to be characteristicof AFC. The volume flux of the assimilant from the crust tothe magma chamber is suggested to have decreased progressivelywith time (proportional to t^–1/2), and was about 3 x 10^–2m/year at t = 10 years and 1 x 10^–2 m/year at t = 100years. It has been commonly considered that the heat balancebetween magmas and the surrounding crust controls the couplingof assimilation and fractional crystallization processes (i.e.absolute value of r). However, it is inferred from this studythat the ratio of assimilated mass to crystallized mass canbe controlled by the transport process of the assimilant fromthe crust to magma chambers. KEY WORDS: assimilation and fractional crystallization; mass balance model; magma chamber; melt transport; Pb isotope