虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。     

The simultaneous use of piles and prestressed anchors in foundation design

The paper presents a simplified design procedure to evaluate the loads in piles and prestressed anchors when simultaneously used in foundations under tension loads and high overturning moments. Although involving some necessary simplifications for the sake of design, the procedure keeps the main features of load transfer from piles and anchors to the surrounding soil. The approximate method has been adopted by the authors in relevant projects in Brazil, whose long term satisfactory performance indicates its appropriate performance. Two practical examples have been selected to illustrate the application of the proposed method. It is shown that anchor prestressing plays an important role in limiting tension loads on the piles and controlling foundation eccentricity. The importance of monitoring for replacement of occasional prestress losses to prevent long-term pile overstressing is illustrated.     

Modeling of Beams on Reinforced Granular Beds

The paper describes a mechanical model for estimating the flexural response of a strip footing, supporting a column (imposing a concentrated load), resting on a compacted granular bed overlying a reinforcement layer for example, geogrids, geomats etc. below which lies a loose soil deposit. The footing is idealized as a beam and the reinforcing element is assumed to have finite bending stiffness and negligible frictional resistance. The upper and lower soil layers are idealized by a series of linear and discrete springs (Winkler springs) of different stiffness values. To find the response of such a model the governing differential equations have been derived and expressed in a nondimensional form. A closed form analytical solution of the same has been obtained subjected to appropriate boundary conditions. Using the present approach the resulting solution for a degenerated case of a long beam is found to be identical to the same of Hetenyi (1946, Beams on elastic foundations, University of Michigan press, Ann Arbor, MI). Parametric studies reveal that the ratio of flexural rigidity of upper and lower beam and the ratio of stiffness of the upper and lower soil layers affect significantly the response of the foundation.     

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.     

大吨位基桩抗压载荷试验中的锚桩预应力保护技术

竖轴向承载力是桩基础设计的重要参数,现场静载试验是目前确定桩基承载力的主要手段之一。本文依托黄陵延安段高速公路洛河特大桥试桩工程,通过对原有工程桩施加预应力,形成了以工程桩为锚桩的锚拔体系。加载过程中试桩应力、锚桩应力及桩顶位移测试,结果表明,结合预应力技术,以工程桩作为锚桩构成桩基础静载试验的锚拔体系是可行的,同时提出了施加预应力大小的原则、方法以及确保后期曾作为锚桩的工程桩有足够承载能力应采取的必要措施。     

新近沉积粉细砂层地基的试验与评价

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。     

皖中泥质岩工程性质探讨

历来对半胶结泥质岩风化等级划分都带有许多主观性,从而影响提承载力,有的规范要求可不对半胶结岩石进行风化程度划分,但有时要对这些岩石进行工程地质细分,从而准确确定各分层的承载力与摩阻力。统计了合肥、六安、淮南、安庆地区等大量实践资料,用标准贯入击数、重型圆锥触探实验击数等原位测试手段来划分泥质岩风化等级,并对泥质岩的承载力与摩阻力等工程地质性质做出了评价。     

Reliability Based Assessment of Shallow Foundations Using Mathcad

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.     

QTPV Data Model and Algorithm and Its Application to Geological Exploration Engineering

3D spatial data model and simulating are the core of 3D GIS can be adopted in different domains. A data model based on Quasi Tri-Prism Volume (QTPV) has been proposed. QTPV definition and its special cases have been discussed. Using QTPV and its special cases, irregular natural geological bodies and regular subsurface engineering can be described efficiently. The proposed model is composed of five primitives and six objects. Data structures and topological relationship of the fives primitives and three objects describing stratigraphy are designed in detail Some schemes are designed for the QTPV modelling of stratigraphy and subsurface engineering according to modelling data. The model manipulation method of QTPV cutting by an arbitrary plane is discussed. Using VC 6.0 programming language integrated with SQL database and OpenGL graphic library under windows environment, a system prototype 3DGeoMV has been developed. The experiment result shows that the QTPV model is feasible and efficient in modelling subsurface engineering.     

人为土的概念、特征及其工程研究意义

本文提出了人为土的工程概念,从其成因的角度给出了人为土明确的科学定义,归纳和总结了人为土的基本特征,为人为土的工程分类体系建立、合理评价、工程利用和环境整治提供科学依据。