基于钻孔数据的三维地质建模与可视化研究

三维地质模型能够完整准确地表达复杂地质现象的边界条件及地质体内含的各种地质构造,直观地再现地质单元的空间展布及其相互关系,最大限度地提高地质分析的直观性和准确性,因此三维地质建模已引起地质、采矿、岩土工程等诸多领域的日益重视。笔者在综合考察多种建模方法的基础上,结合工程实践,提出了一种实用的工程地质三维建模实施方法。该方法以钻孔资料和地质剖面数据为三维地质建模的源数据,允许用户手工修正模型剖面地层分界线,从而实现对建模过程的干预和控制,克服了单纯依靠钻孔数据建模结果不精确且难以修正的问题。最后,通过一个研究实例展示了该方法的实际建模效果。     

山西省太谷县地质灾害及防治

太谷县地质构造条件复杂,地质灾害破坏严重,随着地区的经济发展,其城镇建设与地质灾害之间的矛盾日益突出。调查显示,太谷县发育地质灾害92处,区内地裂缝占灾害点总数46．7％,主要发育于平原区;不稳定斜坡占灾害点总数32．6％,滑坡占灾害点总数12．0％,且80％为土质滑坡;泥石流以沟谷型为主,占灾害点总数5．4％;崩塌占灾害点总数3．3％。论文研究了区内地质灾害的基本发育特征及其诱发因素。依据地质灾害防治评估划分原则,对不同类型地质灾害按轻、重、缓、急进行分期防治,对重要地质灾害采取具有针对性的工程措施治理。结合地质灾害调查分析,提出了建立群测群防网络、因地制宜、因灾设防等防治对策,为增加防灾减灾效益、环境效益及经济效益提供有力的保证。     

广西佛子冲铅锌矿田成岩成矿时代研究

广西佛子冲铅锌矿田位于桂东南博白-岑溪多金属成矿带的NE端,区内发育燕山期花岗岩、花岗闪长岩、二长花岗斑岩和英安质凝灰熔岩等;其中花岗闪长岩和二长花岗斑岩与铅锌成矿关系密切,成矿岩体形成时代分别为156Ma和127Ma。     

平山县泥石流的形成特征和机理分析

平山县是河北省太行山区主要泥石流地质灾害频发区,每年7～8月份强降雨期间,沟谷源头侧壁岩土体在雨水的浸泡下失稳破坏,形成崩塌与滑坡,崩滑的岩土体与沟源洼地中积聚的洪水迅速混合形成泥石流。本文认真分析了该区泥石流的分布概况,研究了泥石流灾变的形成特征,并从泥石流形成的物源条件和动力条件两方面分析了泥石流发生的机理和崩滑转化机制。     

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.     

山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。     

膜分离技术的应用及发展趋势

综述世界和中国膜分离技术的发展，并对膜分离技术的基本特性、技术特点、膜材料、分类及膜分离装置进行了简单介绍；并介绍了膜分离法在化工及石油工业、食品工业、医药工业和医疗设备、生物技术和环境工程中的应用，并分析了膜分离技术将会在膜材料、新的膜过程和集成膜过程3个方面的发展趋势。同时指出如果能解决膜产品的价格、膜污染和膜分离性能的提高这3个膜的制约因素，膜分离技术将在人类社会的发展史上起到不可替代的作用。     

环境矿物材料治理镉（Cd^2＋）污染研究进展

近年来,环境矿物材料以其经济、有效、无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多优势,可替代传统的镉污染处理方法。本文综述了国内外环境矿物材料在处理镉污染方面的研究进展,并对今后应用环境矿物材料治理镉污染提出了一些建议。