大别山双河和碧溪岭超高压变质岩流体包裹体研究

对大别山双河和碧溪岭含柯石英榴岩和硬玉石英岩进行了详细的流体包裹体研究。根据流体包裹体的成分和盐度的不同,可以划分出至少五种类型不同的气液包裹体;（１）Ｎ２包裹体;（３）高盐度流体包裹体;（３）ＣＯ２包裹体;（４）ＣＯ２－Ｈ２Ｏ包裹体;（５）低盐度流体包裹体。本仅见于含柯石英榴辉岩,而高盐度流体包裹体则几乎存在于所有的榴辉岩和硬玉石英岩中。ＣＯ２包裹体沿榴辉岩中微剪切带分布,或存在于强变形的硬玉石     

Evolution of Ore-Forming Fluids and Ag-Cu Polymetal Mineralization in the Lanping Basin, Yunnan

EVOLUTION OF ORE-FORMING FLUIDS AND Ag-Cu POLYMETAL MINERALIZATION IN THE LANPING BASIN, YUNNAN“KeyProjectforResourcesandEconomics” (95 0 2 0 0 1 0 1)oftheMinistryofLandResources     

变质流体作用的元素地球化学研究

变质流体作用是变质岩－流体体系的重要地质作用过程，可以通过有效的地质地球化学方法揭示，综述了变质流体作用的地球化学研究进展，主要包括：流体包裹体，同位素和元素地球化学等方面，强调了元素地球化学研究对于示踪变质流体作用过程的重要性。     

成矿流体演化与成矿物理化学

成矿流体是富含挥发分 (CO2 、CH4等 )是具有较高含盐度的特殊地质流体。本文讨论了在流体演化过程中挥发分的来源 ,指出主要来自水岩作用、有机质分解及地幔去气和岩浆 ;碱金属及卤素同样具有多来源的性质 ,以海水、含盐系淋滤、建造水为主要来源 ,含盐系重熔可以形成富含碱金属的成矿流体。流体演化过程中氢氧同位素、硫同位素的分馏主要与温度、水岩比值或硫源丰度有关。一个重要的结论是 ,成矿流体的形成主要与地质作用有关 ,而流体来源是次要的。海底热水流体的地球化学特征以高δ3 4 S值、中稀土富集及正铕异常为特征。本文总结了热水流体成矿物理化学条件 ,指出水热流体物相点 :1) 10 80℃ ,7.5× 10 8Pa水溶液与硅酸岩熔浆分熔点 ;2 )水溶液的第二个临界点是气水溶液的超临界点 (374.15℃ ,2 .2 1× 10 7Pa) ;3)水溶液的沸点 (≥ 10 0℃ ,≥ 1× 10 5Pa) ;4)水溶液的冰点 (≤ 0℃ ,1× 10 5Pa) ;5 )H2 O CO2 体系的不混溶温度点 (2 6 6℃ ,2 .15×10 8Pa[1 3 ] 等是重要的成矿相变点。     

Characteristics of boundary fault systems and its hydrocarbon controlling on hydrocarbon accumulation in Awati Sag,Tarim Basin,China

Based on the interpretation of two-dimensional seismic data, this paper analyzes the characteristics of three boundary fault systems including the Shajingzi fault, the Aqia fault and the Tumuxiuke fault around the Awati sag of the Tarim Basin, and studies its controlling on hydrocarbon accumulation. Neotectonic movement is ubiquitous in oil and gas bearing basins in China, such as Neogene intense activities of large boundary thrusting faults of the Awati sag: Shajingzi fault, Aqia fault and Tumuxiuke fault. Based on a large number of seismic data, it is showed that they have section wise characteristics in the direction of fault strike, and active periods and associated structures formed of different sections are different. Usually, large anticlinal structures are formed in the upper wall, and faulted anticline controlled by companion faults are formed in the bottom wall. Large faults cut the strata from Cambrian up to Neogene. For the anticline in the upper wall, fault activities caused by neotectonic movement played a destructive role in hydrocarbon accumulation, thus the preservation condition is critical for reservoir formation. In this sense, attention should be paid to formations in the upper walls of Aqia fault and Tumuxiuke fault under the Cambrian salt bed, whose plastic deformation could help to heal faults. Companion faults in the bottom wall cut down to the Cambrian and up to the Triassic serving as the pathway for hydrocarbon migration, and associated structures in the bottom wall are noteworthy exploration targets.©2019 China Geology Editorial Office.     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

武夷山西麓宁都地区基底褶皱构造式样初步探讨

武夷山西麓宁都地区广泛分布一套成层有序的晚元古代浅变质岩系,长期以来被视为单斜构造。本文阐述了研究区基底褶皱的窨配置及褶皱式样,阐明了研究区的各紧密线状复式褶皱隶属区域大型复背斜的北翼,同时地基底褶皱的形成机制与后期改造作了地一步分析和探讨。     

陕西八卦庙金矿床NE向黄铁矿-石英成矿期成矿物质来源和成矿机制探讨:原位硫同位素证据

八卦庙金矿床位于秦岭造山带凤太铅锌多金属矿田北部,是陕西省规模较大的金矿床之一,已探明金储量约106 t.赋矿围岩是上泥盆统星红铺组浅变质泥质碎屑岩和碳酸盐岩,其成矿过程可划分为3期,分别是①顺层磁黄铁矿-石英成矿期;②NE向黄铁矿-石英成矿期;③裂隙硫化物-方解石成矿期.目前关于NE向黄铁矿-石英成矿期成矿物质来源和...     

浅论赣北九瑞铜金矿集区的资源潜力

九瑞矿集区是长江中下游铜金成矿带的重要组成部分.数十年来,几代地质和矿山工作者为探明其矿产资源,作出了不懈的努力,取得了巨大成果.但近年来,随着勘探难度的加大,该区矿床勘查和研究处于"半停滞"状态.文章运用前人的科研资料,结合近期的工作成果,用"铜金矿集区"的概念和观点,阐述了矿集区的特征,总结了其控矿因素和成矿规律,分析了九瑞铜金矿集区的成矿系统和资源潜力.     

楚雄盆地洒芷油砂地质特征及成藏模式

楚雄盆地洒芷油砂矿位于元谋隆起西部边缘洒芷背斜上。洒芷油砂充填在上三叠统舍资组-干海资组砂岩孔隙和裂隙中，油砂多层分布，厚度变化大。通过薄片分析确定，储集层砂岩有效面孔率为9．13％～12．66％，结构成熟度和成分成熟度中等，储层次生孔隙和裂缝发育。湖相三角洲平原分流河道和三角洲前缘河口坝砂体为有利储层。洒芷油砂是古油藏经历燕山期和喜山期多次强烈构造活动改造而形成，成藏模式可以概括为：成藏-抬升氧化-埋深再成藏-热变质-抬升再氧化。