Land management impacts on runoff sources in small Amazon watersheds

Forest clearing and conversion to cattle pasture in the lowland Amazon region has been linked to soil compaction and increased soil water storage, which combine to diminish soil infiltration, enhance quick lateral flows and increase the stream flow response to precipitation. Quantifying the importance of quick surficial flow in response to this land use change requires identification of water sources within catchments that contribute to stream flow. Using an end member mixing analysis approach, potential contributing sources of stream flow were evaluated during an entire rainy season in a forest and a pasture watershed drained by ephemeral‐to‐intermittent streams in the south‐western Amazon. Water yield was 17% of precipitation in the pasture and 0·8% of precipitation in the forest. During the early rainy season, throughfall, groundwater, and soil water contributed 79%, 18%, and 3%, respectively, to total forest stream flow. Over the entire rainy season, throughfall, groundwater, and shallow soil water provided 57%, 24%, and 19%, respectively, of stream flow. In the pasture watershed, overland flow dominated stream flow both in the early (67%) and late (57%) rainy season, with a mean contribution of 60% overland flow, 35% groundwater, and 5% soil water. The uncertainty associated with those estimates was studied using a Monte Carlo approach. In addition to large changes in total surface flow, marked differences were found in the proportions of total stream flow in the second half of the rainy season between the forest and pasture watershed. These results suggest that (1) there is great potential for alteration of the hydrological budgets of larger watersheds as the proportion of deforested land in the Amazon increases, and (2) as more rainfall is diverted into fast flowpaths to streams in established pastures, the potential to deliver water with higher solute concentrations generated by erosion or by bypassing sites of solute removal increases. Copyright © 2007 John Wiley & Sons, Ltd.     

Changes in stream water quality due to logging of the boreal forest in the Montmorency Forest,Québec

Summer stream water quality was monitored before and following the logging of 50% of the boreal forest within three small watersheds (<50 ha) nested in the ‘Ruisseau des Eaux‐Volées’ Experimental Watershed, Montmorency Forest (Québec, Canada). Logging was conducted in winter, on snow cover according to recommended best management practices (BMPs) to minimize soil disturbance and protect advance growth. A 20‐m forest buffer was maintained along perennial streams. In watershed 7·2, cut‐blocks were located near the stream network and logging was partially allowed within the riparian buffer zone. In watersheds 7·5 and 7·7, logging occurred farther away from the stream network. Observations were also made for watershed 7·3 that collected the runoff from watersheds 7·2 and 7·5, and watershed 7·6, the uproad portion of watershed 7·7. The control watershed 0·2 was contiguous to the impacted watersheds and remained undisturbed. Following clearcutting, changes in summer daily maximum and minimum stream temperatures remained within ± 1 °C while changes in diurnal variation did not decrease by more than 0·5 °C. Concentrations of NO₃^? greatly increased by up to 6000% and concentrations of K⁺ increased by up to 300% during the second summer after logging. Smaller increases were observed for Fe_total (up to 71%), specific conductance (up to 26%), and Mg²⁺ (up to 19%). Post‐logging pH decreased slightly by no more than 7% while PO₄^3? concentration remained relatively constant. Suspended sediment concentrations appeared to increase during post‐logging, but there was not enough pre‐logging data to statistically confirm this result. Logging of moderate intensity and respecting established BMPs may account for the limited changes of water quality parameters and the low exceedances of the criteria for the protection of aquatic life. The proximity of the cutover to the stream network and logging within the riparian zone did not appear to affect water quality. Copyright © 2008 John Wiley & Sons, Ltd.     

First‐year post‐fire erosion rates in Bitterroot National Forest,Montana

Accelerated runoff and erosion commonly occur following forest fires due to combustion of protective forest floor material, which results in bare soil being exposed to overland flow and raindrop impact, as well as water repellent soil conditions. After the 2000 Valley Complex Fires in the Bitterroot National Forest of west‐central Montana, four sets of six hillslope plots were established to measure first‐year post‐wildfire erosion rates on steep slopes (greater than 50%) that had burned with high severity. Silt fences were installed at the base of each plot to trap eroded sediment from a contributing area of 100 m². Rain gauges were installed to correlate rain event characteristics to the event sediment yield. After each sediment‐producing rain event, the collected sediment was removed from the silt fence and weighed on site, and a sub‐sample taken to determine dry weight, particle size distribution, organic matter content, and nutrient content of the eroded material. Rainfall intensity was the only significant factor in determining post‐fire erosion rates from individual storm events. Short duration, high intensity thunderstorms with a maximum 10‐min rainfall intensity of 75 mm h^?1 caused the highest erosion rates (greater than 20 t ha^?1). Long duration, low intensity rains produced little erosion (less than 0·01 t ha^?1). Total C and N in the collected sediment varied directly with the organic matter; because the collected sediment was mostly mineral soil, the C and N content was small. Minimal amounts of Mg, Ca, and K were detected in the eroded sediments. The mean annual erosion rate predicted by Disturbed WEPP (Water Erosion Prediction Project) was 15% less than the mean annual erosion rate measured, which is within the accuracy range of the model. Published in 2007 by John Wiley & Sons, Ltd.     

Ages of sediment-hosted Himalayan Pb–Zn–Cu–Ag polymetallic deposits in the Lanping basin,China: Re–Os geochronology of molybdenite and Sm–Nd dating of calcite

The Lanping basin is a significant Pb–Zn–Cu–Ag mineralization belt of the Sanjiang Tethyan metallogenic province in China. Over 100 thrust-controlled, sediment-hosted, Himalayan base metal deposits have been discovered in this basin, including the largest sandstone-hosted Pb–Zn deposit in the world (Jinding), and several Cu ± Ag ± Co deposits (Baiyangping, Baiyangchang and Jinman). These deposits, with total reserves of over 16.0 Mt Pb + Zn, 0.6 Mt Cu, and 7000 t Ag, are mainly hosted in Meso-Cenozoic mottled clastic rocks, and strictly controlled by two Cenozoic thrust systems developed in the western and eastern segments of the Lanping basin.To define the metallogenic history of the study area, we dated nine calcite samples associated with copper sulfides from the Jinman Cu deposit by the Sm–Nd method and five molybdenite samples from the Liancheng Cu–Mo deposit by the Re–Os method. The calcite Sm–Nd age for the Jinman deposit (58 ± 5 Ma) and the molybdenite Re–Os age for the Liancheng deposit (48 ± 2 Ma), together with previously published chronological data, demonstrate (1) the Cu–Ag mineralization in the western Lanping basin mainly occurred in three episodes (i.e., ∼56–54, 51–48, and 31–29 Ma), corresponding to the main- and late-collisional stages of the Indo–Asian orogeny; and (2) the Pb–Zn–Ag (±Cu) mineralization in the eastern Lanping basin lacked precise and direct dating, however, the apatite fission track ages of several representative deposits (21 ± 4 Ma to 32 ± 5 Ma) may offer some constraints on the mineralization age.     

论四川盆地丘陵区防护林体系的建设

四川盆地丘陵区,人多地少,资源贫乏,经济不发达,生态环境质量低劣,因而建设具有生态效益、经济效益和社会效益的防护林体系很有必要。建设本区防护林体系的原则应是:共生,布局与结构合理,土地资源充分利用和总体最优。经采取切实有效的措施后,最终建成一个良性农田生态防护林网络体系,以协调当地人口、资源、经济和环境之间的关系,并使其日臻完善。     

Application of an improved semi-Lagrangian procedure to fully-nonlinear simulation of sloshing in non-wall-sided tanks

The semi-Lagrangian procedure is widely used for updating the fully-nonlinear free surface in the time domain. However, this procedure is only available to cases when the body surface is vertical near the waterline. Present study introduces an improved semi-Lagrangian procedure which removes this ‘vertical-wall’ limitation. Coupling with the boundary element method, the improved semi-Lagrangian procedure is applied to the simulation of fully-nonlinear sloshing waves in non-wall-sided tanks. From the result comparison with the open source CFD software OpenFOAM, it is confirmed that this numerical scheme could guarantee a sufficient accuracy. Further series studies on 2D and 3D fully-nonlinear sloshing waves in wedged tanks are performed. Featured phenomena are observed which are distinct from those in wall-sided tanks.     

Diagenetic evolution of the upper Cretaceous limestone and sandstone exhumed reservoirs in the western Basque–Cantabrian Basin,North Spain

The Basque–Cantabrian Basin (NE Spain) has been considered one of the most interesting areas for hydrocarbon exploration in the Iberian Peninsula since the 60th to 70th of last century. This basin is characterized by the presence of numerous outcrops of tar sands closely associated with fractures and Triassic diapirs. The aims of this work is to establish the diagenetic evolution of the Upper Cretaceous reservoir rocks with special emphasis in the emplacement of oil and their impact on reservoir quality. The studied rocks are constituted of carbonates and sandstones that contain massive quantities of bitumen filling vugs and fractures.Petrographic results indicate that the carbonate rocks from Maestu outcrops are bioclastic grainstones and wackestones, whereas the tar sandstones from Atauri and Loza outcrops are dominated by quartzarenites and subordinated subarkoses. The paragenetic sequence of the main diagenetic phases and processes include, pyrite, bladed and drusy calcite cement, calcite overgrowths, silicification of bioclasts and microcrystalline rhombic dolomite cement, and first stage of oil emplacement, blocky calcite cement, coarse crystalline calcite cement, calcitized dolomite, calcite veins, saddle dolomite and stylolites filled by the second phase of oil entrance. Together with the above mentioned diagenetic alterations, the arenites are affected by early kaolinitization of feldspars and the scarce formation of clay rim and epimatrix of illite. All sandstones and dolomitized carbonate rocks show high intercrystalline and intergranular porosity which is full by biodegraded hydrocarbons (solid bitumen). The biodegradation affects alkanes, isoprenoids and partially hopanes and steranes saturated hydrocarbons. Aromatics hydrocarbons, like naphthalenes, phenanthrenes, dibenzothiophenes and triaromatics are also affected by biodegradation. Results indicate that the first HC emplacement corresponds to early stage of calcite and dolomite cementation, and the second and more important emplacement is related to fracturation processes resulting in the formation of excellent reservoirs.     

Innovation for sustainable energy from a pro-poor perspective

The development and transfer of clean energy technologies to achieve universal energy access is challenging due to the inherent complexities of the energy sector, and the energy governance and financial systems in developing economies. Innovation is an essential part of successfully addressing these difficulties. Duplicating the energy infrastructure models of developed countries will not be sufficient to meet the needs of poor consumers. To the extent that innovation can accelerate energy access, it is important to understand the specific types of innovations that are necessary and how they might be facilitated. The general features of existing international clean energy innovation systems, which are predominantly driven by the markets and emissions reduction mechanisms of developed and rapidly growing emerging economies, are reviewed and the alignment of these systems to the innovation processes required to extend energy access globally is evaluated. Drawing on the innovation policy literature, the attributes of effective international and domestic energy innovation systems that are pro-poor and the associated policy approaches are identified.     

Scientists’ framing of the ocean science–policy interface

Scientists’ ideas, beliefs, and discourses form the frames that shape their choices about which research to pursue, their approaches to collaboration and communicating results, and how they evaluate research outputs and outcomes. To achieve ocean sustainability, there are increasing calls for new levels of engagement and collaboration between scientists and policy-makers; scientists’ willingness to engage depends on their current and evolving frames. Here, I present results about how scientists involved in diverse fields of ocean research perceived their role as scientists working at or near the ocean science–policy interface and how this related to their perceptions regarding ocean research priorities. The survey of 2187 physical, ecological and social scientists from 94 countries showed that scientists held different perspectives about their appropriate level of engagement at the ocean science–policy interface and the relative primacy of science versus politics in formulating ocean policy. Six clusters of scientists varied in their frames; three clusters accounted for 94% of the sample. Of 67 research questions identified from 22 research prioritization and horizon scanning exercises, the top eight were shared among all three clusters, showing consistency in research priorities across scientists with different framings of their role at the science–policy interface. Five focused on the mechanisms and effects of global change on oceans, two focused on data collection and management for long-term ocean monitoring, and one focused on the links between biodiversity and ecological function at different scales. The results from this survey demonstrated that scientists’ framings of the role of ocean science at the science–policy interface can be quantified in surveys, that framing varies among scientists, and that research priorities vary according to the framings.     

基于随机森林的中小跨径公路梁桥双柱墩地震易损性模型

为准确建立线路中小跨径梁桥桥墩的地震易损性模型,采用统计工具得到某山区高速公路桥梁双柱墩的结构、几何和材料特性的概率分布,由拉丁超立方体抽样生成桥墩属性数据集,建立了参数化的有限元模型.通过Pushover分析和基于非弹性需求谱的能力谱方法获取双柱墩的地震需求和抗震性能数据点,提出由随机森林(RF)模型建立桥墩地震易损...