Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Cross-formational hydrocarbon fluid flows in the Tertiary deltaic system of the Beaufort–Mackenzie Basin

Molecular and isotopic compositions of crude oils in the Beaufort–Mackenzie Basin confirm three genetic end-member oil groups and suggest extensive cross-formational hydrocarbon fluid flows in the Tertiary deltaic system. Inter- and intra-fractional variations in the geochemistry of the Tertiary-reservoired oils indicate that the oil source/maturity signatures were substantially masked by biomarkers that were picked up along migration pathways. Thus, many of the previously recognized “immature non-marine oils” are in fact thermally mature, probably derived from unpenetrated deeper marine source rocks. Although the effective source rock volumes have not been evaluated and their exact stratigraphic levels remain unknown, the relative timing of oil generation versus trap formation, rather than poor source quality, may be the cause of under-filled traps in the offshore area.     

Up-temperature flow of surface-derived fluids in the mid-crust: the role of pre-orogenic burial of hydrated fault rocks

The Walter‐Outalpa shear zone in the southern Curnamona Province of NE South Australia is an example of a shear zone that has undergone intensely focused fluid flow and alteration at mid‐crustal depths. Results from this study have demonstrated that the intense deformation and ductile shear zone reactivation, at amphibolite facies conditions of 534 ± 20 °C and 500 ± 82 MPa, that overprint the Proterozoic Willyama Supergroup occurred during the Delamerian Orogeny (c. 500 Ma) (EPMA monazite ages of 501 ± 16 and 491 ± 19 Ma). This is in contrast to the general belief that the majority of basement deformation and alteration in the southern Curnamona Province occurred during the waning stages of the Olarian Orogeny (c. 1610–1580 Ma). These shear zones contain hydrous mineral assemblages that cut wall rocks that have experienced amphibolite facies metamorphism during the Olarian Orogeny. The shear zone rock volumes have much lower δ¹⁸O values (as low as 1‰) than their unsheared counterparts (7–9‰), and calculated fluid δ¹⁸O values (5–8‰) consistent with a surface‐derived fluid source. Hydrous minerals show a decrease in δD_(H2O) from ?14 to ?22‰, for minerals outside the shear zones, to ?28 to ?40‰, for minerals within the shear zones consistent with a contribution from a meteoric source. It is unclear how near‐surface fluids initially under hydrostatic pressure penetrate into the middle crust where fluid pressures approach lithostatic, and where fluid flow is expected to be dominantly upward because of pressure gradients. We propose a mechanism whereby faulting during basin formation associated with the Adelaidean Rift Complex (c. 700 Ma) created broad hydrous zones containing mineral assemblages in equilibrium with surface waters. These panels of fault rock were subsequently buried to depths where the onset of metamorphism begins to dehydrate the fault rock volumes evolving a low δ¹⁸O fluid that is channelled through shear zones related to Delamerian Orogenic activity.     

Reply to comment by Y. Park and J.-H. Ree on 'Chemical remagnetization of the Upper Carboniferous-Lower Triassic Pyeongan Supergroup in the Jeongseon area, Korea: fluid migration through the Ogcheon Fold Belt'

In their comment, Park & Ree have raised several points against the interpretation by Park et al. , and argued that the remagnetization in the Jeongseon area was caused by the thermal effects of a Late Cretaceous pluton and/or associated short-range hydrothermal fluids, rather than by long-range fluids advocated by us.
We disagree with most points raised by Park & Ree and we make a case that these are invalid because of what we believe is incorrect geologic evidence. Hence, our model—that the fluids causing the chemical remagnetization might migrate through the fault system within the Ogcheon Fold Belt—is the most plausible scenario. We recognize that our model needs to be tested in a future study and we welcome new interpretations for or against our model based on reliable geologic or geophysical data.     

下庄铀矿田337矿床成矿流体稀土元素示踪

337铀矿床位于下庄矿田东缘,区内发育近EW向、NNE向构造裂隙群及NW向辉绿岩和正长岩脉体,发育以碱性为主的多种围岩蚀变。区内矿床主要赋矿围岩的稀土元素特征属壳源型。矿石内金属矿物以沥青铀矿为主,矿石的LREE/HREE比值为3.25,Sm/Nd比值平均为0.307,Ce/Yb比值为7.127,这些数据都显示出成矿流体具有较深来源。矿石较围岩亏损稀土元素尤其是轻稀土元素,稀土元素分布模式平缓,与幔源辉绿岩特别是与正长岩的稀土元素分布模式相近,负铕异常比围岩更为强烈,反映成矿流体的来源具有幔源性。结合区域地质特征,可以认为337矿床成矿流体来源具有幔源性质。     

鄂尔多斯古生界流体包裹体特征及其与油气演化关系

对鄂尔多斯盆地奥陶系碳酸盐岩、石炭-二叠系石英砂岩成岩作用研究的基础上,分别对上述岩石流体包裹体作了初步研究。奥陶系碳酸盐岩包裹体均一温度具有三个区段 :6 0～ 10 0℃,10 0～ 16 0℃,16 0～ 2 2 0℃;石炭-二叠系石英砂岩包裹体均一温度三个区段为 90～ 110℃,12 0～ 14 0℃,16 0～ 2 2 0℃。并利用包裹体测温资料结合已有的镜质体反射率、磷灰石裂变径迹等研究成果,对流体包裹体在鄂尔多斯盆地油气田形成、演化中应用作了初步探讨。     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。     

华北克拉通北部内、外缘中生代流体成矿作用研究--以大井、蔡家营典型矿床为例

华北克拉通北部内、外缘中生代形成的有色金属矿种繁多 ,以外缘富 Sn、内缘富 Mo,Cu、Pb、 Zn遍布内、外缘为主要特色。通过内、外缘典型矿床的研究和综合对比 ,认为外缘的富 Sn是与富 Sn的基底有关 ,内缘的富 Mo是与结晶基底地层和岩浆热液关系密切。而内、外缘 Cu、 Pb、 Zn的成矿与中生代构造转折 ,造成大规模陆相火山活动和成矿流体的卸载密切相关     

川滇密西西比河谷型铅锌矿床成矿流体来源研究:流体Na-Cl-Br体系的证据

应用流体包裹体滤液分析方法，测定了川滇7个MVT铅锌矿床成矿流体的Na,Cl,Br含量，结果表明成矿流体的x(Na/Br)和x(Cl/Br)的平均值分别为185和73，并与高度蒸发浓缩的残留海水的x(Na/Br)和x(Cl/Br)相近。成矿流体的Na,Cl含量呈正相关，在lgNa-lgCl图解中呈线性分布。根据这些事实以及矿床地质特征，认为原始成矿卤水起源于蒸发浓缩的残留海水，原始含矿卤水与富含有机质的大气降水混合导致矿质沉淀而成矿。