The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.     

软基上高速铁路路桥过渡段的技术措施研究

通过对高速铁路路基与桥梁过渡段动力特性分析，指出结构物沉降差是导致轨面不平顺的主要因素。分析了沉降差产生的原因，提出了软基上路桥过渡段的结构设计方案，并对其施工方法及质量检测标准进行了探索。     

Reconstruction of the diagenesis of the fluvial-lacustrine- deltaic sandstones and its influence on the reservoir quality evolution-- Evidence from Jurassic and Triassic sandstones, Yanchang Oil Field, Ordos Basin

The reservoir quality of Jurassic and Triassic fluvial and lacustrine-deltaic sandstones of the Yanchang Oil Field in the Ordos Basin is strongly influenced by the burial history and facies-related diagenetic events. The fluvial sandstones have a higher average porosity (14.8%) and a higher permeability (12.7×10?3 ?m2) than those of the deltaic sandstones (9.8% and 5.8 ×10?3 ?m2, respectively). The burial compaction, which resulted in 15% and 20% porosity loss for Jurassic and Triassic sandstones, respectively, is the main factor causing the loss of porosity both for the Jurassic and Triassic sandstones. Among the cements, carbonate is the main one that reduced the reservoir quality of the sandstones. The organic acidic fluid derived from organic matter in the source rocks, the inorganic fluid from rock-water reaction during the late diagenesis, and meteoric waters during the epidiagenesis resulted in the formation of dissolution porosity, which is the main reason for the enhancement of reservoir-quality.     

Human Modification of the Geomorphically Unstable Salt River in Metropolitan Phoenix

In‐stream gravel mining, massive bridge piers, and channelization have all contributed to the geomorphic instability of the Lower Salt River channel in Arizona. Dam closure, changing dam operating rules, and the frequent modification of the channel bed have decreased our ability to predict the Salt River hydrology. Engineering practice has adapted to this situation and to a public that is increasingly intolerant of service disruptions by constructing larger bridges and extending levees. Building these larger structures may be counterproductive; future construction should not constrict the channel and should re‐establish a braided river to decrease the energy available to the system.     

浅论新疆海相火山热水沉积矿床的分带及其找矿意义

新疆海相火山热水沉积矿床，一般在时间上没有明显的集中生长期。空间上依附于活动大陆边缘火山岛弧带，它在区域上和矿床本身具有矿种转化、类型转换、配套与分带特征。以块状氧化物、块状碳酸盐和块状硫化物转换序次来研究该类矿床。利用铁木尔特铅锌矿上部铅锌下部铜金，预须开普台铁矿上铁下铜；莫托沙拉铁锰矿上锰下铁中间铅锌重晶石等矿种转化规律和由块状氧化物和块状碳酸盐向块状硫化物成生过渡特点，预测诸如蒙库铁矿、赤龙峰火山盆地中铁矿和喀喇昆仑山各铁矿床(点)外围与深部转换、发展成为铜金矿的成矿前景。     

Seismic scattering at the top of the mantle Transition Zone

We document strong seismic scattering from around the top of the mantle Transition Zone in all available high resolution explosion seismic profiles from Siberia and North America. This seismic reflectivity from around the 410 km discontinuity indicates the presence of pronounced heterogeneity in the depth interval between 320 and 450 km in the Earth’s mantle. We model the seismic observations by heterogeneity in the form of random seismic scatterers with typical scale lengths of kilometre size (10-40 km by 2-10 km) in a 100-140 km thick depth interval. The observed heterogeneity may be explained by changes in the depths to the α-β-γ spinel transformations caused by an unexpectedly high iron content at the top of the mantle Transition Zone. The phase transformation of pyroxenes into the garnet mineral majorite probably also contributes to the reflectivity, mainly below a depth of 400 km, whereas we find it unlikely that the presence of water or partial melt is the main cause of the observed strong seismic reflectivity. Subducted oceanic slabs that equilibrated at the top of the Transition Zone may also contribute to the observed reflectivity. If this is the main cause of the reflectivity, a substantial amount of young oceanic lithosphere has been subducted under Siberia and North America during their geologic evolution. Subducted slabs may have initiated metamorphic reactions in the original mantle rocks.     

Lithology and palynology of Neogene sediments on the narrow edge of the Kitakami Massif (basement rocks), northeast Japan: Significant change for depositional environments as a result of plate tectonics

Abstract A controversial stratigraphic section, the Taneichi Formation, is exposed along the Pacific Coast of northeastern Honshu, the main island of the Japanese Archipelago. Although most sediments of the formation have long been dated as late Cretaceous, the northern section of it has been assigned to (i) the Upper Cretaceous; (ii) the Paleogene; or (iii) the Neogene. In the present report, we present the data of palynological and sedimentological studies, showing that the northern section should be assigned to the Neogene. A more important point in the present study is that we invoke some basic principles of fluvial sedimentology to resolve this stratigraphic subject. The lignite layers full of Paleogene–Miocene dinoflagellate cysts and pollen assemblages drape over the boulder‐sized (>40 cm in diameter) clasts in the northern section. However, the layers totally consist of aggregates of small lignite chips, indicating that the lignites are allochthonous materials. The mega‐clasts with derived microfossils in the lignites are thought to have been deposited as Neogene fluvial (flood) sediments in the newly formed Japanese Archipelago. Prior to the Miocene, the northern Honshu was part of the Eurasian Plate, thus the boulder‐sized clasts cannot be envisaged as long river flood deposits along the continental Paleogene Pacific Coast. Instead, the mega‐clasts with the draping lignites were probably derived from nearby Miocene highlands in the newly born island arc.     

Sediment Phosphorus Chemistry and Microbial Biomass along a Lowland New Zealand Stream

An evaluation of the distribution of P concentrations in streamflow, P fractions andthe microbial biomass P pool was made of bed and bank sediments along a lowlandstream in New Zealand. Agricultural intensification increased downstream. However,most P fractions decreased downstream (total P decreased from c. 400 to 250 mg kg^-1) in bed sediments, while P in streamflow remained relatively constant (generally < 0.005 mg l^-1) and sediment microbial P increased from 2 to 8 mg kg^-1. An investigation of P release from dried and rewetted sediments showed that solution P (CaCl2-P) increased, on average > 300%, and proportional to the size of the microbial biomass P pool before drying, except in sediments with much organic carbon (OC). When supplied with a P source (1 mg l^-1) and then simultaneously with a C source (glucose, 100 mg l^-1), all sediment behaved similarly and biotic sorption accounted for, on average, 27 and 34% of the total sediment uptake, respectively (maximum of 58%). The quantity of P taken up was related to the initial size of the microbial biomass P pool, and the availability of P as influenced by organic P complexes and OC. The sediment microbial biomass represents a transient, but small store of P could be useful to indicate bioavailable P inputs.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.