地幔流体与成矿作用

地球内部流体的活动乃是形成各种矿床的必要条件，是导致矿物聚积和金属成矿作用的前提。随着地球科学的进展，作为地球内部流体的重要组成部分，地幔流体越来越多的重视。本文在解剖世界首例白云鄂博地幔流体交代稀土矿床的基础上，初步总结了地幔流体与成矿作用的基本问题。     

鄂北工区PDC钻头泥包特征分析及预防措施

针对鄂北工区钻井工作特点,结合中石化集团华北石油局三普钻井公司各井队近几年钻井生产情况,对PDC钻头在现场应用中普遍存在的泥包问题进行了分析,提出了一套可行的预防措施。     

大青山逆冲推覆构造形成演化过程的流体证据

大青山逆冲断层带内热液脉体十分发育,按其产状可划分为充填脉和边缘脉。根据形成时间主要划分为3期:早期石英脉、中期石英脉和晚期方解石脉。早期石英脉中流体包裹体类型较为复杂,见有气液两相、含CO2三相、纯CO2及少量单液相等4种类型原生包裹体,分析表明流体主要来源于地壳深部或上地幔。中期石英脉中主要发育气液两相包裹体和少量单液相包裹体,流体主要来源于大气降水,并且有少量岩浆热液混入。晚期方解石脉内仅含有气液两相包裹体及少量的单液相包体,流体主要来源于层间建造水。根据逆冲变形事件期次、时间,结合热液脉体形成深度数据,确定了大青山逆冲推覆体系变形演化历史:印支期逆冲推覆事件发生在地壳7～8 km深度,燕山中期逆冲推覆事件发生在3～6 km范围内,而燕山晚期逆冲推覆事件发生近地表2 km范围内。     

蒙古国满都拉探矿区地质特征及流体包裹体研究

满都拉探矿区位于蒙古国南戈壁省满都拉苏木。矿区地表中元古界白云岩中出露大面积含孔雀石、蓝铜矿和辉铜矿的硅化蚀变带,含铜矿物与石英脉在空间上紧密共生,石英中的流体包裹体可能保留了原生成矿流体特征。为确定其成矿地质体和成因类型,指导后续找矿工作,本文对硅化蚀变带中的石英进行了流体包裹体研究。根据石英中包裹体的产状可将包裹体分为早晚两个阶段,早阶段富含CO2(C型)和水溶液(W型)包裹体,偶见含子矿物(S型)包裹体,流体均一温度为195~384℃,盐度为2.77%~21.37%Na Cl.eqv,反映了原生成矿流体的特征。晚阶段仅出现水溶液(W型)包裹体,流体均一温度集中在95~213℃,盐度为1.27%~12.63%Na Cl.eqv。流体由早阶段的中高温、中盐度、富CO2流体向晚阶段低温、低盐度、贫CO2流体演化。据此推测成矿流体可能为岩浆流体,流体形成深度大约在5.7 km以上。     

钠土泥浆在构造破碎带型复杂地层钻进中的应用

应用钠土泥浆,解决了锡坑矿区复杂地层钻进中运用其它措施难以解决的塌、漏、掉等问题,保证了后续施工的钻孔质量,提高了钻进效率和经济效益。通过钠土泥浆与钙土泥浆及其它无固相冲洗液类比分析,得出了钠土泥浆在该矿区取得好成效的机理。针对赣南构造破碎带型复杂地层钻进中存在的问题,借鉴锡坑矿区的成功经验,提出应重视对钠土泥浆的研究和应用的建议。     

Fault-controlled dolomitization at Swan Hills Simonette oil field (Devonian), deep basin west-central Alberta, Canada

The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (T_h=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (T_peak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more ⁸⁷Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on ⁸⁷Sr/⁸⁶Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and ²⁰⁶Pb/²⁰⁴Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.     

Fluid-rock history of granulite facies humite-marbles from Ambasamudram, southern India.

An extensive humite‐bearing marble horizon within a supracrustal sequence at Ambasamudram, southern India, was studied using petrological and stable isotopic techniques to define its metamorphic history and fluid characteristics. At peak metamorphic temperatures of 775±73°C, based on calcite‐graphite carbon isotope thermometry, the mineral assemblages suggest layer‐by‐layer control of fluid compositions. Clinohumite + calcite‐bearing assemblages suggest X_CO2 < 0.4 (at 700°C and 5 kbar), calcite + forsterite + K‐feldspar‐bearing assemblages suggest X_CO2>0.9 (at 790°C); and local wollastonite + scapolite + grossular‐bearing zones formed at X_CO2 of c. 0.3. Retrograde reaction textures such as scapolite + quartz symplectites after feldspar and calcite and replacement of dolomite + diopside or tremolite+dolomite after calcite+forsterite or calcite+clinohumite are indicative of retrogression under high X_CO2 conditions. Calcite preserves late Proterozoic carbon and oxygen isotopic signatures and the marble lacks evidence for extensive retrograde fluid infiltration, while during prograde metamorphism the possible infiltration of aqueous fluids did not produce significant isotopic resetting. Isotopic zonation of calcite and graphite grains was likely produced by localized CO₂ fluid infiltration during retrogression. Contrary to the widespread occurrence of humite‐marbles related to retrograde aqueous fluid infiltration, the Ambasamudram humite‐marbles record a prograde‐to‐peak metamorphic humite formation and retrogression under conditions of low X_H2O.     

云南兰坪北部铜多金属矿化区成矿流体流动与矿化分带——流体包裹体和稳定同位素依据

滇西兰坪盆地北部发育了一类受逆冲推覆构造控制的浅成热液Cu—Ag—Pb-Zn矿化，形成了白秧坪、富隆厂、吴底厂、麻栗坪及金满、科登涧等大-中型矿床和矿点，并存在矿化分带。文章利用这些矿化脉体的流体包裹体和热液方解石的碳氧同位素组成资料，研究成矿流体与矿化分带的关系。结果表明，成矿流体主要属于NaCl-H2O成分体系，盐度ω(NaCleq)为2％～11％，形成温度为170～300℃，形成于1．8～3．8km深度内，这些相似性说明这类矿化的发生具有相似的流体性质和沉淀机制。热液方解石在δ^13C-δ^18O图解中呈近水平线展布的型式，指示流体源自地壳浅部的地下水系统，与海相灰岩等围岩作用形成了溶解碳以[HCO3^]-为主的成矿流体，流体与岩石的相互作用可能是成矿流体沉淀的主要机理。从西到东，流体包裹体的盐度-温度由高到低变化与矿化分带和逆冲推覆构造的根带→中带→锋带相配套，显示重力驱动流动可能是主要的流体流动机制。成矿流体在不同构造部位流动的通畅及流体．岩石系统的封闭-开放程度等流体流动性质与矿化发生的强度和规模有关，兰坪北部逆冲推覆构造中带的流体通畅地流动及沉淀时处于相对开放状态，有利于该区形成较大规模的浅成热液多金属矿化。     

安徽铜陵地区蚀变流体填图方法的探讨

蚀变流体填图是一项区域流体地质调查研究工作 ,也是一项具有战略意义的、综合性的基础地质研究工作。区域大面积的流体填图工作的理论依据、思路方法、填图要素、技术要求和规范等还没有一套成熟的方法体系。在实施中国地质调查局和国土资源部科学技术司的“铜陵地区蚀变流体填图”项目中 ,探讨了流体填图的理论依据、思路方法、研究内容和填图要素 ,对填图单位制定了 3级填图单元等级体制 ,即流体系统流体子系统流体单元。在铜陵地区划分出 4个流体系统 ,7个流体子系统和 18个流体单元。     

沉积盆地异常低压与低压油气藏成藏机理综述

地下异常低压主要有两种成因：抬升—剥蚀反弹和在介质孔隙度、渗透率非均质性条件下的区域地下水稳态流动，而化学渗透与流体“冷却”在低压形成中只起次要作用。根据圈闭类型、储盖组合及成藏过程，将低压油气藏分为三种类型：①常规地层型(除砂岩透镜体外)低压油气藏，低渗透岩石通常起遮挡作用，底水与边水不发育；②砂岩透镜体低压油气藏，通常分布于盆地中心的深部，具有不含水、充满油气的特点，油气的充注和水的排出与构造抬升之前压实作用、超压引起的水驱裂缝和毛细管力的作用有关，抬升—剥蚀引起的异常低压导致水由砂岩向页岩的流动有助于油气藏中水的排出；③深盆区低渗透储层低压气藏，通常分布在含水层的下倾方向(气水倒置)，异常低压是由于构造抬升致使超压向低压演化的结果。实例研究表明，构造抬升盆地中的低压系统是一个水动力相对封闭的体系，有利于油气的聚集与保存。