兰坪——思茅盆地石盐矿床盐矿物包裹体特征

石盐矿床在蒸发沉积过程中经受环境变化而被改造，兰坪－思茅盆地石盐矿床石盐矿物流体包裹体特征及测温数据证明，该区地壳在喜山期一直处于活动状态，在石盐的成矿、成矿期后都迭加了火山以及构造－热作用。     

临南地区石油运移方向与成藏期次研究

根据原油及油砂抽提物中含氮化合物分析、原油生物标志成熟度参数及储层流体包裹体烃类成分分析,研究了临南地区石油运移的方向、距离、成藏期次。结果表明临南油田仅有一期油气运聚成藏过程,属中新世末形成的成熟原油,4 甲基甾烷含量较高。曲堤油田存在两期油气运聚成藏过程,早期原油成熟度低,4 甲基甾烷含量低,运移距离较远,成藏后大部分散失 ;晚期充注的原油成熟度较高,4 甲基甾烷含量也较高,并保存至今。     

中国东部幔源气体同位素地球化学

中国东部地幔岩包体及其单矿物中发育有大量的流体包裹体，采用阶段加热真空热爆的 方法脱出幔源包裹体中的气体，测试了气体的碳、氧、氦、氮等同位素组成。ＣＯ２的σ１３℃普遍较低， 主峰值为（－１８～－２２）×１０－3 ，多数样品在高温下的 σ１３℃普遍小于低温下的对应值。氧同位素变 化也很大，从－３．４×１０－３至２５．５×１０－３（ＳＭＯＷ），并呈现多峰的特征。σ１８Ｏ与σ１Ｃ３具有很好的相 关性，可能受控于同种分馏机制。Ｃ、Ｏ同位素组成特征表明，中国东部大陆地幔具有很大的化学不 均一性，可能是由地幔碳的多样性、源区的不均一性或地幔交代作用所致。氧同位素的变化可能是 结晶作用、去气作用或地壳物质混染所至。４Ｈｅ含量变化范围为（０．２４～２５．００）×１０－８，３Ｈｅ／４Ｈｅ变 化范围为（０．４６～１２．８０）×１０－６，４０Ａｒ含量从０．９７×１０－６到３４．１８×１０－６，４０Ａｒ／３６Ａｒ变化范围为 ２５０．５８～１２０２。３Ｈｅ／４Ｈｅ的变化反映了亏损地幔和富集地幔的存在。不同地区４０Ａｒ／３６Ａｒ的巨大差 异显示了地幔脱气程度的不同，也说明在地幔演化中Ａｒ、Ｈｅ同位素地球化学行为的差异。     

基于有机包裹体研究追索海拉尔盆地煤成油

有机包裹体在油气成因，运移研究中具有重要的意义，本文通过对海拉尔盆地砂岩样品中的有机包裹体进行显微荧光观察，包裹体均一测温，并对包裹体成分进行轻烃气相色谱及碳同位素分析，索了研究区油气的成因性质及油气运移期次,结果表明，海拉尔地区存在煤成油，并有两期以上的油气运移。     

四川牦牛坪稀土矿床矿物流体包裹体研究

对矿物流体包裹体进行分析的结果表明，牦牛坪稀土矿床的矿物中存在4种类型包裹体：（1）液-所耵；（2）液-气-固相；（3）纯气相；（4）固相，矿物包裹体显微测温结果显示牦牛坪矿床成矿温度从423℃至122℃；成矿流体的盐度ω（NaCl)为11.46%-14.36%质量分数，包裹体的成分分析结果显示流体中富含CO2和其他挥发性组分，并富含大量的不同成分的矿物雏晶，根据矿床地质特征和矿物包裹体的研究结果，作者认为本矿床的成矿作用是由碳酸岩岩浆气液流体的沸腾、充填和交代过程而实现的。     

Fault-controlled dolomitization at Swan Hills Simonette oil field (Devonian), deep basin west-central Alberta, Canada

The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (T_h=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (T_peak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more ⁸⁷Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on ⁸⁷Sr/⁸⁶Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and ²⁰⁶Pb/²⁰⁴Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.     

Petrogenetic and Metallogenetic Background of the Dajing Cu–Sn–Ag–Pb–Zn Ore Deposit, Inner Mongolia, and Characteristics of the Mineralizing Fluid

Abstract: The Dajing Cu–Sn–Ag–Pb–Zn ore deposit, Inner Mongolia of China, is a fissure‐filling hydrothermal ore deposit that occurs within the Upper Permian Linxi group. No magmatic pluton and volcanic rocks outcrop on the surface of the deposit. Most of ore veins show clear‐cut boundary with country rocks. Wallrock alterations that include silicification, carbonation, chlori–tization, and sericitization are generally weak and occur in the close vicinity of ore veins. Mineralization is divided into three stages: (1) cassiterite–arsenopyrite–quartz stage, (2) sulfide stage, and (3) Pb–Zn–Ag–carbonate stage. These mineralization stages have distinct ranges of homogenization temperatures, 290–350C for Stage 1, 260–320C for Stage 2, and 150–250C for Stage 3. However, salinities for Stages 1, 2, and 3 overlap and range between 2.2 and 10.4 wt % NaCl equivalent. The dD values relative to V‐SMOW of inclusion water from quartz are lower than –88% and centered at –100 to –130%. The δ³⁴S values relative to CDT of sulfide ore minerals and δ¹³C values relative to PDB of carbonate gangue minerals, vary from –0.3 to +2.6%, and from –7.0 to –2.9%, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric‐derived water and the other from hypogene magma for sulfur and carbon species. Analyses of inclusion gas and liquid compositions are performed. The H₂O and CO₂ are the two most abundant gaseous components, whereas SO₄^2‐ and Cl^‐, and Na⁺, Ca²⁺, and K⁺ are the major anions and cations, respectively. A linear trend is shown on the gaseous H₂O versus CO₂ plot. Phase separation is excluded as cause for the trend on the basis of isotope data and fluid inclusion microthermometry. In addition, a weak wallrock alteration does not support fluid‐rock interaction as an efficient mechanism. Hence, the linear H₂O–CO₂ trend is interpreted in terms of absorption or dilution of CO₂–dominant magmatic vapor by meteoric‐derived water. Cooling effects resulting from dilution may have caused precipitation of ore minerals. Major and trace element compositions of regional granites show a high‐K calc–alkaline characteristics and an arc–affinity. Lead isotopic compositions of galena samples from the Dajing deposit exhibit elevated U/Pb and Th/Pb ratios. These characteristics indicate a common source of supra subduction zone mantle wedge for regional granites and metals from the Dajing deposit.     

Preliminary Study on the Chemical Mapping of Individual Fluid Inclusion by Synchrotron X-ray Fluorescence Microprobe

Abstract: Synchrotron X-ray fluorescence analyses on individual hypersaline fluid inclusions were tested to using synchrotron source at Tsukuba (KEK), Japan. The XRF instrumentation at KEK meets the purpose of fluid inclusion analysis, nondestructive, multi–element, ppm detection limits, with micro spatial resolution. In practice, however, the quantitative chemical analysis of fluid inclusion requires further considerable data accumulation. Semi-quantitative distribution of elements (mass number > 25) in single fluid inclusion was obtained.     

Oxygen and Carbon Isotope Study of Calcite and Dolomite in the Disseminated Au-Ag Telluride Bulawan Deposit, Negros Island, Philippines

Abstract: The disseminated Au‐Ag telluride Bulawan deposit, Negros island, Philippines, is hosted by dacite porphyry breccia pipes which formed in a Middle Miocene dacite porphyry stock. Electrum and Au‐Ag tellurides occur mostly as grains intergrown with or filling voids between sphalerite, pyrite, chalcopyrite, galena and tennantite. Calcite, quartz and rare dolomite are the principal gangue minerals. Four types of alteration were recognized in the deposit, namely; propylitic, K‐feldspar‐sericitic, sericitic and carbonate alteration. Carbonate alteration is correlatable to the gold deposition stage and occurs mostly along fault zones. The δ¹⁸O and δ¹³C compositions of calcite and dolomite in propylite zone and ore‐stage dacite porphyry breccia were determined. The δ¹⁸O values of calcite in propylitized andesite range from +12.2 to +14.7%, and their δ¹³C values range from ‐6.1 to ‐1.0%. The δ¹⁸O values of calcite and dolomite in sericite‐ and carbonate‐altered, mineralized dacite porphyry breccia and dacite porphyry rocks range from +15.1 to +23.1%, and the δ¹³C values of calcite and dolomite range from ‐3.9 to +0.9%. The δ¹⁸O and δ¹³C values of the hydrothermal fluids were estimated from inferred temperatures of formation on the basis of fluid inclusion microthermometry. The δ¹⁸O values of hydrothermal fluid for the propylitic alteration were calculated to be +8.5 ‐ +9.5%, assuming 375°C. On the other hand, the δ¹⁸O values of ore solutions for base metal and Au mineralization were computed to be +13.6 ‐ +14.6%, assuming 270°C. The hydrothermal fluids that formed the Bulawan deposit are dilute and ¹⁸O‐enriched fluids which reacted with ¹⁸O‐ and ¹³C‐rich wallrocks such as limestone.     

北京大庄科花岗质杂岩体中包体定位的动力学机理之探讨

北京大庄科花岗杂岩普遍含有微粒—细粒暗色包体,其中石英闪长岩和石英二长岩含包体较多,二长花岗岩含少量包体,淡色花岗岩和闪长岩含包体甚少。在含包体较多的岩体内,包体在岩体中部的分布量较多。计算结果表明,包体越小沉浮半径愈大、参数F值愈小的岩体,含包体愈多;岩体内岩浆上升速度大、包体下沉速度小以及F值小的部位,包体滞留量大。各岩体包体分布的多少,是由包体在寄主岩浆内的扩散系数、混合程度、岩浆携带力和基性岩浆混入量等因素综合决定的。