Petrogenetic and Metallogenetic Background of the Dajing Cu–Sn–Ag–Pb–Zn Ore Deposit, Inner Mongolia, and Characteristics of the Mineralizing Fluid

Abstract: The Dajing Cu–Sn–Ag–Pb–Zn ore deposit, Inner Mongolia of China, is a fissure‐filling hydrothermal ore deposit that occurs within the Upper Permian Linxi group. No magmatic pluton and volcanic rocks outcrop on the surface of the deposit. Most of ore veins show clear‐cut boundary with country rocks. Wallrock alterations that include silicification, carbonation, chlori–tization, and sericitization are generally weak and occur in the close vicinity of ore veins. Mineralization is divided into three stages: (1) cassiterite–arsenopyrite–quartz stage, (2) sulfide stage, and (3) Pb–Zn–Ag–carbonate stage. These mineralization stages have distinct ranges of homogenization temperatures, 290–350C for Stage 1, 260–320C for Stage 2, and 150–250C for Stage 3. However, salinities for Stages 1, 2, and 3 overlap and range between 2.2 and 10.4 wt % NaCl equivalent. The dD values relative to V‐SMOW of inclusion water from quartz are lower than –88% and centered at –100 to –130%. The δ³⁴S values relative to CDT of sulfide ore minerals and δ¹³C values relative to PDB of carbonate gangue minerals, vary from –0.3 to +2.6%, and from –7.0 to –2.9%, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric‐derived water and the other from hypogene magma for sulfur and carbon species. Analyses of inclusion gas and liquid compositions are performed. The H₂O and CO₂ are the two most abundant gaseous components, whereas SO₄^2‐ and Cl^‐, and Na⁺, Ca²⁺, and K⁺ are the major anions and cations, respectively. A linear trend is shown on the gaseous H₂O versus CO₂ plot. Phase separation is excluded as cause for the trend on the basis of isotope data and fluid inclusion microthermometry. In addition, a weak wallrock alteration does not support fluid‐rock interaction as an efficient mechanism. Hence, the linear H₂O–CO₂ trend is interpreted in terms of absorption or dilution of CO₂–dominant magmatic vapor by meteoric‐derived water. Cooling effects resulting from dilution may have caused precipitation of ore minerals. Major and trace element compositions of regional granites show a high‐K calc–alkaline characteristics and an arc–affinity. Lead isotopic compositions of galena samples from the Dajing deposit exhibit elevated U/Pb and Th/Pb ratios. These characteristics indicate a common source of supra subduction zone mantle wedge for regional granites and metals from the Dajing deposit.     

Preliminary Study on the Chemical Mapping of Individual Fluid Inclusion by Synchrotron X-ray Fluorescence Microprobe

Abstract: Synchrotron X-ray fluorescence analyses on individual hypersaline fluid inclusions were tested to using synchrotron source at Tsukuba (KEK), Japan. The XRF instrumentation at KEK meets the purpose of fluid inclusion analysis, nondestructive, multi–element, ppm detection limits, with micro spatial resolution. In practice, however, the quantitative chemical analysis of fluid inclusion requires further considerable data accumulation. Semi-quantitative distribution of elements (mass number > 25) in single fluid inclusion was obtained.     

Oxygen and Carbon Isotope Study of Calcite and Dolomite in the Disseminated Au-Ag Telluride Bulawan Deposit, Negros Island, Philippines

Abstract: The disseminated Au‐Ag telluride Bulawan deposit, Negros island, Philippines, is hosted by dacite porphyry breccia pipes which formed in a Middle Miocene dacite porphyry stock. Electrum and Au‐Ag tellurides occur mostly as grains intergrown with or filling voids between sphalerite, pyrite, chalcopyrite, galena and tennantite. Calcite, quartz and rare dolomite are the principal gangue minerals. Four types of alteration were recognized in the deposit, namely; propylitic, K‐feldspar‐sericitic, sericitic and carbonate alteration. Carbonate alteration is correlatable to the gold deposition stage and occurs mostly along fault zones. The δ¹⁸O and δ¹³C compositions of calcite and dolomite in propylite zone and ore‐stage dacite porphyry breccia were determined. The δ¹⁸O values of calcite in propylitized andesite range from +12.2 to +14.7%, and their δ¹³C values range from ‐6.1 to ‐1.0%. The δ¹⁸O values of calcite and dolomite in sericite‐ and carbonate‐altered, mineralized dacite porphyry breccia and dacite porphyry rocks range from +15.1 to +23.1%, and the δ¹³C values of calcite and dolomite range from ‐3.9 to +0.9%. The δ¹⁸O and δ¹³C values of the hydrothermal fluids were estimated from inferred temperatures of formation on the basis of fluid inclusion microthermometry. The δ¹⁸O values of hydrothermal fluid for the propylitic alteration were calculated to be +8.5 ‐ +9.5%, assuming 375°C. On the other hand, the δ¹⁸O values of ore solutions for base metal and Au mineralization were computed to be +13.6 ‐ +14.6%, assuming 270°C. The hydrothermal fluids that formed the Bulawan deposit are dilute and ¹⁸O‐enriched fluids which reacted with ¹⁸O‐ and ¹³C‐rich wallrocks such as limestone.     

EXPERIMENTAL GEOCHEMISTRY STUDY ON GOLD IN WATER-ROCK REACTION UNDER THERMAL FLUID SYSTEM AT MESO-LOW TEMPERATURE

Based on the knowing geochemical characteristics of wall rock in the Mobin gold deposit and composition of fluid inclusion in ore,water-rock experiments were carried out,important achievements are acquired as following: Gold is mainly derived from the ore-bearing wall rock,i,e.,a series of epimetamorphic clastic gritstone,sandy slate,and tuffaceous slate in the Wuqiang Banxi Formation,Wuqiangxi Group.In thermal system with middle-low temperature chlorine gold may be derived form stable complex ions,so it is quite important in gold metallogenic process.Sulphur and chlorine perform as the major negative ions throughout the gold activation and migration movement.The concentration of sulphur and chlorine ions,pH value and temperature are of deciding significance for gold activation,migration and precipitation.     

The effects of surface area, grain size and mineralogy on organic matter sedimentation and preservation across the modern Squamish Delta, British Columbia: the potential role of sediment surface area in the formation of petroleum source rocks

Surface sediment samples were collected from the Squamish River Delta, British Columbia, in order to determine the role of sediment surface area in the preservation of organic matter (OM) in a paralic sedimentary environment. The Squamish Delta is an actively prograding delta, located at the head of Howe Sound.Bulk total organic carbon (TOC) values across the Squamish Delta are low, ranging from 0.1 to 1.0 wt.%. The carbon/total nitrogen ratio (C_org/N) ranges from 6 to 17, which is attributed to changes in OM type and facies variations. The <25-μm fraction has TOC concentrations up to 2.0 wt.%, and a C_org/N ratio that ranges from 14 to 16. The 53–106-μm fraction has higher TOC concentrations and C_org/N ratios relative to the 25–53-μm fraction. The C_org/N ratio ranges from 9 to 18 in the 53–106-μm fraction and 5.5–10.5 in the 25–53-μm fraction. Surface area values for bulk sediments are low (0.5–3.0 m²/g) due to the large proportion of silt size material. Good correlation between surface area and TOC in bulk samples suggests that OM is adsorbed to mineral surfaces. Similar relationships between surface area and TOC were observed in size-fractionated samples. Mineralogy and elemental composition did not correlate with TOC concentration.The relationships between surface area, TOC and total nitrogen (TN) can be linked to the hydrodynamic and sedimentological conditions of the Squamish Delta. As a result, the Squamish Delta is a useful modern analogue for the formation of petroleum source rocks in ancient deltaic environments, where TOC concentrations are often significantly lower than those in source rocks formed in other geological settings.     

Trace Elements Analysis of Geological Samples by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

ＩＮＴＲＯＤＵＣＴＩＯＮＬａｓｅｒａｂｌａｔｉｏｎｉｎｄｕｃｔｉｖｅｌｙｃｏｕｐｌｅｄｐｌａｓｍａｍａｓｓｓｐｅｃｔｒｏｍｅ ｔｒｙｉｓａｎｉｎｃｒｅａｓｉｎｇｌｙｄｅｖｅｌｏｐｅｄａｎａｌｙｔｉｃａｌｔｅｃｈｎｉｑｕｅｆｏｒｓｏｌｉｄｓａｍｐｌｅａｎａｌｙｓｉｓ.ＬＡ ＩＣＰ ＭＳｏｆｆｅｒｓａｔｔｒａｃｔｉｖｅｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｈｉｇｈｓｅｎｓｉｔｉｖｉｔｙ ,ｌｏｗｄｅｔｅｃｔｉｏｎｌｉｍｉｔｓ,ｍｉｎｉｍａｌｓａｍｐｌｅｐｒｅｐａｒａ ｔｉｏｎ ,ｌｅｓｓｏｘｉｄｅｓｉｎｔｅｒｆｅ…     

从岩相古地理论塔里木盆地西南地区石炭系油气潜景

石岩系是塔里木盆地西南地区重要的海相烃源岩和储集岩地层，油气潜力很大，但目前仅发现了1个气田、1个油田和2个油藏，勘探程度很低。本文在岩相古地理和地震地层学岩性岩相研究的基础上，对本区石炭系的烃源岩和储集岩的类型、分布及其与沉积环境的关系进行了研究，对盖层性质和分布，尤其对石炭系经过多次大的构造变动后所形成的油气潜景区进行了较深入的探讨，并指出4个有利的油气勘探地区，即巴楚隆起西端、玛扎塔克断裂带-海米-罗斯断裂带、麦盖提斜坡的北缘、南缘推覆体上盘。同时指出了各有利地区的勘探对策。     

Special Issue Devoted to Petroleum Geology in Marginal Sea Deepwater Settings—Take the South China Sea as an Example Preface

High‐resolution tomographic images of the belt crossing the Japan Trench‐Changbai Mountains‐Dong Ujimqin Qi are represented in this paper, revealing the shape of a subducted slab in the western Pacific region and characteristics of the lithospheric structures under the Changbai Mountains and the Da Hinggan Mountains. Studies of the spatial distribution, subduction time and the time‐lag between the subduction and magmatism, combined with petrology and isotope geochemistry of the Late Mesozoic volcano‐plutonic rocks from the Da Hinggan Mountains‐Yanshan Mountains have further proved the independence of magmatic activities from the subduction of the Pacific plate. The Mesozoic tectono‐thermal evolutionary history and structural characteristics of the lithosphere in the Da Hinggan Mountains and North China suggest that the formation and evolution of magma have probably a close relationship with the delamination and thinning of the continental lithosphere and the underplating resulting from the consequent upwelling of the asthenosphere. On the other hand, the large‐scale strike‐slip fault system, resulting from sinistral shearing of the Pacific plate relative to the Asian continent in the Mesozoic, is responsible for the formation and emplacement of magma on the continental margin. It was the intense crust‐mantle interaction, together with structural deformation at the shallower levels that led to the large tectono‐magmatic belt in the East Asian continental margin.     

Rocking response of flexible circular foundations on layered media

The analysis of the response of a flexible circular foundation on layered media due to an arbitrarily distributed vertical loading is presented. The analysis is based on the ‘ring method’ approach, i.e. discretization of the foundation in a set of concentric rings. The arbitrarily distributed loading is expanded in the circumferential direction in a Fourier series. The influence coefficient matrix of soil for each element of the series is evaluated utilizing the stiffness matrix approach. The stiffness matrix of the foundation is obtained from the finite difference energy method approach. Numerical examples illustrate the influence of several soil-foundation parameters on the rocking response of a foundation. Results are presented in terms of displacement and soil reaction distributions and impedance functions point to significantly different responses of flexible and rigid foundations.     

Space-time interaction amongst clusters of mining induced seismicity

Elementary cluster analysis of induced seismicity in a South African gold mine has shown that there is a clear interaction amongst the clusters; and that the level of the interaction is a function of the distance. The clusering algorithm used is an adaptation of the single-link cluster analysis which considers both three-dimensional space and time. A high level of interaction between the clusters is demonstrated from the cross-correlation analysis of seismic activity rates and radiated energy. A distinct decrease in the value of correlation coefficients was detectable as distance increased. This was somewhat surprising, considering the simplicity of the technique used. Since no attempt is made to study the physical mechanisms of interaction, these results are very preliminary, but interesting from an observational point of view.