Physical structure features of the crust at southeast region of Tibetan Plateau

Chemical reactions of plagioclase, biotite and their single minerals, as well as a mineral mixture of (plagioclase+biotite+quartz), with KCl and (KCl+KHCO₃) solutions were carried out at 150–400°C and 50–80 MPa. Experiments show that alkaline fluid promotes plagioclase’s changing into potash feldspar, while acid fluid helps plagioclase, potash feldspar and biotite alteration form chlorite and sericite. After chemical reaction the acidity-alkalinity of solutions often changes reversely. It was observed that gold dissolved from the tube wall and recrystallized on the surfaces of biotite and pyrite. Therefore the transportation and enrichment of gold are related to the elementary effect of the fluid-mineral interfaces. Fe³⁺-Fe²⁺, as an oxidition-reduction agent, and volatile components Cl^- and CO₂ play important roles in the reaction process     

Preliminary Study on the Chemical Mapping of Individual Fluid Inclusion by Synchrotron X-ray Fluorescence Microprobe

Abstract: Synchrotron X-ray fluorescence analyses on individual hypersaline fluid inclusions were tested to using synchrotron source at Tsukuba (KEK), Japan. The XRF instrumentation at KEK meets the purpose of fluid inclusion analysis, nondestructive, multi–element, ppm detection limits, with micro spatial resolution. In practice, however, the quantitative chemical analysis of fluid inclusion requires further considerable data accumulation. Semi-quantitative distribution of elements (mass number > 25) in single fluid inclusion was obtained.     

Oxygen and Carbon Isotope Study of Calcite and Dolomite in the Disseminated Au-Ag Telluride Bulawan Deposit, Negros Island, Philippines

Abstract: The disseminated Au‐Ag telluride Bulawan deposit, Negros island, Philippines, is hosted by dacite porphyry breccia pipes which formed in a Middle Miocene dacite porphyry stock. Electrum and Au‐Ag tellurides occur mostly as grains intergrown with or filling voids between sphalerite, pyrite, chalcopyrite, galena and tennantite. Calcite, quartz and rare dolomite are the principal gangue minerals. Four types of alteration were recognized in the deposit, namely; propylitic, K‐feldspar‐sericitic, sericitic and carbonate alteration. Carbonate alteration is correlatable to the gold deposition stage and occurs mostly along fault zones. The δ¹⁸O and δ¹³C compositions of calcite and dolomite in propylite zone and ore‐stage dacite porphyry breccia were determined. The δ¹⁸O values of calcite in propylitized andesite range from +12.2 to +14.7%, and their δ¹³C values range from ‐6.1 to ‐1.0%. The δ¹⁸O values of calcite and dolomite in sericite‐ and carbonate‐altered, mineralized dacite porphyry breccia and dacite porphyry rocks range from +15.1 to +23.1%, and the δ¹³C values of calcite and dolomite range from ‐3.9 to +0.9%. The δ¹⁸O and δ¹³C values of the hydrothermal fluids were estimated from inferred temperatures of formation on the basis of fluid inclusion microthermometry. The δ¹⁸O values of hydrothermal fluid for the propylitic alteration were calculated to be +8.5 ‐ +9.5%, assuming 375°C. On the other hand, the δ¹⁸O values of ore solutions for base metal and Au mineralization were computed to be +13.6 ‐ +14.6%, assuming 270°C. The hydrothermal fluids that formed the Bulawan deposit are dilute and ¹⁸O‐enriched fluids which reacted with ¹⁸O‐ and ¹³C‐rich wallrocks such as limestone.     

EXPERIMENTAL GEOCHEMISTRY STUDY ON GOLD IN WATER-ROCK REACTION UNDER THERMAL FLUID SYSTEM AT MESO-LOW TEMPERATURE

Based on the knowing geochemical characteristics of wall rock in the Mobin gold deposit and composition of fluid inclusion in ore,water-rock experiments were carried out,important achievements are acquired as following: Gold is mainly derived from the ore-bearing wall rock,i,e.,a series of epimetamorphic clastic gritstone,sandy slate,and tuffaceous slate in the Wuqiang Banxi Formation,Wuqiangxi Group.In thermal system with middle-low temperature chlorine gold may be derived form stable complex ions,so it is quite important in gold metallogenic process.Sulphur and chlorine perform as the major negative ions throughout the gold activation and migration movement.The concentration of sulphur and chlorine ions,pH value and temperature are of deciding significance for gold activation,migration and precipitation.     

Thermal convection in a cylindrical annulus with a non-Newtonian outer surface

This study presents the results of numerical simulations of a model for lithospheremantle coupling in a terrestrial type planet. To first order, a geologically active terrestrial type planet may consist of a metallic core, silicate mantle and lithosphere, with the lithosphere being rheologically different from the mantle. Therefore we have developed a numerical model consisting of a thin non-Newtonian fluid hoop that is dynamically coupled to a thick Newtonian fluid cylindrical annulus. Thus the rheological dichotomy between mantle and lithosphere is built into the model. Time-dependent calculations show the existence of at least two regimes of behaviors. In one regime, the behavior of the hoop switches between periods characterized by low or high speeds, in response to changes in convective vigor and planform. This regime may apply to the planet Venus where the available evidence indicates that prior to 500 myr ago, the planet was resurfaced on a time scale of <100 myr. Since that time, large-scale tectonic activity on Venus has been sharply curtailed. In the other regime, which is more like plate tectonics on Earth, the hoop speeds rise and fall on short time scales.     

Pore fluid pressure effects in anisotropic rocks: Mechanisms of induced seismicity and weak faults

Many observations and studies indicate that pore fluid pressure in the crustal rocks plays an important role in deformation, faulting, and earthquake processes. Conventional models of pore pressure effects often assume isotropic porous rocks and yield the nondeviatoric pressure effects which seem insufficient to explain diverse phenomena related to pore pressure variation, such as fluid-extraction induced seismicity and crustal weak faults. We derive the anisotropic effective stress law especially for transversely-isotropic and orthotropic rocks, and propose that the deviatoric effects of pore fluid pressure in anisotropic rocks not only affect rock effective strength but also cause variation of shear stresses. Such shear stress variations induced by either pore pressure buildup or pore pressure decline may lead to faulting instability and trigger earthquakes, and provide mechanisms for the failure of crustal weak faults with low level of shear stresses. We believe that the deviatoric effects of pore fluid pressure in anisotropic rocks are of wide application in studies of earthquake precursors and aftershocks, oil and gas reservoir characterization, enhanced oil recovery, and hydraulic fracturing.     

新疆吉木乃县塔斯特金矿成因探讨

塔斯特金矿床为一破碎带蚀变岩型金矿。通过稳定同位素、包裹体、成矿元素及成矿物理化学条件的研究,提出该矿的成矿溶液是岩浆水和大气降水之混合物。成矿元素主要来自深源侵入的二长花岗岩。成矿温度为中偏高温。成矿溶液为高盐度、高密度和高挥发份条件。为深源岩浆侵入的花岗岩中破碎蚀变岩型金矿。     

Silica mobility and fluid movement during metamorphism of the Connemara schists, Ireland

Quartz veins are developed in a wide range of metasediment types in the upper amphibolite facies rocks of Connemara, and attest to considerable migration of silica. Contrary to common assumptions, there is clear evidence that these veins do not primarily result from movement of fluid to regions of lower P–T down the regional geothermal gradient. Under amphibolite facies conditions, a dilute chloride fluid moving down temperature has the potential to alter 60g of plagioclase to muscovite for each gram of vein quartz precipitated, while cooling over the temperature interval from 650 to 500° C. The absence of significant metasomatic effects in the vein walls effectively precludes a simple origin from such through-flowing, externally derived fluids. The oxygen isotopic composition of matrix quartz shows considerable differences between different rock types (quartzite, pelite and marble), with a range of δ¹⁸O_SMOW from c.+ 11.5% (quartzite) to + 18.5% (marble). In each rock type, vein quartz compositions closely match those of the matrix quartz. These results demonstrate the importance of local segregation processes in the formation of veins, and suggest that fluid convection cells were not developed during metamorphism on a scale larger than the individual sedimentary formations, if at all. Both oxygen isotope data and the absence of metasomatism indicate that veins form primarily by segregation of quartz from the host lithologies, with only a relatively minor component of through flow of externally derived fluid. Veins are clearly not the major pathways of metamorphic dewatering. It is proposed that abundant veins in the predominantly pelitic Ballynakill Formation formed during peak metamorphic D3 folding because the formation was embrittled by high fluid pressures but was capped by impermeable marble. Hence the pelitic formation fractured repeatedly and the pore fluid drained through the fractures to form veins, while irreversible loss through the rest of the succession was a much less important process. In the central mountains of Connemara, rather pure, unreactive quartzites are cut by widely spaced, laterally extensive quartz veins that are axial planar to D3 folds. These veins may mark pathways whereby metamorphic fluid made its way through the massive impermeable quartzite from lower parts of the nappe pile, but here too, oxygen isotope data indicate considerable segregation of locally derived quartz, reflecting the importance of pumping of fluid between wail rocks and fractures relative to the component of through flow.     

Spatial averaging of hydraulic conductivity in three-dimensional heterogeneous porous media

Numerical models of groundwater flow require the assignment of hydraulic conductivities to large grid blocks discretizing the flow domain; however, conductivity data is usually available only at the much smaller scale of core samples. This paper describes a geostatistical model for hydraulic conductivity at both the core or point scale and that of grid blocks. Conductivity at the block scale is obtained empirically as a spatial power-average of point scale values. Assuming a multivariate Gaussian model for point log-conductivity, expressions are derived for the ensemble mean and variance of block conductivity. The expression for the ensemble mean of block scale conductivity is found to be similar to an expression for the ensemble effective conductivity of an infinite field derived analytically by earlier authors. Here, block conductivities obtained by power averaging are compared with effective conductivities obtained from a numerical flow model and are found to be in excellent agreement for a suitably chosen averaging exponent. This agreement deteriorates gradually as the log variance of conductivity increases beyond 2. For arbitrary flow field geometry and anisotropic conductivity covariances, the averaging exponent can be calibrated by recourse to numerical flow experiments. For cubic fields and an isotropic spatial covariance, the averaging exponent is found to be 1/3. In this particular case, it was found that flow field discretization at the block scale through local averaging of point conductivities gave similar results to those obtained directly using a point scale discretization of the flow field.     

吉黑东部斑岩型-浅成热液型铜金矿床多重成矿模型

通过四个典型矿床（小西南岔、闹枝、五凤和刺猬沟）的对比，发现它们在形成时间-空间一成因上既相互联系，又相互区别。小西南岔和闹枝矿床存在三个成矿流体系统：加热天水系统(A)、排放流体系统(B)、蒸气缕(steam plume)反应系统(C)；五凤和刺猬沟矿床只有一个成矿流体系统，即排放流体系统(B)。前者的成矿流体由浅成岩浆房的补给；后者的成矿流体主要为循环天水，浅成岩浆房的补给不明显。小西南岔金铜矿床产于中生代火山岩盆地边缘的隆起带，属于斑岩型矿床；闹枝金（铜）矿床产于中生代火山岩盆地内的断隆块，属于斑岩-浅成热液过渡型矿床；五凤和刺猬沟金（银）矿床产于中生代火山岩盆地内断裂带，属于浅成热液型矿床。在区域成矿上，由浅入深，浅成热液型斑岩-浅成热液过渡型和斑岩型构成多重成矿模型。