中国东部幔源气体同位素地球化学

中国东部地幔岩包体及其单矿物中发育有大量的流体包裹体，采用阶段加热真空热爆的 方法脱出幔源包裹体中的气体，测试了气体的碳、氧、氦、氮等同位素组成。ＣＯ２的σ１３℃普遍较低， 主峰值为（－１８～－２２）×１０－3 ，多数样品在高温下的 σ１３℃普遍小于低温下的对应值。氧同位素变 化也很大，从－３．４×１０－３至２５．５×１０－３（ＳＭＯＷ），并呈现多峰的特征。σ１８Ｏ与σ１Ｃ３具有很好的相 关性，可能受控于同种分馏机制。Ｃ、Ｏ同位素组成特征表明，中国东部大陆地幔具有很大的化学不 均一性，可能是由地幔碳的多样性、源区的不均一性或地幔交代作用所致。氧同位素的变化可能是 结晶作用、去气作用或地壳物质混染所至。４Ｈｅ含量变化范围为（０．２４～２５．００）×１０－８，３Ｈｅ／４Ｈｅ变 化范围为（０．４６～１２．８０）×１０－６，４０Ａｒ含量从０．９７×１０－６到３４．１８×１０－６，４０Ａｒ／３６Ａｒ变化范围为 ２５０．５８～１２０２。３Ｈｅ／４Ｈｅ的变化反映了亏损地幔和富集地幔的存在。不同地区４０Ａｒ／３６Ａｒ的巨大差 异显示了地幔脱气程度的不同，也说明在地幔演化中Ａｒ、Ｈｅ同位素地球化学行为的差异。     

四川牦牛坪稀土矿床矿物流体包裹体研究

对矿物流体包裹体进行分析的结果表明，牦牛坪稀土矿床的矿物中存在4种类型包裹体：（1）液-所耵；（2）液-气-固相；（3）纯气相；（4）固相，矿物包裹体显微测温结果显示牦牛坪矿床成矿温度从423℃至122℃；成矿流体的盐度ω（NaCl)为11.46%-14.36%质量分数，包裹体的成分分析结果显示流体中富含CO2和其他挥发性组分，并富含大量的不同成分的矿物雏晶，根据矿床地质特征和矿物包裹体的研究结果，作者认为本矿床的成矿作用是由碳酸岩岩浆气液流体的沸腾、充填和交代过程而实现的。     

Physical structure features of the crust at southeast region of Tibetan Plateau

Chemical reactions of plagioclase, biotite and their single minerals, as well as a mineral mixture of (plagioclase+biotite+quartz), with KCl and (KCl+KHCO₃) solutions were carried out at 150–400°C and 50–80 MPa. Experiments show that alkaline fluid promotes plagioclase’s changing into potash feldspar, while acid fluid helps plagioclase, potash feldspar and biotite alteration form chlorite and sericite. After chemical reaction the acidity-alkalinity of solutions often changes reversely. It was observed that gold dissolved from the tube wall and recrystallized on the surfaces of biotite and pyrite. Therefore the transportation and enrichment of gold are related to the elementary effect of the fluid-mineral interfaces. Fe³⁺-Fe²⁺, as an oxidition-reduction agent, and volatile components Cl^- and CO₂ play important roles in the reaction process     

Fault-controlled dolomitization at Swan Hills Simonette oil field (Devonian), deep basin west-central Alberta, Canada

The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (T_h=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (T_peak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more ⁸⁷Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on ⁸⁷Sr/⁸⁶Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and ²⁰⁶Pb/²⁰⁴Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.     

Dolomitization of the Waulsortian Limestone (Lower Carboniferous) in the Irish Midlands

The Waulsortian Limestone (Lower Carboniferous) of the southern Irish Midlands is dolomitized pervasively over a much larger region than previous studies have documented. This study indicates a complex, multistage, multiple fluid history for regional dolomitization. Partially and completely dolomitized sections of Waulsortian Limestones are characterized by finely crystalline (0·01–0·3 mm) planar dolomite. Planar replacive dolomite is commonly followed by coarse (≥0·5 mm) nonplanar replacive dolomite, and pervasive void‐filling saddle dolomite cement is frequently associated with Zn–Pb mineralization. Planar dolomite has average δ¹⁸O and δ¹³C values (‰ PDB) of –4·8 and 3·9 respectively. These are lower oxygen and slightly higher carbon isotope values than averages for marine limestones in the Waulsortian (δ¹⁸O=–2·2, δ¹³C=3·7). Mean C and O isotope values of planar replacive dolomite are also distinct from those of nonplanar and saddle dolomite cement (–7·0 and 3·3; –7·4 and 2·4 respectively). Fluid inclusions indicate a complex history involving at least three chemically and thermally distinct fluids during dolomite cementation. The petrography and geochemistry of planar dolomites are consistent with an early diagenetic origin, possibly in equilibrium with modified Carboniferous sea water. Where the Waulsortian was exposed to hydrothermal fluids (70–280 °C), planar dolomite underwent a neomorphic recrystallization to a coarser crystalline, planar and nonplanar dolomite characterized by lower δ¹⁸O values. Void‐filling dolomite cement is isotopically similar to nonplanar, replacive dolomite and reflects a similar origin from hydrothermal fluids. This history of multiple stages of dolomitization is significantly more complex than earlier models proposed for the Irish Midlands and provides a framework upon which to test competing models of regional vs. localized fluid flow.     

Fluid-rock history of granulite facies humite-marbles from Ambasamudram, southern India.

An extensive humite‐bearing marble horizon within a supracrustal sequence at Ambasamudram, southern India, was studied using petrological and stable isotopic techniques to define its metamorphic history and fluid characteristics. At peak metamorphic temperatures of 775±73°C, based on calcite‐graphite carbon isotope thermometry, the mineral assemblages suggest layer‐by‐layer control of fluid compositions. Clinohumite + calcite‐bearing assemblages suggest X_CO2 < 0.4 (at 700°C and 5 kbar), calcite + forsterite + K‐feldspar‐bearing assemblages suggest X_CO2>0.9 (at 790°C); and local wollastonite + scapolite + grossular‐bearing zones formed at X_CO2 of c. 0.3. Retrograde reaction textures such as scapolite + quartz symplectites after feldspar and calcite and replacement of dolomite + diopside or tremolite+dolomite after calcite+forsterite or calcite+clinohumite are indicative of retrogression under high X_CO2 conditions. Calcite preserves late Proterozoic carbon and oxygen isotopic signatures and the marble lacks evidence for extensive retrograde fluid infiltration, while during prograde metamorphism the possible infiltration of aqueous fluids did not produce significant isotopic resetting. Isotopic zonation of calcite and graphite grains was likely produced by localized CO₂ fluid infiltration during retrogression. Contrary to the widespread occurrence of humite‐marbles related to retrograde aqueous fluid infiltration, the Ambasamudram humite‐marbles record a prograde‐to‐peak metamorphic humite formation and retrogression under conditions of low X_H2O.     

Petrogenetic and Metallogenetic Background of the Dajing Cu–Sn–Ag–Pb–Zn Ore Deposit, Inner Mongolia, and Characteristics of the Mineralizing Fluid

Abstract: The Dajing Cu–Sn–Ag–Pb–Zn ore deposit, Inner Mongolia of China, is a fissure‐filling hydrothermal ore deposit that occurs within the Upper Permian Linxi group. No magmatic pluton and volcanic rocks outcrop on the surface of the deposit. Most of ore veins show clear‐cut boundary with country rocks. Wallrock alterations that include silicification, carbonation, chlori–tization, and sericitization are generally weak and occur in the close vicinity of ore veins. Mineralization is divided into three stages: (1) cassiterite–arsenopyrite–quartz stage, (2) sulfide stage, and (3) Pb–Zn–Ag–carbonate stage. These mineralization stages have distinct ranges of homogenization temperatures, 290–350C for Stage 1, 260–320C for Stage 2, and 150–250C for Stage 3. However, salinities for Stages 1, 2, and 3 overlap and range between 2.2 and 10.4 wt % NaCl equivalent. The dD values relative to V‐SMOW of inclusion water from quartz are lower than –88% and centered at –100 to –130%. The δ³⁴S values relative to CDT of sulfide ore minerals and δ¹³C values relative to PDB of carbonate gangue minerals, vary from –0.3 to +2.6%, and from –7.0 to –2.9%, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric‐derived water and the other from hypogene magma for sulfur and carbon species. Analyses of inclusion gas and liquid compositions are performed. The H₂O and CO₂ are the two most abundant gaseous components, whereas SO₄^2‐ and Cl^‐, and Na⁺, Ca²⁺, and K⁺ are the major anions and cations, respectively. A linear trend is shown on the gaseous H₂O versus CO₂ plot. Phase separation is excluded as cause for the trend on the basis of isotope data and fluid inclusion microthermometry. In addition, a weak wallrock alteration does not support fluid‐rock interaction as an efficient mechanism. Hence, the linear H₂O–CO₂ trend is interpreted in terms of absorption or dilution of CO₂–dominant magmatic vapor by meteoric‐derived water. Cooling effects resulting from dilution may have caused precipitation of ore minerals. Major and trace element compositions of regional granites show a high‐K calc–alkaline characteristics and an arc–affinity. Lead isotopic compositions of galena samples from the Dajing deposit exhibit elevated U/Pb and Th/Pb ratios. These characteristics indicate a common source of supra subduction zone mantle wedge for regional granites and metals from the Dajing deposit.     

Preliminary Study on the Chemical Mapping of Individual Fluid Inclusion by Synchrotron X-ray Fluorescence Microprobe

Abstract: Synchrotron X-ray fluorescence analyses on individual hypersaline fluid inclusions were tested to using synchrotron source at Tsukuba (KEK), Japan. The XRF instrumentation at KEK meets the purpose of fluid inclusion analysis, nondestructive, multi–element, ppm detection limits, with micro spatial resolution. In practice, however, the quantitative chemical analysis of fluid inclusion requires further considerable data accumulation. Semi-quantitative distribution of elements (mass number > 25) in single fluid inclusion was obtained.     

Oxygen and Carbon Isotope Study of Calcite and Dolomite in the Disseminated Au-Ag Telluride Bulawan Deposit, Negros Island, Philippines

Abstract: The disseminated Au‐Ag telluride Bulawan deposit, Negros island, Philippines, is hosted by dacite porphyry breccia pipes which formed in a Middle Miocene dacite porphyry stock. Electrum and Au‐Ag tellurides occur mostly as grains intergrown with or filling voids between sphalerite, pyrite, chalcopyrite, galena and tennantite. Calcite, quartz and rare dolomite are the principal gangue minerals. Four types of alteration were recognized in the deposit, namely; propylitic, K‐feldspar‐sericitic, sericitic and carbonate alteration. Carbonate alteration is correlatable to the gold deposition stage and occurs mostly along fault zones. The δ¹⁸O and δ¹³C compositions of calcite and dolomite in propylite zone and ore‐stage dacite porphyry breccia were determined. The δ¹⁸O values of calcite in propylitized andesite range from +12.2 to +14.7%, and their δ¹³C values range from ‐6.1 to ‐1.0%. The δ¹⁸O values of calcite and dolomite in sericite‐ and carbonate‐altered, mineralized dacite porphyry breccia and dacite porphyry rocks range from +15.1 to +23.1%, and the δ¹³C values of calcite and dolomite range from ‐3.9 to +0.9%. The δ¹⁸O and δ¹³C values of the hydrothermal fluids were estimated from inferred temperatures of formation on the basis of fluid inclusion microthermometry. The δ¹⁸O values of hydrothermal fluid for the propylitic alteration were calculated to be +8.5 ‐ +9.5%, assuming 375°C. On the other hand, the δ¹⁸O values of ore solutions for base metal and Au mineralization were computed to be +13.6 ‐ +14.6%, assuming 270°C. The hydrothermal fluids that formed the Bulawan deposit are dilute and ¹⁸O‐enriched fluids which reacted with ¹⁸O‐ and ¹³C‐rich wallrocks such as limestone.     

EXPERIMENTAL GEOCHEMISTRY STUDY ON GOLD IN WATER-ROCK REACTION UNDER THERMAL FLUID SYSTEM AT MESO-LOW TEMPERATURE

Based on the knowing geochemical characteristics of wall rock in the Mobin gold deposit and composition of fluid inclusion in ore,water-rock experiments were carried out,important achievements are acquired as following: Gold is mainly derived from the ore-bearing wall rock,i,e.,a series of epimetamorphic clastic gritstone,sandy slate,and tuffaceous slate in the Wuqiang Banxi Formation,Wuqiangxi Group.In thermal system with middle-low temperature chlorine gold may be derived form stable complex ions,so it is quite important in gold metallogenic process.Sulphur and chlorine perform as the major negative ions throughout the gold activation and migration movement.The concentration of sulphur and chlorine ions,pH value and temperature are of deciding significance for gold activation,migration and precipitation.