单井与群井结合抽水试验在地面沉降实测中的应用研究

以天津市某工程项目抽水试验数据为实测基本资料,目的是确定地基土的渗透性和富水性,计算含水层的水文地质参数,并实时监测试验期间地面沉降监测结果。结果表明,单井和群井抽水试验在抽水过程中,地面高程呈现出下降的趋势,累计达到最大沉降量,达到23. 57 mm,随着抽水时间较短和抽水时间较长等原因,在地面具有附加荷载时,沉降变大。因此,试验实时监测可以有效预防存在问题,为工程的设计与施工提供安全的风险控制。     

内蒙古二连盆地中部古河道型铀矿床中烃类流体特征与铀成矿关系

通过对二连盆地中部下白垩统赛汉组上段古河道型铀矿床砂岩中的酸解烃特征进行分析,探讨了酸解烃中烃类气体组成特征、成因及来源,并结合该区铀矿分布富集的地质特征初步探讨了该区油气与砂岩型铀成矿关系。结果表明,赛汉组上段古河道砂体中CH_4及C_2~+含量与铀含量呈正比,且在氧化带、氧化还原过渡带和还原带内烃类含量具明显的分带性。酸解烃气体组成特征参数C_1/ΣC、C_1/C_2+、C_2/iC_4、C_2/C_3、iC_4/nC_4、iC_5/nC_5、ln(C_1/C_2)、ln(C_2/C_3)表明,研究区赛汉组上段古河道砂体中的烃类气为有机成因的油型气,烃类气主要处于成熟-高成熟阶段,主要为原油伴生气和原油裂解气。根据研究区烃源岩地球化学特征及生排烃史分析认为,该区下白垩统赛汉组上段古河道型铀矿床中烃类气主要来源于下白垩统阿尔善组(K_1ba)湖相腐泥型或偏腐泥型烃源岩,其次为腾一段(K_1bt~1)低熟-成熟阶段的湖相烃源岩。研究区深大断裂、不整合面、主砂体或裂隙是该区深部油气向上逸散的主要通道,深大断裂及不整合面附近应是该区砂岩型铀矿找矿的重点方向;油气在该区古河道砂岩型铀成矿作用过程中具有吸附作用、还原作用和保矿作用,区内砂岩型铀成矿期次、油气聚散史明显受控于晚白垩世末—古新世期的反转构造作用。     

Ore Genesis and Tectonic Significance of the Xiaojiashan Tungsten Deposit,Eastern Tianshan,Xinjiang, China: Evidence from Geology,Fluid Inclusions,and Stable Isotope Geochemistry

The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D₂d ₁²). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of T_h, and white quartz veins have 154–312°C of T_h. The laser‐Raman test shows that CO₂ is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO₂, H₂O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl^?, Na⁺. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H₂O–CO₂, low salinity, and H₂O–CO₂–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.     

Genesis of the Xiuwenghala Gold Deposit in the Beishan Orogen,Northwest China: Evidence from Geology,Fluid Inclusion,and H–O–S–Pb Isotopes

The Xiuwenghala gold deposit is located in the Beishan Orogen of the southern Central Asian Orogenic Belt. The vein/lenticular gold orebodies are controlled by Northeast‐trending faults and are hosted mainly in the brecciated/altered tuff and rhyolite porphyry of the Lower Carboniferous Baishan Formation. Metallic minerals include mainly pyrite and minor chalcopyrite, arsenopyrite, galena, and sphalerite, whilst nonmetallic minerals include quartz, chalcedony, sericite, chlorite, and calcite. Hydrothermal alterations consist of silicic, sericite, chlorite, and carbonate. Alteration/mineralization processes comprise three stages: pre‐ore silicic alteration (Stage I), syn‐ore quartz‐chalcedony‐polymetallic sulfide mineralization (Stage II), and post‐ore quartz‐calcite veining (Stage III). Fluid inclusions (FIs) in quartz and calcite are dominated by L‐type with minor V‐type and lack any daughter mineral‐bearing or CO₂‐rich/‐bearing inclusions. From Stages I to III, the FIs homogenized at 240–260°C, 220–250°C, and 150–190°C, with corresponding salinities of 2.9–10.9, 3.2–11.1, and 2.9–11.9 wt.% NaCl eqv., respectively. The mineralization depth at Xiuwenghala is estimated to be relatively shallow (<1 km). FI results indicate that the ore‐forming fluids belong to a low to medium‐temperature, low‐salinity, and low‐density NaCl‐H₂O system. The values decrease from Stage I to III (3.7‰, 1.7–2.4‰, and ?1.7 to 0.9‰, respectively), and a similar trend is found for their values (?104 to ?90‰, ?126 to ?86‰, and ?130 to ?106‰, respectively). This indicates that the fluid source gradually evolved from magmatic to meteoric. δ³⁴S values of the hydrothermal pyrites (?3.0 to 0.0‰; avg. ?1.1‰) resemble those of typical magmatic/mantle‐derived sulfides. Pyrite Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.409–18.767, ²⁰⁷Pb/²⁰⁴Pb = 15.600–15.715, ²⁰⁸Pb^/204Pb = 38.173–38.654) are similar to those of the (sub)volcanic ore host, indicating that the origin of ore‐forming material was mainly the upper crustal (sub)volcanic rocks. Integrating evidence from geology, FIs, and H–O–S–Pb isotopes, we suggest that Xiuwenghala is best classified as a low‐sulfidation epithermal gold deposit.     

Mineralogy,Fluid Inclusions,and Sulfur Isotopes of the Huanzala Deposits,Peru: Early Skarn and Late Polymetallic Replacement Style Mineralizations

Carbonate‐replacement polymetallic mineralization at the Huanzala deposits (9°51′S, 77°00′W) was conducted in two contrasting stages that occurred in almost the same location. Early‐stage mineralization has a relation with a granodiorite porphyry stock, whereas the late‐stage mineralization is genetically associated with quartz porphyry sills. The early stage involved low to intermediate sulfidation Cu–Zn–(Pb) mineralization associated with metasomatic skarn, and the late stage involved high to intermediate sulfidation Cu–Zn–Pb–(Mn) mineralization associated with hydrothermal alteration characterized by paragonitic sericitization. The orebodies are hosted by steeply dipping (approximately 60°NE) Lower Cretaceous carbonate rocks in a relatively narrow range of approximately 4 km in horizontal extent and less than 1 km in depth. The pathway of the early‐stage brine‐derived fluids (300–>400°C, >33 wt% NaCl equivalent) along a plot of log against 1000/T is best explained by the progressive dual decline of the value and the temperature under rock‐buffering conditions; this decline saw the pathway progress through the stability field of pyrrhotite to reach that of pyrite and promoted a decrease in FeS from 14.5 to 1.6 mol% in the sphalerite. In contrast, an explanation for the pathway of the late‐stage fluids (140–290°C, 3–13 wt% NaCl equivalent) is given by an almost isothermal decline at approximately 270°C, with passing through the stability field of pyrite–bornite to reach that of chalcopyrite, promoting an increase in FeS from 0.1 to 1.6 mol% in the sphalerite, suggesting gas‐buffering conditions. The ore formation pressure records in the fluid inclusions illustrate an approximately 2‐km erosion during the roughly 2‐Myr total lifetime of the hydrothermal system.     

Cotton canopy reflectance under variable solar zenith angles: Implications of use in evapotranspiration models

Evapotranspiration (ET) is an important parameter in hydrologic processes and modelling. In agricultural watersheds with competing uses of fresh water including irrigated agriculture, estimating crop evapotranspiration (ET_c) accurately is critical for improving irrigation system and basin water management. The use of remote sensing-based basal crop coefficients is becoming a common method for estimating crop evapotranspiration for multiple crops over large areas. The Normalized Difference Vegetation Index (NDVI) and the Soil Adjusted Vegetation Index (SAVI), based on reflectance in the red and near-infrared bands, are commonly used for this purpose. In this paper, we examine the effects of row crop orientation and soil background darkening due to shading and soil surface wetness on these two vegetation indices through modelling, coupled with a field experiment where canopy reflectance of a cotton crop at different solar zenith angles, was measured with a portable radiometer. The results show that the NDVI is significantly more affected than the SAVI by background shading and soil surface wetness, especially in north–south oriented rows at higher latitudes and could lead to a potential overestimation of crop evapotranspiration and irrigation water demand if used for basal crop coefficient estimation. Relationships between the analysed vegetation indices and canopy biophysical parameters such as crop height, fraction of cover and leaf area index also were developed for both indices.     

Characterization of sudden and sustained base flow jump hydrologic behaviour in the humid seasonal tropics of the Panama Canal Watershed

Base flows are important for tropical regions with pronounced dry seasons, which are facing increasing water demands. Base flow generation, however, is one of the most challenging hydrological processes to characterize in the tropics. In many years during the May–December wet season in the Panama Canal Watershed (PCW), base flows in rivers abruptly increase. This increase persists until the start of the December–April dry season. Understanding this unusual base flow jump (BFJ) behaviour is critical to improve water provisioning in the seasonal tropics, especially during droughts and extended dry seasons. This study developed an integrated approach combining piecewise regression on cumulative average base flow and sensitivity analysis to calculate the timing and magnitude of BFJ. Rainfall, forest cover, mean land surface slope, catchment area, and estimated subsurface storage were tested as predictors for the occurrence and magnitude of the BFJs in seven subcatchments of the PCW. Sensitivity analysis on correlated predictors allowed ranking of predictor contributions due to isolated and cross-correlation effects. Correlations between observed BFJs and BFJs predicted by watershed and rainfall-related predictors were 0.92 and 0.65 for BFJ timing and magnitude, respectively. Forest cover was the second most significant predictor after cumulative rainfall for jump magnitude, owing to larger subsurface storage and groundwater recharge in forests than pastures. Catchments in the mountainous eastern PCW always generated larger jumps due to their higher rainfall and greater forest cover than the western PCW catchments. The cross-correlations between predictors contributed to more than 50% of the jump variances. The results demonstrate the importance of rainfall gradient and catchment characteristics in affecting the sudden and sustained BFJs, which can help inform land management decisions intended to enhance water supplies in the tropics. This study underscores the need for more research to further understand the hydrological processes involved in the BFJ phenomenon, including better BFJ models and field characterizations, to help improve tropical ecosystem services under a changing environment.     

Solid–fluid transition modelling in geomaterials and application to a mudflow interacting with an obstacle

Given the contrasting behaviour observed for geomaterials, for example, during landslides of the flow type, this contribution proposes an original constitutive model, which associates both an elasto‐plastic relation and a Bingham viscous law linked by a mechanical transition criterion. This last is defined as the second‐order work sign for each material point, which is a general criterion for divergence instabilities. Finite element method with Lagrangian integration points is chosen as a framework for implementing the new model because of its well‐known ability to deal with both solid and fluid behaviours in large deformation processes. A first boundary model considering a sample of initially stable soil, a slope and an obstacle is performed. The results show the power of the constitutive model because the consistent evolution of initiation, propagation and arrest of the mudflow is described. A parametric study is led on various plastic and viscous parameters to determine their influence on the flow development and arrest. Finally, forces against the obstacle are compared with good agreement with those of other authors for the same geometry and a pure viscous behaviour. Copyright © 2014 John Wiley & Sons, Ltd.     

初论成矿场与矿产勘查意义

成矿场是指地质历史时期某成矿地区引起岩石变形的应力场,承载成矿作用引起流体效应的流体场,以及成矿元素迁移、沉淀、富集、叠加改造形成的物质场的总称.分析了一个成矿地区应力场、流体场、物质场的空间关系、研究内容与研究方法.根据成矿背景、控制因素、成矿环境将其分为7类成矿场,即:逆冲(推覆)-后伸展构造背景成矿场、走滑-伸展(伸展-走滑)-后逆冲构造背景成矿场、中酸性火山(次火山)岩浆活动背景成矿场、基性-超基性岩浆活动背景成矿场、盆地裂谷-海底喷流环境成矿场、外生海相建造环境成矿场、外生陆相建造环境成矿场.对前5类成矿场(以内生矿产为主)进行了系统的内涵表述.在此基础上对前5类成矿场的矿产勘查过程中关键地质因素进行了归纳分析,这对具体矿产勘查工作具有现实的指导意义.     

青藏高原大尺度地表流体的重力效应特征分析

基于2002~2017年三维大气再分析模型、水文模式及GRACE卫星重力数据,采用负荷格林函数和卫星重力反演方法分析青藏高原大尺度地表流体的重力效应特征。结果表明,青藏高原地区大气扣除季节项前后的重力效应峰对峰变化介于1.9~10.7 μGal和1.1~4.6 μGal,其负荷效应呈现出显著的季节性特征;土壤水和积雪扣除季节项前后的重力效应峰对峰变化介于0.9~9.9 μGal和0.7~8.3 μGal,其负荷效应呈现出显著的季节性和年际变化特征;GRACE时变重力场扣除季节项前后的重力变化峰对峰变化介于4.4~24.1 μGal和3.4~18.3 μGal,考虑观测误差、构造运动和信号泄漏误差的影响,其显著的季节性和年际变化反映了多种地表流体的综合影响。